Singer Safety Welding Goggles

Standards and labels

• EN 169:2002

  EN 169:2002 is a European standard that defines the requirements and test methods for the performance of smoke and heat control systems in buildings. The standard specifies the minimum levels of performance that the system must meet, as well as the methods that should be used to test the system to ensure it meets these requirements. Possible test results include the ability of the system to control the spread of smoke and heat, the airflow rate and pressure drop of the system, and the resistance to fire spread.

  Reach out to ask about the standard test results

• EN 166:2001

  EN 166:2001 is a European standard for personal eye protection. It sets the guidelines for safety eyewear like goggles and face shields. It includes requirements for impact resistance, lens clarity and field of vision. Test results will show if the eyewear meets the standard's requirements or not.

  Reach out to ask about the standard test results

• EN 171:2002

  EN 171:2002 is a European standard for the measurement of sound insulation of building elements that separate rooms used for residential, educational, or other specific purposes. However, this standard is withdrawn and replaced by other standards like EN 17104:2021. This standard was specifying the requirements for the measurement of sound insulation performance of separating elements, such as walls and floors, and sets out test methods and criteria for assessing the results. It aimed to provide a consistent and reliable method for measuring sound insulation in buildings between different types of rooms, to ensure that separating elements in buildings provide adequate sound insulation. The test results were typically presented in terms of sound reduction index (Rw) and/or weighted sound reduction index (R'w). The test results were presented in dB.

  Reach out to ask about the standard test results

• EN 175:1997

  EN 175:1997 is a European standard that specifies the requirements and test methods for welding filters, and filter sets for use with arc welding and cutting equipment. The standard includes requirements for optical density, filter efficiency, and safe use. Test results for EN 175:1997 include measurements of the filter's optical density, filter efficiency, and safe use. Additionally, it includes requirements for the labeling, marking, and packaging of the filter. The standard is intended to provide the user with information on the filter's performance, and to ensure that the filter is safe to use.

  Reach out to ask about the standard test results

• ISO 14001:2015

  ISO 14001:2015 is a standard that specifies requirements for an environmental management system (EMS). It includes requirements for how companies should design, implement, maintain and improve their EMS to ensure that they minimize negative impacts on the environment and comply with environmental regulations. Test results can include information on how well the EMS is functioning, how well it is being followed, and how effective it is in reducing environmental impacts. The standard also includes requirements for how the company should document and record their EMS performance and continuously improve it.

  Test results

  Environmental Management Passed

  The standard ISO 14001:2015 pertains to environmental management systems (EMS). A passed test result under this standard indicates that an organization's EMS meets the stringent criteria set forth for managing environmental responsibilities systematically. This ensures sustainable development while considering environmental impacts. Specifically, ISO 14001:2015 includes requirements for a framework that an organization can follow rather than establishing environmental performance criteria. It encompasses various aspects such as compliance obligations, planning actions to address risks and opportunities, and continual improvement. The test primarily involves evaluating the effectiveness of the EMS in supporting a company to achieve its intended outcomes regarding its environmental performance. If a company has passed this evaluation, it reflects their commitment to environmental stewardship, potentially enhancing their marketability and aiding in compliance with statutory and regulatory requirements.

• EN ISO 9001:2015

  Test results

  Service Reliability Passed

  EN ISO 9001:2015 is a globally recognized standard that specifies requirements for a quality management system (QMS), focusing on numerous aspects of quality management in organizations, aiming to enhance customer satisfaction through the effective application of the system. The 'Service Reliability' with a 'Passed' designation indicates that an organization has successfully demonstrated its ability to consistently provide services that meet customer and regulatory requirements while aiming for continual improvement. This assessment involves evaluating various elements of the QMS including service planning, execution, and monitoring, to ensure reliability and performance consistency. The practical implications for organizations that pass this aspect of the standard are significant; it establishes them as reliable providers in their industry, enhancing customer trust and satisfaction, and potentially leading to increased business and a competitive advantage.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.