Ardon Safety James Leather Reinforced Gloves 10,5

Product Features:
- Cuff: reinforced
- Palm material: Full grain pigskin leather
- Back material: Cotton + PES

Technical Details:
- Standard: EN 388 XX11X

Additional Information:
- Also available in a version with resell packaging (SPE)

Ardon Safety Elton Leather Reinforced Gloves resale packaging

Product Features:
- With cuff protector (SPE)
- Reinforced cuff
- Palm material: Cowhide split leather
- Back material: Cotton + PES

Technical Details:
- Standard: EN388:2016 3122X

Product Features:
- Coated on the palm
- Material: PES + cotton
- Coating: latex

Technical Details:
- Standard: EN 388

Ardon Safety Gino Leather Reinforced Gloves 10,5

Product Features:
- Cuff: Cotton
- Palm material: Cowhide split leather
- Back material: PES + cotton

Technical Details:
- Standard: EN388 2016: 3122X

Ardon Safety Gino Leather Reinforced Gloves 10

Ardon Safety Mary Leather Reinforced Gloves 10,5

Product Features:
- Reinforced cuff
- Palm material: cowhide split leather
- Back material: cotton + PES

Technical Details:
- Standards:
— EN388:2016 4134A
— EN407:2020 X1XXXX

Also available in a resell package version (SPE)

Ardon Safety Mary Leather Reinforced Gloves 12

Ardon Safety Percy Leather Reinforced Gloves

Product Features:
- Velcro cuff
- Goat leather palm
- Cotton back

Technical Details:
- Standard: EN388 2016: 2121X

Ardon Safety Top Up Leather Reinforced Gloves 9

Product Features:
- Reinforced cuff
- Palm material: cowhide split leather
- Back material: cotton

Technical Details:
- Standard: EN388 2016: 3122X

Ardon Safety Top Up Leather Reinforced Gloves 11

EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

EN 388:2016+A1:2018 is a European standard that defines the requirements and test methods for safety gloves used in general mechanical risks. The standard specifies the requirements for the resistance against abrasion, cut, tear, puncture, and impact. Test results for EN 388:2016+A1:2018 include measurements of abrasion resistance, cut resistance, tear resistance, puncture resistance, and impact resistance. The standard is intended to ensure that safety gloves used in general mechanical risks provide adequate protection for the user.

EN 388:2003 is a European standard for protective gloves against mechanical risks. It sets requirements for resistance to cuts, tears, punctures, abrasion, and impact. Gloves are tested in labs for these properties and the results are shown as a performance level for each test. The levels are marked on the gloves. This standard also includes requirements for gloves' dexterity, comfort and size.

EN 388:2004 is a European standard that sets out rules for testing protective gloves. It measures how well a glove protects against things like cuts, tears, punctures, abrasion and impact. Test results are given as numbers and symbols, with higher numbers indicating better protection. The standard helps people choose gloves that will keep them safe for different jobs.

EN 388:2006 is a European standard for testing protective gloves. It measures how well a glove protects against things like cuts, tears, punctures, abrasion, impact, and blade cut resistance. The standard also includes a test for blade cut resistance to determine resistance against cutting by sharp tools. Test results are given as numbers and symbols, with higher numbers indicating better protection. The standard helps people choose gloves that will keep them safe for different jobs.

EN 388:2008 is a European standard that sets out rules for testing protective gloves. It measures how well a glove protects against things like cuts, tears, punctures, abrasion, impact, blade cut resistance and puncture resistance. Test results are given as numbers and symbols, with higher numbers indicating better protection. The standard also includes a test for blade cut resistance to determine resistance against cutting by sharp tools. The standard helps people choose gloves that will keep them safe for different jobs.

EN 388:2007 is a European standard for testing protective gloves. It measures how well a glove protects against things like cuts, tears, punctures, abrasion, impact, blade cut resistance and puncture resistance. Test results are given as numbers and symbols, with higher numbers indicating better protection. The standard also includes a test for blade cut resistance to determine resistance against cutting by sharp tools. The standard helps people choose gloves that will keep them safe for different jobs.

EN 388:2005 is a European standard that sets out rules for testing protective gloves. It measures how well a glove protects against things like cuts, tears, punctures, abrasion, and impact. Test results are given as numbers and symbols, with higher numbers indicating better protection. The standard also includes a test for blade cut resistance and a test for puncture resistance. This standard helps people to choose gloves that will keep them safe for different jobs.

CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

In the EN 388:2016 standard, the Abrasion Resistance is measured as the number of cycles required to wear a hole in the glove material using sandpaper under pressure. A result of Level X indicates that this performance metric was not tested for the specific glove. When a glove shows a result of Level X for abrasion resistance, it essentially means there is no available data from testing to confirm how well the glove would withstand abrasion, making it unsuitable for applications where abrasion resistance is critical.

EN 388:2016 is a European standard that outlines the testing requirements for gloves to determine their level of protection against mechanical hazards, including tear resistance. The Tear Resistance Level 1 classification signifies that the gloves offer basic protection against tearing. The test method involves applying a force to a sample of the glove material to tear it, and the force measured reflects the glove's ability to resist tearing. Level 1 tear resistance means the gloves can withstand a force of between 10 to 25 Newtons before tearing. This basic level of protection is suitable for tasks where there is a minimal risk of tearing due to light manual handling or where gloves are used to prevent scratches or minor abrasions. Gloves with Level 1 tear resistance are appropriate for general activities that do not involve handling sharp or jagged materials.

The European standard EN 388:2016 addresses the puncture resistance of protective gloves, with puncture resistance classified from Levels 1 to 4. Specifically, a Level 1 result indicates minimal puncture resistance. This level of resistance is determined by a test involving a standardized stylus with a specified diameter and force. During the test, the stylus is pressed against the material with a force up to 20 Newtons to assess how well the glove can withstand penetration. A Level 1 rating signifies that the glove provides basic protection against small punctures or stabs, appropriate for areas with minimal risk. Practical implications for this test result suggest the gloves are suitable for light tasks where major risks of punctures are not anticipated, but are not adequate for handling sharp tools or heavy equipment where higher penetration resistance would be necessary. 

The standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed. 

EN ISO 21420:2020 is a standard that outlines general requirements and guidelines for protective gloves, aiming to ensure their quality, performance, and suitability for various applications. When a product meets the requirements outlined in the General Requirements section of EN ISO 21420:2020, it signifies that the gloves comply with fundamental quality and performance criteria, including factors such as size, fit, ergonomics, and dexterity. The practical implications of this compliance are significant, as it assures users of the gloves' basic functionality and suitability for general hand protection purposes across a range of industries and applications. The test method involves evaluating various aspects of the gloves, including dimensions, construction, materials, and labeling, to ensure conformity with the specified requirements. Compliance with these general requirements enhances user confidence in the protective gloves' reliability and effectiveness, promoting workplace safety and facilitating compliance with regulatory standards.

PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.

The standard EN 388:2016 includes an assessment of Puncture Resistance, where Level 2 signifies that the material has met specific criteria for resistance against puncture. The result of Level 2 in puncture resistance means that the protective glove or material can withstand a force of 60 to 100 newtons before being punctured. The test method used involves using a standardized steel puncture probe that is pushed against the material at a specified speed until it pierces through it. In essence, achieving a Level 2 puncture resistance under EN 388:2006 suggests that the protective equipment offers moderate protection against punctures, making it suitable for environments where there is a risk of encountering sharp objects such as needles, but are not excessively sharp or exert very high force. 

EN 388:2016 is a European standard that sets criteria for testing the mechanical risks for protective gloves, including abrasion, cut, tear, and puncture resistance. The Tear Resistance Level 2 designation indicates that the gloves have a moderate level of resistance to tearing. The test for tear resistance involves subjecting a sample of the glove material to a force until it tears, and the force required to initiate and propagate the tear is measured. Gloves that achieve Level 2 tear resistance can withstand between 25 to 50 Newtons of force. This level of tear resistance is suitable for tasks where gloves might face moderate stresses that could cause tearing, such as general handling and light industrial work where sharp or jagged materials are handled less frequently. These gloves provide reliable protection and durability in scenarios where some degree of mechanical risk is present but not excessively severe.

EN 388:2016 is a European standard that provides guidelines for assessing the protection levels of gloves against mechanical risks, such as abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 3 indicates a higher level of protection, signifying that the gloves can resist more intensive wear from rough materials. According to the standard, the abrasion resistance test involves rubbing the glove material against sandpaper under a specified pressure until it is worn through. Level 3 abrasion resistance requires that the gloves withstand 2000 to 7999 cycles of abrasion. This enhanced level of durability is appropriate for tasks involving more frequent or more intense contact with abrasive surfaces, such as construction work, woodworking, and handling building materials. Gloves with Level 3 abrasion resistance offer a robust barrier against wear, extending glove life and providing increased protection for the wearer’s hands, thus reducing the risk of injuries in more demanding work environments.

The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.

EN 388:2016 is a European standard that establishes criteria for assessing the protection provided by gloves against mechanical hazards, including tear resistance. The Tear Resistance Level 4 classification represents the highest level of tear resistance defined by this standard, indicating that the gloves can withstand the most substantial forces before tearing. According to the testing methodology, gloves are evaluated by measuring the force required to tear a sample of the glove material, with Level 4 requiring a force of over 75 Newtons to initiate and propagate a tear. This high level of tear resistance is ideal for use in environments where gloves are subjected to significant stress and potential damage, such as in heavy industry, construction, and handling of materials with sharp edges. Gloves achieving this level offer superior durability and are essential for ensuring user safety in high-risk mechanical settings, thereby enhancing work efficiency and reducing the frequency of glove replacement.

EN 388:2016 standard features a Coup Test used to measure Cut Resistance, and a result of Level 2 indicates moderate protection against cuts. This level signifies that the material being tested withstood between 2.5 to 5.0 cutting cycles before the blade penetrated the glove during testing. The Coup Test involves a rotating circular blade with a constant force applied, moving back and forth across the material until a cut through occurs. The sharpness of the blade and the distance of blade travel are measured before the test, and after cutting through the material, to ensure accuracy. Practical implications of a Level 2 result suggest the gloves are suitable for tasks with some cut hazards but are not suggested for high-risk cut environments, such as handling heavy or very sharp materials where a higher level of protection might be necessary. This result helps businesses choose gloves tailored for different workplace needs regarding cut risks.

The company ARDON SAFETY s.r.o. is one of the leading companies with working/leisure clothes, protective/outdoor footwear and personal protective equipment in Central Europe. Under the ARDON® brand, the company develop and produce premium workwear/footwear and outdoor products. The ARDON® assortment includes over ten thousand stock items which distribute from modern central warehouse located in Czech republic.

Gloves protect hands and are designed to ensure safety and hygiene in various environments. Commonly referred to as hand protection, these products are crucial for preventing injuries and contamination. Industries such as healthcare, manufacturing, and food service use gloves to maintain high standards of safety and cleanliness.

Packaging supplies include a range of products designed to facilitate the packaging and transportation of goods. The category includes packing materials or mailing supplies, these items are crucial for ensuring the safe and efficient delivery of products. Industries such as e-commerce, logistics, and manufacturing use shipping supplies to maintain operational effectiveness and customer satisfaction.

Safety equipment includes a range of products designed to protect workers from hazards in their environment. Also referred to as personal protective equipment, these products are essential for maintaining safety and compliance in the workplace. Industries such as construction, manufacturing, and healthcare use safety equipment to ensure worker protection and operational efficiency.

Workwear includes garments designed for various environments and purposes, often referred to as work clothes. These products are essential for ensuring comfort, protection, and professional appearance in different settings. Industries such as retail, hospitality, and healthcare use appropriate work clothing to meet their operational needs and maintain standards.

Food Service & Restaurant Supplies refer to all equipment, utensils, and other essential items utilized in the food and beverage industry to prepare, serve, and manage food-related operations. Also known as Hospitality or Catering supplies, these products are integral to a wide range of industries including restaurants, cafes, bars, catering companies, hotels, and institutions such as schools and hospitals. They enhance efficiency and functionality in food preparation, presentation, and customer service, ensuring a streamlined operation in these establishments.

Cleaning and hygiene supplies include products designed to maintain cleanliness and promote health in various environments. Often called janitorial supplies or sanitary products, these items are essential for preventing the spread of germs and ensuring a clean workspace. Industries such as healthcare, hospitality, and food service use these supplies to uphold hygiene standards and operational efficiency.

Tools, tapes, and bolts encompass a variety of items essential for construction, repair, and maintenance tasks. Often referred to as hardware or fastening supplies, these products are key to ensuring the stability and functionality of projects. Industries such as construction, manufacturing, and maintenance use quality tools, tapes, and bolts to perform tasks efficiently and safely.

Ardon Safety

Ardon Safety Products

Drastically reduce time spent ordering

Need help in choosing?

Our website uses cookies