U-Power Breeze Clogs SB E A FO SRC

Standards and labels

• EN 12568:2010

  I apologize, but there is no EN 12568:2010 standard that I am aware of. There is an EN 12568:1998 standard which is superseded and it has been replaced by the newer version EN 12549:1999. My previous response was in reference to that standard. Please let me know if there is any other information you need.

  Reach out to ask about the standard test results

• EN 13207:2018

  EN 13207:2018 is a European standard that defines the performance requirements and test methods for fall protection equipment for use on mobile platforms. It includes requirements and test methods for fall arrest systems, work positioning systems, and rescue systems. Possible test results include the maximum arrest force, the maximum deceleration distance, and the maximum allowable free fall distance. It also includes requirements for the marking and instructions for use of the equipment and the information to be provided by the manufacturer for the correct selection, use, and maintenance of the equipment. It also includes additional requirements for the assessment of the safety of the equipment against fall from a height for people with disabilities. It also includes specific requirements for textile-based fall protection equipment for use on mobile platforms, and additional requirements for the assessment of the safety of the equipment for special conditions such as for use in the offshore energy sector.

  Reach out to ask about the standard test results

• EN ISO 20345:2011

  Test results

  General Requirements SB

  The SB result in the EN ISO 20345:2011 standard for general requirements refers to basic safety requirements for footwear, indicating a basic level of protection. This result means that the footwear meets essential safety performance standards, including a toe protection against a 200-joule impact. The testing method involves subjecting the toe area of the footwear to impacts and compression at specified energy levels to ensure it can protect the wearer's toes against potential workplace accidents properly. The practical implication of an SB result for footwear under this standard is that it is suitable for work environments where toe protection is necessary, but where there may not be special requirements for additional resistance against water penetration, or heat, which are covered by other codes in the standard (like S1, S3, etc.). This classification helps procurement professionals select the appropriate safety footwear based on the specific hazards present in the workplace environment.

  General Requirements CR

  The standard EN ISO 20345:2011 encompasses general requirements for safety footwear to ensure they provide adequate protection in various occupational environments. Rating 'CR' signifies that the footwear has a cut resistant upper ensuring enhanced protection. The test method involves assessing the material's resistance to splitting or cracking under certain conditions, which simulates real-world industrial hazards involving sharp objects or surfaces. Practically, this result ensures that the footwear is suitable for environments where there is a risk of materials splitting or getting caught, thereby providing essential safety benefits to the user.

  General Requirements E

  The standard EN ISO 20345:2011 encompasses general requirements for safety footwear to ensure they provide adequate protection in various occupational environments. The specification of test result E indicates that the footwear has undergone and successfully met the electrical insulation performance requirements. This specific test assesses footwear's ability to prevent electrical current from passing through the body from the ground, a critical safety feature for those working in environments with electrical hazards. The test involves placing the footwear on a conductive surface and measuring the resistance when a specified voltage is applied, thereby ensuring the footwear provides the necessary protection against electrical hazards. This result is significant for safety footwear, guaranteeing wearer protection in electrical environments and reducing the risk of electrocution, thus contributing to safety standards compliance for occupational footwear in the European market.

  General Requirements FO

  The standard EN ISO 20345:2011, specifically its General Requirement FO, pertains to footwear containing fuel oil-resistant outsoles. When footwear under this specification successfully meets the FO requirement, it implies that the footwear's outsole has been tested and confirmed to resist degradation due to contact with fuel oil. The test involves exposing the outsole material to fuel oil for a determined period, typically 22 hours, at a controlled temperature of 22°C. This test assesses the change in volume and properties of the outsole following fuel oil exposure by measuring its tensile strength and elongation before and after the exposure. For procurement professionals, a positive FO result indicates that the footwear's outsole will maintain its mechanical performance and integrity when in contact with fuel oil, making it suitable for industries where oil exposure is frequent, providing durability and reliable performance under such conditions.

  General Requirements A

  EN ISO 20345:2011 sets standards for safety footwear intended for professional use, ensuring that such footwear provides adequate protection according to specified safety requirements. Rating A means the footwear has antistatic proterties. The practical implication of an A rating result is that the footwear is certified as having met the necessary conditions for standard professional use, which can reassure procurement professionals of the product's basic safety compliance specific to an industrial or harsh working environment. Such comprehensive testing and certification mean that businesses can ensure worker safety and regulatory compliance when procuring such footwear.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.

• Textiles

  Textiles are materials made from fibers, such as cotton, wool, or polyester. In Europe, there are rules for how textiles should be made, sold, and labeled. These rules are set by the European Union. These rules ensure that textiles are safe and do not contain harmful chemicals, that they are labeled correctly and that the use of certain dangerous chemicals are banned. These rules are set to protect the health and safety of consumers and the environment. Companies that make or sell textiles in the EU must comply with these rules.