Fristads Flame Retardant Flamestat High Vis Winter Jacket Class 3 4185 ATHS

Standards and labels

• EN 15797

  Reach out to ask about the standard test results

• EN IEC 61482-1-2:2018

  EN IEC 61482-1-2:2018 is a European standard that specifies the safety requirements and test methods for clothing that is worn to protect the wearer from thermal hazards such as heat and fire. The standard lays out the minimum safety requirements for the design, construction and performance of the clothing, as well as the test methods for measuring its effectiveness in protecting the wearer from thermal hazards. Test results may include information on the clothing's thermal protection performance, flammability and other safety features. This standard is intended for use in industrial environments where the risk of thermal hazards is present, such as in welding, metal cutting and other operations that generate heat or fire. This standard applies to flame-resistant clothing for thermal hazard protection, and it includes the test methods to determine the thermal protection performance of materials and clothing.

  Test results

  Low-voltage Circuit Arc APC 1

  The standard EN IEC 61482-1-2:2018 outlines methods for testing the protection level of materials and garments against the thermal hazards of electrical arcs. Specifically, the APC (Arc Protection Class) 1 rating indicates a specific performance category under this standard, which reflects the minimum level of protection offered by the material or clothing against the thermal effects of an electric arc. The test method used involves a directed and constrained arc, commonly known as the 'Box test'. In this method, the sample material or garment is exposed to a defined electric arc within a controlled box setup to simulate realistic arc flash conditions. The parameters like arc current, duration, and the geometry of the setup are defined strictly to ensure reproducibility and comparability of results. The APC rating derived from this test provides essential data for industries, where workers are exposed to electrical hazards, enabling the selection of appropriate safety clothing that meets regulated safety standards to protect against potential thermal risks posed by electrical arcs. This testing not only assures compliance with safety regulations but also significantly contributes to the enhancement of occupational safety in environments with electrical arc hazards.

• EN 342:2017

  EN 342:2017 is a European standard that sets out safety requirements for personal protective equipment (PPE) to be used for protection against cold. It is an updated version of the original standard EN 342:2004 and it includes new and improved requirements for the PPE. The standard defines the general requirements for PPE, including design and construction, marking, instructions for use, and packaging. Performance requirements include things like thermal insulation and protection against water penetration, breathability, and test results may include measurements of these properties. The standard also specifies the testing methods that should be used to test PPE, such as measuring the thermal resistance of the materials and the resistance of the garment to water penetration and breathability.

  Reach out to ask about the standard test results

• EN IEC 61482-1-1:2019

  EN IEC 61482-1-1:2019 is a European standard that specifies the requirements and test methods for flame-resistant clothing for electric arc protection. It lays out minimum performance requirements for the design, construction, and performance of flame-resistant clothing, as well as test methods to measure its effectiveness in protecting the wearer from an electric arc. Test results may include information on the clothing's arc protection performance, thermal protection, and flammability. This standard is for flame-resistant clothing that is intended for use in electrical environments where the risk of an electric arc is present. It covers the general requirements for flame-resistant clothing for electric arc protection and test methods for the determination of the arc protection performance of materials and clothing.

  Reach out to ask about the standard test results

• EN 13034:2005

  EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.

  Test results

  Liquid Chemical Protection Type 6 PB

  EN 13034:2005 specifies the performance requirements for protective clothing that offers limited protection against liquid chemicals, identified specifically as Type 6 PB (partial body protection). The 'Type 6 PB' designation implies that the protective garment has been tested and confirmed to provide effective defense against light spray and minor splashes of liquid chemicals, but only for parts of the body such as aprons, sleeves, or boots rather than full body suits. This standard tests the fabric's barrier effectiveness by applying a defined volume of liquid to the garment and assessing any penetration or repellence under controlled laboratory conditions. Garments achieving Type 6 PB classification are crucial for tasks in industries like chemical processing or handling where full body coverage is unnecessary, thereby offering flexibility and targeted protection, reducing the risk of chemical exposure to critical areas of the body.

• EN 1149-5:2018

  EN 1149-5:2018 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. This standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material and electrical resistance of the glove. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

  Test results

  Material Performance Tested

  The standard EN 1149-5:2018 pertains to the performance of materials with regard to their electrostatic properties, specifically testing for the charge decay characteristics. The test result Tested signifies that the material has been evaluated according to the specified methods and met the defined criteria for electrostatic properties under this standard. To determine this result, a set of specific test methods is deployed to assess the decay of electrostatic charge from the surface of the material. The test involves subjecting the material to an electrostatic charge and then measuring the rate and manner in which this charge dissipates. This ensures that materials such as those used in protective clothing are safe for use in environments where electrostatic discharge could pose a hazard, such as in certain industrial or medical settings where flammable substances are present. For procurement professionals, understanding that a product has been tested and meets EN 1149-5:2018 standards is crucial as it ensures the product's safety and suitability in environments susceptible to electrostatic risks.

• EN 11612:2015

  EN 11612:2015 is a European standard that specifies the requirements for protective clothing against heat and flame. This standard defines performance requirements for material, design, and testing of clothing that protects the wearer from heat and flames. Testing includes measuring the clothing's resistance to heat and flame, as well as its ability to self-extinguish. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

  Reach out to ask about the standard test results

• EN ISO 20471:2013

  EN ISO 20471:2013 is a standard for high visibility clothing worn in certain work environments. It sets guidelines for clothing to make sure people can see the person wearing it well in low light conditions. Test results are used to make sure the clothing meets these rules. The tests include checking the amount of reflective material on the clothing and how well it can be seen from different angles.

  Test results

  Reflective Strip Area Grade 3

  Reflective Strip Area Grade 2

• EN 11611:2015

  EN 11611:2015 is a European standard that specifies the requirements for protective clothing for use in welding and allied processes. This standard defines performance requirements for material, design, and testing of clothing that protects the wearer from heat and flames. Testing includes measuring the clothing's resistance to heat and flame, as well as its ability to self-extinguish. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

  Test results

  Welding Protection Class 1

  The standard EN 11611:2015 establishes criteria for protective clothing used during welding and allied processes, specifically regarding safety to reduce the risk of harm from sparks, spatter, and other hazards associated with welding. In this context, a Class 1 test result indicates the clothing provides basic protection suitable for less hazardous welding techniques where lower levels of spatter and radiant heat are anticipated. The test for this classification involves subjecting the fabric to controlled ignition and monitoring its resistance to flame spread, heat transfer, and the formation of holes. The fabric material must neither ignite nor continue to burn after the source of ignition is removed. In practical terms, products achieving Class 1 under EN 11611:2015 are suitable for types of welding that produce lower spatter and radiant heat, making them ideal for less intense welding operations but not for those that involve higher risks that might require more robust protective gear categorized in higher classes.

• EN 13688:2013/A1:2021

  EN 13688:2013/A1:2021 is an amendment to the European standard EN 13688:2013 that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. The amendment updates the standard to include new test methods and performance requirements. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.