Läderhandske 6 par
6 par · 8,20 €/par
Färg: White/Black
förpackning · 6 par
1 arbetsdag
30 dagars fri returrätt
Denna monteringshandske, designad för användning året runt, är tillverkad av slitstarkt getnarv och flexibel nylon, vilket garanterar utmärkt fingertoppskänsla. Handsken har ett tunt fleecefoder som håller händerna varma i svala förhållanden utan att kompromissa med arbetsprecisionen. Förstärkta fingertoppar och pekfinger ökar handskens livslängd och skyddar handen mot mekanisk påverkan.
Egenskaper
- Förstärkning på pekfinger och fingertoppar
- Smidig och bekväm passform
- Bra fingertoppskänsla för precisionskrävande uppgifter
- Skyddar mot skavsår, blåsor och rivsår
- Resår vid handleden för bättre passform
Tekniska specifikationer
- Material i innerhand: Getnarv
- Material i ovanhand: Nylon
- Fodermaterial: Fleece (Vinterfoder)
- Materialegenskaper, utsida: Läder, Polyester
- Materialegenskaper, insida: Polyester
- Längd: 225-255 mm
Rekommenderade användningsområden Monteringsarbeten, maskinoperatör, byggarbeten, snickeriarbeten, verkstadsarbeten, transport- och lagerarbeten, flygplatsarbeten, reparationsarbeten, logistik
Standarder
- EN ISO 21420:2020
- EN 388:2016+A1:2018 (2111X)
- EN 511:2006 (11X)
- ANSI/ISEA 105-2016 Abrasion 3
- Cat. II
- TP TC 019:2011
- Färg · Svart, Vit, Gul
- Stil för manschett · Elastisk, Öppen
- Handske stil · Helt finger, Universal
- Material för fodret · Fleece
- Material · Fleece, Läder, Syntetisk läder
Standarder
EN 388:2016
Gloves and arm protectors with the EN 388 rating are tested for protection against mechanical risks like abrasion, cuts, tears, punctures, and sometimes impact. This helps you choose protective gear with the right level of durability and safety for tasks that involve these hazards.
Testresultat
- Abrasion Resistance Level 2
Withstands moderate rubbing and friction, offering good protection for tasks involving handling rough materials.
- Cut Resistance, Coup Test Level 1
Provides minimal protection against cuts from a rotating blade under constant, low force.
- Cut Resistance, ISO 13997 Level X
Provides the highest level of cut protection, passing a specialized test for materials that dull blades.
- Puncture Resistance Level 1
Provides basic protection against punctures from blunt objects like splinters, not sharp points like needles.
- Tear Resistance Level 2
Offers moderate resistance against snagging or catching on rough objects, preventing small rips from growing.
- Abrasion Resistance Level 2
EN 420:2003+A1:2009
Gloves and other hand protection with the EN 420 rating are tested for general safety, comfort, and harmlessness of materials. This ensures the product fits well, allows for good hand movement, and won't cause irritation or allergic reactions during use.
EN 511:2006
Gloves with the EN 511 rating are tested for protection against convective cold, contact cold, and water penetration. This ensures your hands stay warm and dry in cold environments, helping you choose the right gloves for working or being outdoors.
Testresultat
- Cold Contact Level 1
Provides light thermal insulation when directly handling cold objects. This offers basic protection for short or intermittent contact with cold surfaces, suitable for general tasks in cool conditions rather than prolonged exposure to extreme cold.
- Convective Cold Level 1
This glove provides light thermal insulation against the penetrating chill from cold air and wind. It is suitable for use in cool conditions, offering a basic level of protection to keep your hands warm.
- Water Tightness Level X
This product was not tested for water penetration resistance. It may not protect your hands from getting wet and could lose its insulating properties in damp or snowy conditions, so it is best for use in dry cold environments.
- Cold Contact Level 1
Märkningar
PPE Kategori 2
PPE står för "personlig skyddsutrustning". PPE kategori 2 avser utrustning som är mer komplex och har en högre risknivå. Exempel på PPE kategori 2 är säkerhetshjälmar, hörselskydd och fallskyddsutrustning. I Europa måste PPE kategori 2 uppfylla vissa säkerhetsnormer som fastställts av Europeiska unionen, vilket innebär att den måste vara utformad och tillverkad för att skydda användaren utan att orsaka skada. Företag som tillverkar eller säljer personlig skyddsutrustning måste bevisa att den uppfyller dessa standarder. De måste också ha ett system för kvalitetsstyrning och måste regelbundet kontrolleras av ett anmält organ.
Vad andra säger
- White/Black✓ Onlineköpare
Excellent gloves, durable enough for tough jobs
- White/Black✓ Onlineköpare
Got myself a pair of these gloves, and they're really good – warm, tough, and comfy. However, I ordered a size 9, and they fit a bit snugly. If you've got bigger hands, I'd suggest going for a size 10 or even 11.
Du kanske också gillar


Nitrilhandskar
GREEN BARRIER GRIP Kemikalieskyddshandske
CUT5 skärskyddshandske
CANDY WAVE Engångshandskar i nitril


Svarta nitrilhandskar
BIG BLACK WAVE Nitrilengångshandske
BIG BLUE WAVE Nitrilengångshandskar
Syntethandske INFINITY 6 par
Chemstar Nitrilhandskar
SPLIT MASTER Nötspalthandskar
APOLLO Nötnarvshandske 12 par
Läderhandske 6 par
30 dagars fri returrätt





































