Standards and labels

• EN 1073-2:2002

  Protective clothing with the EN 1073-2:2002 rating are tested for protection against particulate radioactive contamination. This ensures the clothing effectively minimizes the inward leakage of hazardous radioactive particles to keep you safe.

  Reach out to ask about the standard test results

• EN 14126:2003

  Protective clothing and coveralls with the EN 14126:2003 rating are tested for resistance against penetration by infective agents like bacteria, viruses, and contaminated liquids and aerosols. This means the material provides a reliable barrier, helping to protect you from biological hazards and prevent the spread of germs.

  Reach out to ask about the standard test results

• EN 1149-5:2018

  Protective clothing with the EN 1149-5:2018 rating is tested for its ability to dissipate electrostatic charges. This prevents sparks that could ignite explosive atmospheres, keeping the wearer safe in hazardous environments.

  Test results

  Material Performance Tested

  This garment's material is designed to dissipate static electricity, preventing sparks that could ignite flammable or explosive atmospheres. It is intended for use as part of a total earthed system in hazardous environments like petrochemical refineries.

• EN 13034:2005+A1:2009

  Protective clothing with the EN 13034:2005+A1:2009 rating is tested for limited protection against liquid chemicals, such as light spray or splashes. This ensures the garment resists chemical penetration and repellency, allowing you to work safely with low-risk chemical exposure and remove it quickly if contaminated.

  Test results

  Liquid Chemical Protection Type 6

  This garment offers protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is designed for low-risk situations where a full chemical barrier is not needed and you can act if contaminated.

• EN ISO 13982-1:2004/A1:2010

  Chemical protective clothing, such as coveralls and suits, with the EN ISO 13982-1:2004/A1:2010 rating are tested for resistance to penetration by airborne solid particles and inward leakage. This ensures the clothing provides full-body protection against hazardous dusts and dry particulates, keeping you safe in environments where such particles are present.

  Test results

  Airborne Solid Particle Protection Type 5

  Provides full-body protection against hazardous airborne solid particles like dust and fibres. This suit is ideal for tasks such as asbestos removal, pharmaceutical manufacturing, or any work in environments with fine, dry particulates.

• EN 14605:2005+A1:2009

  Protective clothing like coveralls, jackets, and aprons with the EN 14605:2005+A1:2009 rating are tested for their ability to prevent liquid chemicals from penetrating the fabric and seams under spray or jet conditions. This ensures reliable protection against hazardous chemical splashes and contact, keeping the user safe in various work environments.

  Reach out to ask about the standard test results

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.