Standards and labels

• ISO 14001:2015

  ISO 14001:2015 is a standard that specifies requirements for an environmental management system (EMS). It includes requirements for how companies should design, implement, maintain and improve their EMS to ensure that they minimize negative impacts on the environment and comply with environmental regulations. Test results can include information on how well the EMS is functioning, how well it is being followed, and how effective it is in reducing environmental impacts. The standard also includes requirements for how the company should document and record their EMS performance and continuously improve it.

  Test results

  Environmental Management Passed

  The standard ISO 14001:2015 pertains to environmental management systems (EMS). A passed test result under this standard indicates that an organization's EMS meets the stringent criteria set forth for managing environmental responsibilities systematically. This ensures sustainable development while considering environmental impacts. Specifically, ISO 14001:2015 includes requirements for a framework that an organization can follow rather than establishing environmental performance criteria. It encompasses various aspects such as compliance obligations, planning actions to address risks and opportunities, and continual improvement. The test primarily involves evaluating the effectiveness of the EMS in supporting a company to achieve its intended outcomes regarding its environmental performance. If a company has passed this evaluation, it reflects their commitment to environmental stewardship, potentially enhancing their marketability and aiding in compliance with statutory and regulatory requirements.

• EN ISO 9001:2015

  EN ISO 9001:2015 is a standard that sets out the requirements for a quality management system (QMS). It is a set of guidelines that organizations can follow to ensure that they meet customer requirements and enhance customer satisfaction. The standard is based on the plan-do-check-act model and focuses on continuous improvement. It covers the design, development, production, installation, and servicing of products. Organizations can get certified to this standard, which means that they have been independently audited and found to meet the requirements of the standard. The certification process includes regular audits to ensure that the organization continues to meet the standard's requirements.

  Test results

  Service Reliability Passed

• EN 149:2001+A1:2009

  EN 149:2001+A1:2009 is a European standard for filtering half masks for protecting against particles and it is an amendment of EN 149:2001. It outlines additional requirements for mask design and performance testing. The mask must be able to filter a certain percentage of particles, have good breathability, and fit securely to the face. The test results shows how well the mask filters and how easy it is to breathe through, also it includes a test for the mask's ability to fit securely to the face. It also specifies the mask's ability to filter out specific airborne particles like dust, mist, and fumes. It includes additional requirements for the performance of the mask, such as the ability to seal against the face and the mask's durability.

  Test results

  Reusability NR - Not Reusable

  The standard EN 149:2001+A1:2009 designates a classification for filtering half masks, distinguishing between those that are re-usable (R) and non-reusable (NR). When a mask is classified as NR - Not Reusable, as per the result identified for EN 149:2001+A1:2009 NR, it implies that the mask is intended for single use only and should not be used more than once. The test method for determining reusability under this standard involves assessing the mask's material integrity, filter efficiency, and structural stability after simulated use, which might include cleaning, disinfection, and aging procedures. The practical implications of this result are significant; masks labeled as NR must be discarded after one use, highlighting a critical consideration for procurement professionals in terms of inventory, cost management, and usage protocols to ensure safety and compliance.

  Dolomite Test D

  The EN 149:2001+A1:2009 Dolomite Test, conducted within the framework of EU standards, assesses the resistance of respiratory protective filter masks to clogging by dolomite dust, thus ensuring longer-lasting filter performance under dusty conditions. A result labeled as D in the context of this test indicates that the mask has passed the dolomite dust clogging test and can maintain good breathing resistance over an extended period in a dusty environment, making it suitable for use in high particulate environments. The test method involves exposing the respiratory mask's filter to dolomite dust under controlled conditions and measuring its resistance to clogging (breathing resistance before and after exposure). After successfully passing this test, the mask can be marked with the letter D to signify its performance level, assisting employers or workers in making informed decisions regarding the level of respiratory protection required for specific industrial settings.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.