ActivArmr 43-216

• Färg · Gul
• Stil för manschett · Öppen
• Handske stil · Skuren sydd, Extra lång, Helt finger, Universal
• Material för fodret · Bomull, Koläder, Kospalt, Kevlar®
• Material · Bomull, Koläder, Kospalt, Kevlar®

Standarder

• EN 12477:2001/A1:2005

  Welding gloves with the EN 12477 rating are tested for protection against molten metal splashes, flames, various types of heat, and mechanical risks. This ensures your hands and wrists are safely protected during welding, allowing you to choose gloves suited for either high protection or greater dexterity.

• EN 388:2016

  Gloves and arm protectors with the EN 388 rating are tested for protection against mechanical risks like abrasion, cuts, tears, punctures, and sometimes impact. This helps you choose protective gear with the right level of durability and safety for tasks that involve these hazards.

  Testresultat

  • Abrasion Resistance Level 3

    Provides good resistance against scraping, scratching, and rubbing on rough or abrasive surfaces.

  • Cut Resistance, Coup Test Level 2

    Offers low-level protection against cuts from objects like box cutters or sharp edges during general tasks.

  • Cut Resistance, ISO 13997 Level B

    Offers low cut protection for general work, such as packaging and light assembly.

  • Puncture Resistance Level 3

    Withstands strong pressure from sharp objects like nails or thick splinters.

  • Tear Resistance Level 4

    Offers the highest level of protection against tearing, withstanding a strong force before ripping.

• EN 407:2004

  Gloves and other hand protection with the EN 407 rating are tested for protection against heat and/or fire, including flame, contact heat, and molten metal splashes. This helps you choose products that offer a specific level of defense against various thermal hazards, ensuring your hands stay safe.

  Testresultat

  • Burning Behaviour Level 4

    Provides the highest level of protection against catching fire when exposed to a naked flame. After the flame is removed, the material will stop burning within 2 seconds and stop glowing within 5 seconds.

  • Heat Contact Level 1

    Provides protection when briefly touching hot objects. Certified for contact with surfaces up to 100°C for at least 15 seconds, offering short-term protection against burns from items like hot cookware or machinery parts.

  • Heat Convection Level X

    This product was not tested for protection against convective heat, which is the transfer of heat through moving air, such as from a flame. Therefore, it has no claimed performance level for this specific thermal risk.

  • Metal Splash Resistance Level 4

    Provides the highest level of protection against large splashes of molten metal, tested to resist amounts greater than 200 grams. This makes it essential for high-risk industrial jobs like foundry work and heavy welding.

  • Molten Metal Resistance Level X

    This product has not been tested for resistance against splashes of molten metal. It provides no claimed protection and should not be used for welding, foundry work, or other tasks with molten metal risks.

  • Radiant Heat Level 3

    Provides strong protection by delaying the transfer of intense, radiating heat for an extended period. Ideal for working safely near significant heat sources, such as furnaces or forges, without direct contact with hot surfaces.

• EN ISO 21420:2020

  Protective gloves, arm protectors, mittens, and pot holders with the EN ISO 21420 rating are tested for general requirements like design, comfort, sizing, and chemical innocuousness (ensuring no harmful substances are present). This means the product is safe and comfortable to wear, fits properly, and won't cause skin irritation or other harm during use.

  Testresultat

  • General Requirements Guide

    Ensures protective gloves meet general requirements for design, comfort, and safety. It guarantees the materials won't harm you, are sized correctly for better dexterity, and are constructed to be easily put on and taken off.

Märkningar

• PPE Kategori 3

  PPE står för "personlig skyddsutrustning". PPE kategori III avser utrustning som är komplex och ger högsta skyddsnivå, t.ex. andningsskydd med motor, SCBA och helkroppsdräkter. I Europa måste PPE kategori III uppfylla vissa säkerhetsnormer som fastställts av Europeiska unionen, vilket innebär att den måste vara utformad och tillverkad för att skydda användaren utan att orsaka skada. Företag som tillverkar eller säljer personlig skyddsutrustning måste bevisa att den uppfyller dessa standarder. De måste också ha ett kvalitetsstyrningssystem, måste granskas regelbundet av ett anmält organ och måste ha en teknisk dokumentation.

• Ecovadis

  Ecovadis är ett klassificerings- och certifieringssystem som används i Europa för att utvärdera och erkänna företagens hållbarhetsprestanda. Det är inriktat på leveranskedjan och utvärderar företag utifrån miljömässiga, sociala och etiska kriterier, t.ex. miljöskydd, arbetsmetoder och rättvisa affärsmetoder. Kraven för att få en Ecovadis-certifiering beror på den specifika företagskategorin och branschen, men inkluderar vanligtvis att tillhandahålla information om företagets hållbarhetsrutiner, policyer och resultat samt att genomgå en bedömning av en oberoende revisor.

• REACH

  REACH stands for "Registration, Evaluation, Authorisation and Restriction of Chemicals" it is a regulation of the European Union that governs the registration, evaluation, authorization, and restriction of chemicals. The REACH regulation aims to ensure that the chemicals used in Europe are safe for human health and the environment. The regulation applies to all chemical substances, whether they are used in industrial processes or in everyday products such as cleaning products, paints, and cosmetics.