Standards and labels

• EN 13034:2005

  Protective clothing, such as coveralls and aprons, with the EN 13034:2005 rating are tested for limited protection against light spray, liquid aerosols, or low-volume splashes of liquid chemicals. This means the clothing provides a barrier against minor chemical exposure, allowing you time to safely remove it before chemicals penetrate.

  Test results

  Liquid Chemical Protection Type 6

  Provides protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is intended for use in low-risk situations where a full chemical barrier is not required, such as industrial cleaning or maintenance.

• EN 1149-1:1995

  Protective clothing with the EN 1149-1:1995 rating is tested for its ability to dissipate static electricity from its surface. This means the clothing helps prevent hazardous sparks, improving safety in environments where flammable materials are present.

  Test results

  Surface Resistance Tested

  This garment's material is tested to dissipate static electricity, preventing sparks that could ignite flammable gases or dust. It is designed for use in environments with explosion risks, like refineries, to avoid incendiary discharges.

• EN 14126:1999

  Products made with fibre-reinforced plastic composites that have the EN 14126:1999 rating are tested for their ability to withstand compressive forces. This ensures the materials used in these products are strong under pressure, providing durability and reliability for consumers.

  Reach out to ask about the standard test results

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.