- Collar
- Elasticated cuffs
- five press studs
- two pockets
- thickness: 50g/m²

polypropylene spunbond 50g/m²

- face elastic for optimum adjustment of the hood
- Breathable
- Elasticated arm and leg cuffs
- elasticated waist
- zipper cover

Polypropylene spunbond 50g/m²

- Partially coated back of the hand
- knitted cuff
- high abrasion resistance
- oil and grease repellent

100 % cotton

EN ISO 21420:2020, EN 388:2016 A1:2018 [3.0.1.1.X]

- Premium quality
- Partially coated back of the hand
- Knitted cuff
- High abrasion resistance
- Good sense of touch
- Oil and grease repellent

100% cotton

EN ISO 21420:2020, EN 388:2016 A1:2018 [3.1.1.1.X]

- fully coated
- knitted waistband
- high abrasion resistance
- oil and grease repellent

100% cotton

EN ISO 21420:2020, EN 388:2016 A1:2018 [3.0.1.1.X]

- steel toe cap
- Steel midsole
- Breathable textile lining
- Perforated insole
- Slip-resistant 2-layer PUR outsole
- Antistatic sole
- Abrasion-resistant toe and heel protection
- Shaft edge and tongue padding
- Quick lacing eyelets
- Textile pocket on the collar

Suede leather and textile

EN ISO 20345:2011 S1P SRC, EN ISO 20344:2011

- Standards pictogram patch emblem
- Waistband with knitted insert and wide belt loops
- 2 side pockets
- 2 back pockets with flap and press stud fastening
- Ruler pocket on the right with flap
- Front left leg pocket with flap and Velcro fastener
- Reinforced ergonomic knee pocket with Velcro fastener
- Knitted insert at the back of the waistband and in the calf area
- Segmented reflective triangles

79 % cotton, 20 % polyester, 1 % other fibers (antistatic), permanently flame-retardant finish and FC finish, approx. 350 g/m²

EN 13034:2005 A1:2009, EN ISO 13688:2013, EN 1149-5:2018 in combination with EN 1149-3:2004, IEC 61482-2:2018 in combination with IEC 61482-1-2 2014, EN ISO 11611:2015 class 1 A1, EN ISO 11612:2015 A1 B1 C1 E1

- Standards pictogram patch emblem
- Stand-up collar with press stud
- Concealed press stud placket
- 2 chest and side pockets with flaps and Velcro fastener
- 2 inside pockets with zipper
- Ergonomically shaped sleeves with elbow patches
- Knitted insert on the side of the torso and sleeve hem
- Segmented reflective triangles

79 % cotton, 20 % polyester, 1 % other fibers (antistatic), permanently flame-retardant finish and FC finish, approx. 350 g/m²

EN ISO 13688:2013, EN 13034:2005 A1:2009, EN 1149-5:2018 in combination with EN 1149-3:2004, EN ISO 11611:2015 Class 1 A1, IEC 61482-2:2018 in combination with IEC 61482-1-2 Ed.2:2014 Class 1, EN ISO 11612:2015 A1 B1 C1 E1

- Standards pictogram patch emblem
- Stretch straps with buckle buckles
- Bib pocket and flap with Velcro and zipper
- Waistband with knitted insert and wide belt loops
- 2 side pockets
- 2 back pockets with flap and press stud fastening
- Ruler pocket on the right with flap
- Front left leg pocket with flap and Velcro fastener
- Reinforced ergonomic knee pocket with Velcro fastener
- Knitted insert at the back of the waistband and in the calf area
- Segmented reflective triangles

79 % cotton, 20 % polyester, 1 % other fibers (antistatic), permanently flame-retardant finish and FC finish, approx. 350 g/m²

EN ISO 13688:2013, EN 13034:2005 A1:2009, EN 1149-5:2018 in combination with EN 1149-3:2004, EN ISO 11611:2015 Class 1 A1, IEC 61482-2:2018 in combination with IEC 61482-1-2 Ed.2:2014 Class 1, EN ISO 11612:2015 A1 B1 C1 E1

Asatex PREVENT® High visibility pilot jacket

- quilted lining
- welded seams
- detachable sleeves
- hood in collar
- two slash pockets and two breast pockets
- one inside pocket
- fleece collar
- adjustable cuffs with press studs

100 % polyester

EN ISO 13688:2013, EN 343:2019 [3.1.X], EN ISO 20471:2013 A1:2016 Class 3

EN ISO 9073-4:2021 is a standard that sets rules for testing and measuring the performance of textile fabrics. It specifies the test methods and performance requirements for the resistance of textile fabrics to water penetration, which refers to how well the fabric repels water and prevents it from penetrating the fibers. The test results are measured in terms of the fabric's resistance to water penetration. The performance requirement is that the textile fabric must meet certain standards for resistance to water penetration, meaning it should repel water well and prevent it from penetrating the fibers.

EN ISO 9073-4:1997 is a standard that sets rules for testing and measuring the performance of textile fabrics. It specifies the test methods and performance requirements for the resistance of textile fabrics to water penetration, which refers to how well the fabric repels water and prevents it from penetrating the fibers. The test results are measured in terms of the fabric's resistance to water penetration. The performance requirement is that the textile fabric must meet certain standards for resistance to water penetration, meaning it should repel water well and prevent it from penetrating the fibers.

Waist style refers to the design or cut of the waistline of a garment, such as a dress, skirt, or pants. There are many different types of waist styles, such as high-waisted, natural waist, empire waist and low-waisted. The requirements for waist style depend on the intended use of the garment and the desired look or function. For example, a high-waisted dress or skirt might be more suitable for a formal event, while a low-waisted jeans might be more suitable for a casual outing. Additionally, the waist style can also depend on the body shape and personal preferences of the wearer, as certain waist styles can flatter certain body shapes more than others.

A drawstring is a type of cord or string that is used to adjust the opening of a bag or a garment. It is usually made of a durable and strong material, such as nylon or cotton. Drawstrings are typically used to cinch or adjust the opening of a bag or a garment, and to keep it closed. They can be found in different shapes and sizes and can be used in different ways, like in hoodies, pants, or bags. The requirements for a drawstring typically include being made of a durable and strong material, and having a size and length that is suitable for the intended use. The drawstring should be able to withstand the weight and tension of the object it is holding and should be able to hold the object securely.

A belt is a strip of material worn around the waist to hold up clothing or as a fashion accessory. The requirements for a belt can vary depending on the intended purpose, but most belts will have a buckle for fastening and adjusting the fit.

Strings are thin, flexible pieces of material that are typically made of nylon, metal, or gut. They are used in a wide range of applications, such as musical instruments, clothing, and packaging. The requirements for strings depend on their intended use. For example, strings for musical instruments need to be of the right thickness and tension to produce the desired sound, strings for clothing need to be strong and durable, and strings for packaging need to be able to hold the package securely. Strings can also be used in sports like tennis, badminton and archery, they are often tightly stretched across a frame to create a trampoline like surface. They can also be used in construction, such as in scaffolding or as a guide for a crane.

Seam material refers to the type of thread or other material used to sew or join two pieces of fabric together in a garment, bag or other item. The seam material is used to provide strength, durability and to enhance the appearance of the item. There are many different types of seam materials, such as cotton, polyester, nylon, and silk. The requirements for seam material depend on the intended use of the item, the desired level of strength, durability and the desired look. For example, a polyester seam might be more suitable for a sportswear, while a silk seam might be more suitable for a formal wear. Additionally, seam material can also depend on personal preferences, such as the type of fabric and the desired level of durability.

A material is something that is made from different substances or elements, like wood, metal, plastic, or fabric. It can be used to make things like clothes, furniture, and buildings. Different materials have different properties and can be used for different purposes. Some materials are stronger than others, some are more flexible, and some are better at resisting heat or cold. Some are made from natural sources, while others are synthetic. The requirements for a material depend on the specific use it will be put to.

Color is a visual characteristic of objects, surfaces, or light that is determined by the way it reflects or emits light. Color can be described by its hue, saturation, and brightness.
The requirements for what is considered a "color" can vary depending on the context, but generally it should be a visual characteristic of an object, surface, or light that is determined by the way it reflects or emits light.

Seam style refers to the way that two pieces of fabric are joined together, it can also refer to the way the stitching is applied. The requirements for seam style will vary depending on the intended use and the characteristics of the fabric. For example, a flat seam is suitable for lightweight fabrics, while a French seam is suitable for heavier fabrics. A seam that is reinforced with a seam binding is stronger than a seam that is not reinforced. And a seam that is sewn with a zigzag stitch is more flexible than a seam that is sewn with a straight stitch.

Taped refers to an object or a surface that has been sealed or reinforced by attaching a strip of adhesive material, commonly known as tape, to it. Taping can be used for different purposes such as holding, joining, or covering. The requirements for an object to be taped are that the object should be clean and dry, and that the tape should be suitable for the object and the purpose. Taping can be used for different applications like packaging, construction, repair, and art. The tape can be made of different materials like paper, cloth, plastic, or rubber. It can be used for temporary or permanent solutions and can also come in different widths, colors and adhesive strength.

Bound refers to something that is fastened together, or constrained by something else. It can also mean that something is restricted by a limit. The requirements of bound depend on the context. For example, a bound book should have a sturdy cover and be securely bound together, a bound rope should be strong enough to support the weight it is intended to hold and be properly fastened, and a bound variable in programming should have a specific data type and should not be able to change.

Overcasted refers to a sewing technique used in tailoring and dressmaking. It is a way to finish the raw edges of a fabric by folding the edge under and then sewing over it, creating a neat and clean finish. The requirements for overcasted are a sewing machine or a needle and thread, and the fabric you want to finish the edges of.

Seamless refers to something that has no seams or breaks, it is smooth and continuous. The term can be used to describe clothing, textures, materials and even technology. In the context of clothing, seamless means that the clothing is made without any stitching or visible seams, giving it a smooth and comfortable fit. In technology, seamless refers to a smooth experience without interruption, for example, a seamless online experience means that there are no delays or interruptions in the process.

Stitched refers to the process of joining two or more pieces of fabric or material together using a needle and thread. It requires a needle, thread, and the material you want to join together. Additionally, a sewing machine can also be used for stitching. The requirements for stitching are a needle, thread, and the material you want to join together. If you use a sewing machine, you will also need electricity and thread for the machine.

Overall style refers to the overall design or aesthetic of an item or collection of items. The requirements for overall style depend on the intended use of the item and the desired look or function. For example, a sleek and modern overall style might be more suitable for a piece of technology, while a traditional overall style might be more suitable for a piece of furniture. Overall style also includes the color, shape, materials, and other design elements that make the item unique. Additionally, overall style can also depend on personal preferences, such as the individual's taste, and the current fashion trends.

EN ISO 17491-3:2008 is a standard that defines the requirements and test methods for protective clothing worn to protect against heat and fire. It specifies the performance requirements for protection against heat and flame, and molten metal. The requirements include resistance to heat and flame, and molten metal. The test results include the level of protection against heat and fire, and the results of visual inspection. It also includes test procedure for clothing and gives guidelines for the selection, care and use of clothing. It gives also the methods for evaluating the heat and fire protection properties of clothing and the performance levels that can be expected. The standard also includes the requirements for labeling and information to be provided by the manufacturers and suppliers of clothing for heat and fire protection.

EN ISO 17491-4:2008 is a standard that sets out the requirements for testing the performance of fire-resistant glazing for use in fire-resistant partitions and doors. The standard specifies the test methods, performance requirements and test results for fire-resistant glazing. This can include tests for fire resistance, integrity and insulation, and the ability to withstand impact and load. The possible test results of this standard would be a pass or fail based on the glazing's ability to meet the performance requirements outlined in the standard.

EN ISO 17491-4:2008/A1:2016 is a standard that sets out the requirements and test methods for the performance of protective clothing against heat and flame. It covers materials, design, construction and performance testing for garments, gloves, foot and head protection. Possible test results include the measurement of heat transmission, flame spread, and burn injury.

EN ISO 22612:2005 is a standard that sets the requirements for the performance and testing of gloves against chemicals. The standard defines the requirements for materials, design, and test methods for gloves worn to protect against chemicals, to ensure that the gloves provide adequate protection. Test results will include information on the materials' resistance to permeation, degradation, and penetration by chemicals. The standard is intended to ensure that gloves provide adequate protection against chemicals in the workplace.

EN ISO 7854:1997 is a standard for testing the flammability of automotive interior materials. It specifies the method for measuring the burning behavior of materials used in car interiors such as seats, dashboard, door panels, and headliners in a vertical position. The performance requirements include how quickly the material burns, how much it continues to burn after the flame is removed, and how much smoke is produced. Possible test results include a flame spread index, after flame index, smoke density, and toxic gas emissions. These test results are used to evaluate the flammability of the materials used in car interiors and to classify it according to the standard's criteria.

Closure style refers to the method by which an object is closed or sealed. The requirements for closure style will depend on the object and the intended use. For example, a zipper closure will be different than a snap closure and a buckle closure will be different than a Velcro closure. Closure style could be chosen based on security, accessibility, durability and ease of use.

Velcro is a type of fastener that consists of two strips of material, one with small hooks and the other with small loops. When pressed together, the hooks and loops interlock, allowing the two pieces to be easily attached and detached. Velcro is used in a variety of applications, from clothing and shoes to home decor and industrial settings. The requirements for velcro may vary depending on the specific use and application.

A button is a small, round or oval-shaped object that is used to fasten things together, such as clothing or bags. It is typically made of plastic, metal or other materials, and it has a hole in the center or a shank on its back to thread a thread or buttonhole on the other side. The requirements for something to be considered a button is that it should be small, round or oval-shaped, have a hole or shank on the back. Additionally, it should be used for fastening things together.

A tie zipper is a type of zipper that is used to seal the opening of a tie, allowing it to be opened and closed. It allows the tie to be worn and taken off without having to untie and re-tie it. The requirements for a tie zipper may vary depending on the type of tie and the frequency of use. They are typically made of plastic or metal, and are easy to use. They can be found in different designs, colors and sizes, but the important thing is that they are able to close and open properly and securely.

Hook and loop is a type of fastener consisting of two layers: a "hook" side, which is a piece covered with tiny loops, and a "loop" side, which is covered with even smaller, stiffer hooks. When the two sides are pressed together, the hooks catch in the loops and hold the pieces together. The requirements for hook and loop fasteners vary depending on the application, but typically it needs to be durable, easy to use and be able to withstand the intended use and environment.

Gender refers to the social and cultural characteristics associated with being male or female, and it can include roles, behaviors, and identities. The requirements for gender can vary depending on the culture and society in which a person lives. In many cultures, gender is determined by biological characteristics such as chromosomes, hormones, and reproductive organs. However, some cultures and societies recognize additional genders or non-binary genders that do not align with the traditional binary of male and female. Furthermore, gender identity is an individual's personal sense of their own gender, which may or may not align with the sex they were assigned at birth. It's important to note that gender is a complex and multifaceted concept, and the requirements and understandings of it can vary greatly across cultures and societies.

Kids are young human beings, typically between the ages of birth and adolescence. The requirements for kids vary depending on their age, stage of development and specific needs, but generally they need to be provided with healthy food, proper shelter, education, love, care and guidance to develop properly. They need to be safe and protected, and they need opportunities to learn, grow and play. It's important to ensure that their basic needs are met and to provide them with a nurturing and supportive environment.

A woman is a female human. The requirements to be a woman are determined by biological characteristics such as the presence of certain reproductive organs and hormones. However, gender identity is a complex and personal experience and it's not limited to the binary of male and female. Some people identify as non-binary or gender nonconforming, which means they don't identify with traditional gender labels.

Unisex refers to things that can be used by people of any gender. The requirements for unisex products can vary depending on the product, but some common features include being suitable for people of any gender and not being specifically designed for one gender.

"Men" is a term used to refer to adult human males. There is no specific definition or requirements for being a "man." It is a biological term used to distinguish males from females and it is based on physical characteristics and reproductive function.

Fit refers to how well a garment or other item conforms to the shape of the person wearing or using it. Requirements for fit depend on the intended use of the item and the desired level of comfort and appearance. For example, a tight fit might be desired for athletic wear to reduce drag and improve performance, while a loose fit might be desired for comfortable, casual clothing. Tailored fit is often used for formal wear or suits, and it is designed to fit the wearer's body shape. Additionally, fit can also depend on personal preferences such as how tight or loose the wearer likes their clothes to fit, as well as factors such as body shape, size and height.

Slim is a web framework that allows you to create web applications using the PHP programming language. It has a simple and lightweight architecture, and is easy to use. The requirements for using Slim are that you must have a web server, PHP, and the Slim library installed on your computer.

Loose refers to something that is not tight or not held firmly in place. It can also mean something that is not fixed or not constrained. The requirements for something to be considered loose will depend on the specific use case, but generally, it should be able to move or change position easily and be able to adjust to different shapes or forms. In some cases, loose can be considered as a negative quality, such as loose screws or bolts, in this case, it should be tightened or fixed to ensure safety and proper function.

PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.

EN ISO 6530:2005 is a standard that sets guidelines for testing the resistance of plastic materials to low-temperature impact. It defines low-temperature impact as the amount of force a plastic can withstand before breaking or showing damage at low temperature. It also sets performance requirements for how much impact a plastic should be able to withstand before showing signs of damage at low temperature.
The test results will include the level of low-temperature impact on the plastic and whether it meets the performance requirements set by the standard.

EN 1149-5:2018 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. This standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material and electrical resistance of the glove. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

EN 1149-5:2008 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. The standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

EN 1149-1:1995 is a European standard that defines the performance requirements for protective clothing with electrostatic properties. The standard specifies that the clothing must have a surface resistance of at least 1x10^5 ohms and a charge decay rate of less than 2 seconds. Test results can include the measurement of surface resistance and charge decay rate.

EN 1149-1:2006 is a European standard that specifies the requirements for electrostatic discharge (ESD) protective clothing. The standard defines the performance requirements for material, design, and testing of ESD clothing. The clothing must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance and charge decay of the clothing material. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

EN 1073-2:2002 is a European standard that defines the requirements for measuring and evaluating the resistance of textiles to penetration of airborne radioactive particles. The standard includes procedures for measuring the ability of textile materials to prevent the penetration of radioactive particles through the fabric. The performance requirements specify the conditions for testing, as well as the evaluation criteria for determining resistance. Possible test results include a rating on a scale of 1-5, with 5 indicating the highest level of resistance to particle penetration.

EN 20811:1992 is a European standard that specifies the performance requirements and test methods for electric motors and generators used in household and similar applications. The standard covers efficiency, power factor, no-load current, temperature rise, and other characteristics of the motors. The test results should show that the motor meets the specified requirements for energy efficiency and safe operation. The standard also includes guidelines for labeling and documentation.

EN 530:2010 is a European standard that sets out the safety requirements and test methods for electrical equipment used in hazardous areas. It defines the requirements for the design and construction of equipment intended for use in potentially explosive atmospheres. The standard specifies the requirements for the protection concepts, protection methods, and the evaluation of the equipment's suitability for use in hazardous areas. The test results include measurements of flame propagation, temperature and explosion-proofness of the equipment. The standard is intended to ensure that equipment used in hazardous areas is safe and will not cause fires or explosions.

The ASATEX® success story began in 1982 with a range of hand protection products. The founder of the GmbH, businessman Carsten Blöcker, demonstrated the right instinct for the market and customers right from the start. The family business quickly developed into a specializing in all matters relating to protective workwear - with a constantly growing product range. Today, ASATEX® is a leading manufacturer of protective clothing and stands for a comprehensive, innovative, and responsible approach to the subject of safety and responsible approach to the subject of "protection at the workplace". Particular attention is paid to the industry's high demands for forward-planning development, timely production and reliable distribution to the specialized trade.

Gloves are designed to safeguard hands from various hazards in industrial environments. They are commonly used to protect against chemicals, abrasions, cuts, and extreme temperatures. Key industries that rely on gloves include manufacturing, construction, healthcare, and food processing. These gloves come in various materials such as latex, nitrile, and leather, each offering specific benefits like chemical resistance, durability, and dexterity. By selecting the appropriate type of glove, businesses can enhance worker safety and maintain compliance with industry standards.

Packaging Supplies, also known as packing materials or shipping supplies, encompass a wide range of products designed to protect, contain, and transport goods efficiently. These supplies include items such as boxes, bubble wrap, packing peanuts, tape, and pallets. Key industries that rely heavily on packaging supplies include manufacturing, logistics, e-commerce, food and beverage, pharmaceuticals, and retail. These materials are essential for ensuring product safety, reducing damage during transit, and optimizing storage and handling processes.

Safety Equipment, also known as Personal Protective Equipment (PPE), encompasses a range of products designed to protect workers from hazards in the workplace. This category includes items such as helmets, gloves, goggles, hearing protection, and respiratory masks. Key industries that rely heavily on safety equipment include construction, manufacturing, oil and gas, mining, and chemical processing. These products are essential for ensuring worker safety and compliance with industry regulations.

Workwear, also known as industrial clothing or protective apparel, encompasses a range of garments designed to ensure safety, durability, and comfort for workers in demanding environments. Commonly used in industries such as construction, manufacturing, oil and gas, and utilities, workwear includes items like coveralls, high-visibility vests, flame-resistant clothing, and safety footwear. These products are essential for protecting workers from hazards, enhancing visibility, and maintaining compliance with safety regulations.

Food Service & Restaurant Supplies encompass a wide range of products essential for the efficient operation of food establishments. This category, also known as commercial kitchen supplies or foodservice equipment, includes items such as cookware, utensils, and storage solutions. Key industries that rely on these supplies include restaurants, catering services, hotels, and institutional food service providers such as schools and hospitals. These products are crucial for maintaining high standards of food safety, hygiene, and operational efficiency.

Cleaning & Hygiene Supplies, also known as janitorial supplies or sanitation products, encompass a wide range of items designed to maintain cleanliness and promote health in various environments. This category includes cleaning chemicals, disinfectants, paper products, hand sanitizers, and cleaning equipment such as mops and vacuum cleaners. Key industries that rely on these supplies include healthcare, manufacturing, food processing, hospitality industry, and education. These products are essential for ensuring a safe and sanitary environment, helping to prevent the spread of contaminants and maintain operational efficiency.

Tools, Tapes & Bolts encompass a wide range of essential items used for construction, maintenance, and repair tasks across various industries. This category includes hand tools, power tools, adhesive tapes, and fasteners such as bolts, screws, and nuts. Commonly referred to as hardware supplies or fastening solutions, these products are indispensable in sectors like manufacturing, construction, automotive, and aerospace. They ensure the structural integrity and functionality of machinery, buildings, and vehicles, making them critical for procurement buyers focused on quality and reliability.

Asatex

Asatex Products

Trusted by Over 12,000 Satisfied Customers

Need help in choosing?