Over 12,000 satisfied customersDuPont TYVEK® 500 PL309NP Lab Coat
Product description
Related Content
- Collar
- Elasticated sleeve ends
- Zipper closure
- Inside seams
- Antistatic finish
- Without pockets
The DuPont logo, DuPont™, The miracles of science™ and all products identified with ™ or ® are trademarks or registered trademarks of DuPont de Nemours, Inc. DuPont's trademarks may not be used in connection with any product or service that is not DuPont's.
Polyethylene spunbond
EN 13034:2005 A1:2009 Type 6, EN 14126:2003
Defines the primary substance used in construction, affecting durability, protection level, comfort, and resistance to workplace hazards and weather conditions.
Indicates the jacket's primary hue, affecting visibility, practicality, and compliance with workplace safety standards or team identification.
Defines the jacket's structural design, such as hooded, parka, or bomber, affecting weather protection, visibility, and functionality for specific work environments.
Determines how far the jacket extends down the body, affecting mobility, protection coverage, and compatibility with tool belts or other workwear.
Defines how sleeve ends are finished and secured at the wrist, affecting weather protection, comfort, and compatibility with work gloves.
Defines the neck area design that affects weather protection, comfort, and compatibility with safety equipment like helmets and other PPE.
The mechanism that secures the garment, affecting ease of use, security, and functionality. Different styles offer varying levels of quick access and durability.
- Machine Washable
- Electrical Protection
- Chemical Resistance
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN 14126:1999 is a European standard that sets guidelines for the protection of medical clothing against infective agents. It specifies the minimum requirements for the protection of medical clothing, including the material properties, design, and construction of the clothing. Testing includes things like barrier resistance, penetration resistance and filtration efficiency. Possible test results would include pass or fail based on whether the clothing meets the safety and performance requirements outlined in the standard.
EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.
Test results
Liquid Chemical Protection Type 6EN 13034:2005 specifies the requirements and test methods for protective clothing that provides limited protection against liquid chemicals, designated as Type 6. The 'Type 6' classification indicates that the clothing has been tested and found capable of resisting light spray and minor splashes of liquid chemicals. This test method assesses the fabric's ability to prevent penetration from a synthetic blood solution sprayed at the garment at different angles and pressures, simulating realistic conditions where accidental chemical splashes might occur. Protective clothing that achieves this classification is essential for workers in industries such as chemical manufacturing, painting, or pesticide application, where there is a risk of exposure to harmful liquids but full immersion is not expected, thus enhancing worker safety by providing sufficient protection in low-volume chemical exposure scenarios.
PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
Asatex delivery terms
Free delivery for all Asatex products
2 966,72 kr
Price per 50 packages (50 pcs)
59,33 kr / piece
Other products you may like
Similar products you may like
Recommended for you
Asatex
Delivery time: 4 business days
Supplier shipping fee 55,20 €
Free shipping on orders over 1 650,00 €
Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
List products you’re looking for and we’ll find the best products and prices for you – all for free.
--- / Customer service