Lightweight and adjustable Y-shaped chest harness compatible with Beal Professional HERO SIT and SHAOLIN sit harnesses. Comfortable and easy to fit, it ensures the user remains in an upright position during a fall.

Strong points:
- Lightweight
- Adjustments are made using a front buckle at shoulder height and a dorsal rear buckle
- The shoulder strap slides through the sternal D-ring which provides a large range of movement and ensures ease of fitting
- A slight narrowing of the shoulder straps prevents chafing around the neck
- Multiple attachment points for the elasticated chest ascender retainer
- Two reinforced loops per shoulder strap can be used to attach scaffolding hooks
Uses:
Work at height, industry, rescue
CE EN 361.

Käyttövalmiiksi kasattu poikkeuksellisen kevyt putoamissuojainpakkaus työskentelyyn putoamisvaarallisilla alueilla. Sisältää vetoketjullisessa varustepussissa seuraavat Beal tuotteet: 
 
- Styx Rescue kokovaljaat S-XL: Värikoodattu ja varustettu kolmiokappaleella pukemisen helpottamiseksi. Automaattisesti lukkiutuvat helppokäyttöiset säätösoljet. Kiinnityspisteet rinnassa ja selässä. 
- Air-Kit säädettävä liitosköysi, sisältäen valmiiksi asennettuina: 
> 1 kpl Industrie 11 mm - ydinköysi oranssi 10 m 
> 1 kpl Monitor - köydessä liikkuva, putoamisen pysäyttävä köysitarrain 
> 1 kpl Mobile Lanyard - nykäyksenvaimennin, jossa 20 cm ja 40 cm asetusvaihtoehto käyttöpituudelle. Käytetään säätölaitteen ja valjaiden välissä 
> 2 kpl O’Light 3-Matic automaattilukitteinen ovaali alumiinisulkurengas, joilla nykäyksenvaimentimen toinen pää liitetään köysitarraimeen ja toinen pää valjaan A-merkittyyn rinta- tai selkäkiinnityspisteeseen 
> 1 kpl Be Lock 3-Matic automaattilukitteinen suuren avauman sulkurengas, jolla köyden pää liitetään ankkuripisteeseen 
 
Köysi on notkea ja helposti käsiteltävä kaikkina vuodenaikoina. Yläpäässä tehdasommeltu päätöslenkki, jonka suojus suojaa köyttä, pitää lukkosulkurenkaan oikeassa asennossa ja helpottaa käsittelyä. Suojus on irrotettava, joten ompeleiden tarkastaminen on helppoa. Tehdasommeltu päätöslenkki lisää köyden murtolujuutta verrattuna solmulla tehtävään päätökseen. 
Köysitarrain seuraa käyttäjää molempiin suuntiin köydessä ja putoamistilanteessa nykäyksenvaimennin rajoittaa kehoon ja ankkuripisteeseen kohdistuvat voimat alle 6 kN:iin.  
Lukkosulkurenkaiden sileät Key Lock portit tekevät sulkurenkaiden käytöstä tehokasta ja miellyttävää. 
Valjaiden Sivuilla yhteensä 4 pientä kulutussuojattua ja helppokäyttöisiksi jäykistettyä työkalukiinnitintä, joihin voidaan kiinnittää suoraan esim. Beal Air-Leash työkaluhihnat (tuotekoodi BAL) tai Beal Tool Bucket työkalupussit (tuotekoodi BSAC.TB). Paino: vain 770 g. Onesize fits all: Soveltuu käyttäjille, joiden pituus 155 - 200 cm. Reiden ympärysmitta: 40-80 cm. Vyötärön ympärysmitta: 80-140 cm 
 
Sertifioinnit: Valjaat CE EN 361. Säädettävä liitosköysi: CE EN 353-2 mukainen putoamisen pysäyttävä järjestelmä, sekä EN 12841 tyyppi A mukainen säätököysi. Lukkosulkurenkaat: CE EN 362, EN 12275. UIAA. 
 
Sarjanumeroitu sekä QR-koodattu, jotta jäljitettävyys ja varusteiden hallinta olisi helppoa. Maksimielinikä: Metallituotteet: Rajoittamaton. Köysi ja nykäyksenvaimennin: 15 vuotta (5 vuotta varastointia + 10 vuotta käyttöä). Materiaali- ja valmistusvirhetakuu 3 vuotta. 
 
Pakkauksen mitat: 60 cm x 25 cm x 13 cm. 
 
Jos kiinnittät köyden selkäkiinnityspisteeseen, tarvitset lisäksi yhden sulkurenkaan valjaan sulkemiseen esim. O’Light 3-Matic (ei sis. pakkaukseen)

Sewn webbing sling loop for professional use in work at height environments and for sport climbing. Certified to CE EN566 and EN795 class B, EN354 standards and UIAA requirements. Indicator showing the year of manyfacture. Breaking strength 22 kN. Material: Polyester. Max lifetime: 15 years (=5 years of storage + 10 years of use).

Lightweight automatically locking carabiner made of aluminium. 3-Matic triple-action gate opening. Designed for work at height and sport climbing. Oval shape that allows optimal loading of devices with a wide section, such as pulleys, rope clamps and mobile fall arresters. Smooth Keylock system facilitates handling by avoiding involuntary snagging of the carabiner. Gate opening 17 mm. Major axis breaking strength 22 kN. Weight 82 g. Certifications: CE EN 362, EN12275, UIAA. Individual serial number. Max lifetime: Unlimited.

Connecting strap with two length options. Designed for use between the fall arresting Beal Monitor rope lanyard and the full body harness. The user can choose a short 20 cm position or a long 40 cm position depending on the application. Allows working away from the safety rope and keeping the rope away from e.g. molten metal splash and heat. The short position minimises the fall distance and keeps the rope close to the user, making it suitable for working while hanging on the rope, for example. The long position allows more freedom of movement and allows the rope to be positioned further away, suitable for work on roofs and in situations where the rope needs to be kept away from external threats. 

Supplied with two Beal Pinch protectors at the ends of the strap to help keep the lock-lock rings in a good position and protect the fibres from wear. Each individual is serial numbered. Breaking strength 2200 daN (kg). Weight 64 g. CE EN354. 15 years (5 years storage + 10 years use). Material and manufacturing defects guaranteed for 3 years.Compatibility:
Beal Monitor rope reserve: BMFAM

Workstation belt for efficient work positioning. This adjustable belt makes it possible to adjust positioning rings to all morphologies or all situations by a simple sliding. The quick-release buckle offers a simple opening / closing. The belt is compatible with the Beal Styx Fast harness to form a EN358 work positioning combination. Designed for industry, roofing, scaffolding, craftsmen, rescue, fireman, platform, pylon, telecoms etc.

Features:
- Two adjustable aluminum side rings
- A wide foamed belt for maximum comfort
- A quick buckle at the belt
- A large organiser gear loop 
- Traceability: Identification area with QR code to create your own identification
- 6 mini organiser gear loops to attach Beal Workstation accessories
- Certified according to CE EN358

Max lifetime: 5 years of storage + 10 year in use = 15 years.

Rope work, work positioning, fall protection, full helmet. Quick release footstraps for easy donning and integrated Beal Hold Up rope lanyard for rope ascent. Maximum lifetime 5 years storage + 10 years use = 15 years.

A versatile fall arrest and work positioning harness. Designed for multi-purpose professional use. Certified according to CE EN361, EN358 and EN813.

Features:
- X shaped shoulder straps increase comfort and ensure excellent load distribution
- The semi-rigid leg loops and waist belt provides optimal pressure distribution where the body is in contact with the harness
- The padded shoulder straps are held apart to minimise neck chafing
 The waist belt, leg loops and shoulder straps are lined with breathable foam to improve comfort and to reduce perspiration
- The waist belt’s two lateral attachment loops can be folded back to minimise hindrance
- The dorsal attachment point is made from steel
 Two opening quick release buckles (one per leg loop) enable the harness to be easily fitted even with cumbersome footwear
- Two lightweight loops on the shoulder straps allow the attachment of accessories or storage of scaffolding hooks
- 4 large, pre-shaped gear loops are positioned around the waist belt to easily accommodate all equipment
- 6 mini gear loops can be used to attach Beal AIR-LEASH or SUPER LEASH extendable tool holders or 3 tool pouches (TOOLBUCKET, GLASS-BUCKET or LONG TOOL BUCKET)
- The rear of the waist belt contains an area to allow personal marking such as your company’s name, as well as a QR code which allows a personal identifier to be generated (your name and unique ID)
- Available in 3 sizes:
S: For 155-175 users. Weight 2065 g.
M-L For 170-165 users. Weight 2125 g.
XL: For 180-210 users. Weight 2230 g.
Max lifetime: 5 years of storage + 10 year in use = 15 years.

Adjustable work positioning lanyard with auto locking hook connector and 12.5 mm semi-static rope for work at height. Ergonomic, captive rope clamp for easy adjustment. Sewn termination with reinforced eye to protect the rope. Removable cover allows the inspection of termination stitches. Tubular protection webbing for the rope. Marked with a unique serial number and labelled to accommodate personal markings as well as a QR code to assist traceability. Hook gate opening 22 mm. CE EN358. Available in 3 lengths: 2 m (710 g), 3 m (820 g) and 5 m (1020 g). Max lifetime: 15 years (=5 years of storage + 10 years of use).

Adjustable, dynamic, double-branch rope for efficient and safe progress. Designed for high-altitude work and rescue applications. Made of highly abrasion-resistant, thick and flexible 12,2 mm diameter rope. Limits the jerking forces on the user significantly more than a traditional static lanyard. Attaches to the front attachment point of the harness hip belt. By tying 8 knots, the user can determine the length of the branches and make the rope asymmetrical to suit his needs. For example, a Beal Hands Up ascent handle can be attached to the long branch for ascending along the rope. The short branch is used for anchoring when passing intermediate belay points. The Y-shape makes moving long lifelines efficient.

The ends of both branches of the rope have a sewn closure and a guard to protect the stitching from wear. Beal Pinch helps to keep the lock rings attached to the ends of the branches in the correct position and makes handling easier. Length 160 cm. Weight 120 g. CE EN 354. Breaking strength 22 kN when used as a two-branch rope, 25 kN when used as a single-branch rope. Maximum service life: 15 years (5 years storage + 10 years use). 3 years guarantee against defects in material and workmanship.
You will also need lock rings to connect the Dynapro to the harness (if the Dynapro is not tied directly to the front attachment point of the harness) and branches to the anchor points or lifting handle.

A small transparent tool pouch for organizing bolts, screws and other small items whilst leaving contents easily visible.

The Clic Clac system can be used to quickly close the bag and prevents loss of contents during transport. 2 external mini karabiners are fitted to connect the Glass Bucket to the Genius Bucket Plus or Tool Belt. Volume 1,8 L. Weight 115 g. Height 14 cm. Width 16 cm.

CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

EN 361:2002 is a European standard that tells manufacturers how to make full body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the full body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the full body harnesses.

EN 353-2:1992 is a European standard that describes the requirements and test methods for fall arresters, including energy absorbers and lanyards, used for personal fall protection. It sets guidelines for how well the fall arresters should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the fall arresters.

EN 353-2:2002 is a European standard that tells manufacturers how to make fall arresters, including energy absorbers and lanyards, that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested and the information that should be provided with the product. The test results will show the strength and safety of the fall arresters. It also states that the manufacturers should provide information about the product performance and safety instructions with the fall arresters.

EN 12841:2006 is a European standard that sets out the safety requirements and test methods for portable fire extinguishers. The standard defines the safety requirements for the design, construction, and performance of portable fire extinguishers, and provides test methods to ensure these requirements are met. Possible test results include the fire extinguisher's ability to put out a fire, the amount of extinguishing agent it can hold and the discharge rate. Additionally, the test results include the durability of the fire extinguisher in regards to corrosion and leakage.

EN 362:1992 is a European standard that tells manufacturers how to make connectors used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested and the information that should be provided with the product. The test results will show the strength and safety of the connectors. It also states that the manufacturers should provide information about the product performance and safety instructions with the connectors.

EN 795:1996/A1:2000 is an amendment to the European standard EN 795:1996 that sets out the requirements for the design and testing of fall arrest systems. It covers the performance requirements for safety and reliability of fall arrest systems. To meet this standard, a fall arrest system must be able to stop a person from falling and protect them from injury. Possible test results include measurements of the system's strength and stability, as well as an evaluation of its ability to resist wear and tear. The standard also includes additional requirements for fall arrest systems such as the use of anchors, horizontal lifelines, and safety devices. It also includes requirements for the proper use, maintenance and marking of fall arrest systems.

EN 795:2012 is an European standard that sets out the requirements for the design and testing of fall protection equipment and fall protection devices. It covers the performance requirements for safety, reliability and durability of fall protection devices and equipments. To meet this standard, a fall protection device or equipment must be able to stop a person from falling and protect them from injury. Possible test results include measurements of the device's or equipment's strength and stability, as well as an evaluation of its ability to resist wear and tear, environmental factors and its ability to be used in different scenarios. The standard also includes requirements for the proper use, maintenance, marking and identification of fall protection devices and equipments.

EN 795:1996 is a European standard that sets out the requirements for the design and testing of fall arrest systems. It covers the performance requirements for safety and reliability of fall arrest systems. To meet this standard, a fall arrest system must be able to stop a person from falling and protect them from injury. Possible test results include measurements of the system's strength and stability, as well as an evaluation of its ability to resist wear and tear. The standard also includes requirements for the proper use and maintenance of the fall arrest systems.

EN 354:2010 is a European standard that tells manufacturers how to make lanyards that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the lanyards. It also states that the manufacturers should provide information about the product performance and safety instructions with the lanyards. This standard has been updated from previous versions to include new safety requirements and test methods.

EN 354:1992 is a European standard that describes the requirements and test methods for lanyards used for personal fall protection. It sets guidelines for how well the lanyards should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the lanyards.

EN 354:2002 is a European standard that tells manufacturers how to make lanyards that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested and the information that should be provided with the product. The test results will show the strength and safety of the lanyards. It also states that the manufacturers should provide information about the product performance and safety instructions with the lanyards.

EN 358:1992 is a European standard that describes the requirements and test methods for body belts and body harnesses used for personal fall protection. It sets guidelines for how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses.

EN 358:2018 is a European standard that tells manufacturers how to make body belts and body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the body belts and body harnesses. This standard has been updated from previous versions to include new safety requirements and test methods.

EN 358:1999 is a European standard that tells manufacturers how to make body belts and body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the body belts and body harnesses.

EN 813:2008 is a European standard that sets out the requirements for helmet for use in alpine skiing and snowboarding. The standard covers the performance requirements for safety, impact resistance, penetration resistance and the ergonomic requirements of the helmet. To meet this standard, a alpine ski or snowboard helmet must be able to protect the head from impact and penetration, and fit comfortably on the head. Possible test results include measurements of the helmet's impact resistance, penetration resistance and fit, as well as an evaluation of its ability to resist wear and tear and environmental factors. The standard also includes requirements for the proper use, maintenance, marking and identification of alpine ski or snowboard helmets.

Fall protectors, also known as fall arrest systems or fall protection equipment, are safety devices designed to prevent workers from falling or to arrest a fall in progress. These products are essential in industries such as construction, manufacturing, oil and gas, and utilities, where employees often work at heights or in hazardous environments. Common fall protectors include harnesses, lanyards, anchor points, and safety nets, all engineered to enhance worker safety and compliance with regulatory standards.

Fall Arrest Harnesses, also known as Safety Harnesses or Full Body Harnesses, are a category of safety equipment designed to protect workers from serious injury or death in the event of a fall. They serve to distribute the force of the fall across a worker's body while securely supporting them to reduce impact. Key industries that commonly use these products include construction, roofing, window cleaning, and other fields requiring high altitude work. The usage also extends to industries involved in confined space entry and rescue operations.

Safety Equipment, also known as Personal Protective Equipment (PPE), encompasses a range of products designed to protect workers from hazards in the workplace. This category includes items such as helmets, gloves, goggles, hearing protection, and respiratory masks. Key industries that rely heavily on safety equipment include construction, manufacturing, oil and gas, mining, and chemical processing. These products are essential for ensuring worker safety and compliance with industry regulations.

Fall Protection Kits are essential safety equipment sets designed to protect workers from serious injuries or fatalities due to falls at work. Also known as Fall Arrest Systems, these kits typically include anchorage connectors, body wear such as harnesses, and connecting devices like lanyards or lifelines. They are widely used in industries such as construction, roofing, tower climbing, wind energy, and any other sector where work at height is required.

Anchor Points, often referred to as Fixing Points or Mounting Points, are essential components utilized for securing or anchoring objects, particularly in situations where stability and safety are paramount. These products are extensively used in key industries such as construction, manufacturing, maritime, and automotive. Anchor Points ensure the secure placement and stability of equipment, machinery, or infrastructure, contributing significantly to occupational safety measures.

Established in France, Beal is a prominent brand renowned for its superior safety equipment. With a rich history dating back to 1950, Beal has been a trusted provider for numerous industries, including climbing, mountaineering, and construction. As a market leader, they have consistently demonstrated an unwavering commitment to quality and safety. Their products are meticulously designed and rigorously tested to ensure they meet the highest safety standards. Beal's reputation for excellence has solidified its place as a trusted partner for safety equipment across Europe.

Gloves are designed to safeguard hands from various hazards in industrial environments. They are commonly used to protect against chemicals, abrasions, cuts, and extreme temperatures. Key industries that rely on gloves include manufacturing, construction, healthcare, and food processing. These gloves come in various materials such as latex, nitrile, and leather, each offering specific benefits like chemical resistance, durability, and dexterity. By selecting the appropriate type of glove, businesses can enhance worker safety and maintain compliance with industry standards.

Packaging Supplies, also known as packing materials or shipping supplies, encompass a wide range of products designed to protect, contain, and transport goods efficiently. These supplies include items such as boxes, bubble wrap, packing peanuts, tape, and pallets. Key industries that rely heavily on packaging supplies include manufacturing, logistics, e-commerce, food and beverage, pharmaceuticals, and retail. These materials are essential for ensuring product safety, reducing damage during transit, and optimizing storage and handling processes.

Workwear, also known as industrial clothing or protective apparel, encompasses a range of garments designed to ensure safety, durability, and comfort for workers in demanding environments. Commonly used in industries such as construction, manufacturing, oil and gas, and utilities, workwear includes items like coveralls, high-visibility vests, flame-resistant clothing, and safety footwear. These products are essential for protecting workers from hazards, enhancing visibility, and maintaining compliance with safety regulations.

Food Service & Restaurant Supplies encompass a wide range of products essential for the efficient operation of food establishments. This category, also known as commercial kitchen supplies or foodservice equipment, includes items such as cookware, utensils, and storage solutions. Key industries that rely on these supplies include restaurants, catering services, hotels, and institutional food service providers such as schools and hospitals. These products are crucial for maintaining high standards of food safety, hygiene, and operational efficiency.

Cleaning & Hygiene Supplies, also known as janitorial supplies or sanitation products, encompass a wide range of items designed to maintain cleanliness and promote health in various environments. This category includes cleaning chemicals, disinfectants, paper products, hand sanitizers, and cleaning equipment such as mops and vacuum cleaners. Key industries that rely on these supplies include healthcare, manufacturing, food processing, hospitality industry, and education. These products are essential for ensuring a safe and sanitary environment, helping to prevent the spread of contaminants and maintain operational efficiency.

Tools, Tapes & Bolts encompass a wide range of essential items used for construction, maintenance, and repair tasks across various industries. This category includes hand tools, power tools, adhesive tapes, and fasteners such as bolts, screws, and nuts. Commonly referred to as hardware supplies or fastening solutions, these products are indispensable in sectors like manufacturing, construction, automotive, and aerospace. They ensure the structural integrity and functionality of machinery, buildings, and vehicles, making them critical for procurement buyers focused on quality and reliability.

Beal

Beal Products

Trusted by Over 12,000 Satisfied Customers

Need help?