Modaflame Knit Hi-Vis FR Long Sleeve T-Shirt, Yellow

Standards and labels

• EN 1149-5:2018

  Protective clothing with the EN 1149-5:2018 rating is tested for its ability to dissipate electrostatic charges. This prevents sparks that could ignite explosive atmospheres, keeping the wearer safe in hazardous environments.

  Test results

  Material Performance Tested

  This garment's material is designed to dissipate static electricity, preventing sparks that could ignite flammable or explosive atmospheres. It is intended for use as part of a total earthed system in hazardous environments like petrochemical refineries.

• EN IEC 61482-1-2:2018

  Protective clothing with the EN IEC 61482-1-2:2018 rating is tested for its resistance to the thermal effects of an electric arc flash using a "box test" method. This ensures the garment provides a certified level of protection, significantly reducing the risk of burn injuries from unexpected electrical incidents.

  Test results

  Low-voltage Circuit Arc APC 1

  This garment protects you from the thermal hazards of a sudden electric arc flash. It is rated Arc Protection Class 1 (APC 1), tested to shield against a 4kA short circuit electric arc.

• EN IEC 61482-1-1:2019

  Protective clothing with the EN IEC 61482-1-1:2019 rating is tested for its ability to protect against the thermal hazards of an electric arc by determining its arc rating (ELIM, ATPV, or EBT). This ensures the clothing significantly reduces the risk of burn injury from an electrical arc flash, with the ELIM rating indicating a 0% burn probability for enhanced safety.

  Reach out to ask about the standard test results

• EN 11612:2015

  Protective clothing, including garments, gaiters, hoods, and overboots, with the EN 11612:2015 rating are tested for protection against various heat and flame hazards like limited flame spread, convective heat, radiant heat, and splashes from molten metals. This ensures the clothing meets minimum safety standards for specific thermal risks, helping you choose gear that provides essential protection in hazardous environments.

  Reach out to ask about the standard test results

• EN 11611:2015

  Protective clothing with the EN 11611:2015 rating is tested for protection against molten metal splashes, limited flame spread, radiant heat from welding, and reduced electrical shock risk. This ensures professionals in welding and allied processes are protected from common hazards, helping to minimize injuries.

  Test results

  Welding Protection Class 1

  This garment offers protection for less hazardous welding work. It protects the wearer against small splashes of molten metal, brief contact with flames, and radiant heat from the welding arc.

• EN 61482-2

  Protective clothing with the EN 61482-2 rating is tested for protection against the thermal hazards of an electric arc, such as intense heat and flames. This means the clothing helps prevent severe burns by limiting heat transfer during an arc flash incident, enhancing user safety.

  Reach out to ask about the standard test results

• EN ISO 20471:2013

  High-visibility clothing with the EN ISO 20471:2013 rating is tested for its ability to visually signal the wearer's presence in all light conditions, including daylight and vehicle headlights in the dark. This ensures the clothing makes you clearly visible to others, significantly reducing the risk of accidents in hazardous environments.

  Test results

  Reflective Strip Area Grade 3

  Provides the highest level of visibility in high-risk environments with poor light or bad weather. Garments have a large area of fluorescent material and reflective tape that covers the torso and has full-length sleeves or trousers.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.