Standards and labels

• EN 13758-2:2003+A1:2006

  EN 13758-2:2003+A1:2006 is an amendment to the European standard EN 13758-2:2003. This amendment sets additional requirements for testing the performance of air filters used in ventilation systems. The standard defines test methods for measuring the filter's ability to remove gaseous pollutants such as odors and volatile organic compounds (VOCs) from the air. It also specifies test methods for measuring the filter's airflow resistance and filter leakage. The amendment also includes additional test methods for measuring the filter's ability to remove microorganisms and radioactive particles. Test results should show the filter's efficiency in removing gaseous pollutants, microorganisms and radioactive particles, as well as its airflow resistance and filter leakage. The standard also specifies labeling and documentation requirements for air filters that meet its performance requirements.

  Test results

  UVA & UVB Radiation UPF #,##

  The EN 13758-2:2003+A1:2006 standard outlines the criteria for assessing the Ultraviolet Protection Factor (UPF) of textiles intended to provide protection against ultraviolet (UV) solar radiation. The result indicates the level of ultraviolet protection afforded by the fabric. Specifically, this number represents how much UV radiation (both UVA and UVB) the textile can block. A higher UPF number equates to better UV protection, where a rating of 50 means that the fabric will allow only 1/50th of the sun's UV rays to pass through.The test method used to determine this result involves exposing the textile to a simulated solar spectrum and measuring the amount of UV radiation that penetrates the fabric. This standard ensures that the fabric's weave, thickness, color, and stretch, among other factors, are considered during testing. The results from this testing are crucial for manufacturers of sun-protective clothing, as they provide a measurable and standardized level of UV protection to be communicated to consumers. Products meeting a high UPF rating are particularly significant for consumers who require superior protection from UV radiation due to health concerns or environmental exposure considerations.

• EN ISO 20471:2013

  Test results

  Reflective Strip Area Grade 3

  The EN ISO 20471:2013 standard specifies the requirements for high-visibility clothing, with a specific focus on the reflective strip area, a crucial element for ensuring visibility in low-light conditions. A test result achieving Grade 3 indicates the highest level of reflectivity performance in this standard, ensuring optimal visibility and safety for the wearer in various lighting conditions. In grade 3 products reflective tape is 0.20 m2 and fluorescent material is 0.8 m2.The test methodology involves assessing the amount and quality of retroreflective material on garments. This is quantified under precise conditions to ensure that the reflective strips meet stringent visibility requirements even from significant distances or in poor lighting conditions. Garments that meet Grade 3 requirements are suitable for use in high-risk environments where being seen by others is crucial for safety, such as road construction sites, airport ground operations, and other scenarios with high vehicular traffic or complex visual backgrounds.

• EN 13688:2013

  EN 13688:2013 is a European standard that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.