WeeSafe WeePro Max Coverall Type 4/5/6, Dark Green/Green

Standards and labels

• EN ISO 13982-1:2004

  EN ISO 13982-1:2004 is a European standard that specifies the requirements and test methods for Type 5 protective clothing designed to protect against airborne solid particles. It sets criteria for material resistance and construction to prevent penetration of hazardous particles such as dust, fibers, and powders. The standard ensures that the garments provide effective protection in industries where workers may be exposed to such particles, but it should not be relied upon for protection against liquid chemicals or vapors.

  Test results

  Airborne Solid Particle Protection Type 5

• EN 14605:2005

  EN 14605:2005 is a European standard that sets rules for how certain types of protective clothing should be tested and what requirements they must meet in order to be considered safe and effective against chemical hazards. The standard covers the test methods and performance requirements for chemical protective clothing such as coveralls, gloves, boots and overalls. The standard also sets requirement for labeling, packaging and storage of these clothing. Tests must be done to make sure the protective clothing meets the standard. If the protective clothing pass the tests, they are considered good to use.

  Reach out to ask about the standard test results

• EN 25978:1993

  EN 25978:1993 is a European standard that sets out the performance requirements and test methods for portable gas detectors used in potentially explosive atmospheres. The standard specifies requirements for the accuracy, stability, and response time of the detector, as well as for its design, construction, and labeling. Test results for compliance with the standard should show that the detector meets the specified performance requirements.

  Reach out to ask about the standard test results

• EN 530:1994

  Reach out to ask about the standard test results

• EN 863:1995

  EN 863:1995 is a European standard that sets out the requirements for stationary fire extinguishers. These are devices that can put out fires by extinguishing the flames, and are typically installed in a fixed location like a building or vehicle. The standard covers the performance requirements for fire fighting capability, mechanical strength, durability, safety and environmental factors of stationary fire extinguishers. To meet this standard, a stationary fire extinguisher must be able to effectively put out a fire, be able to withstand certain mechanical stress, be resistant to wear and tear, have safety features such as pressure relief devices and warning devices, be able to function in different environmental conditions, and have clear markings and instructions for use. Possible test results include measurements of the extinguisher's fire fighting capability, its mechanical strength, durability, safety features, environmental factors and user instructions.

  Reach out to ask about the standard test results

• EN ISO 13934-1:1999

  EN ISO 13934-1:1999 is a standard for testing the strength of textile fabrics. It sets guidelines for measuring how much force a fabric can withstand before breaking. The fabric needs to meet certain requirements such as minimal elongation and minimal breaking strength. The test results will give a value in newtons or similar unit of force. It's used to evaluate the quality and durability of fabrics.

  Reach out to ask about the standard test results

• EN ISO 13935-2:1999

  EN ISO 13935-2:1999 is a standard that defines the methods for testing the tear propagation resistance of textile fabrics. It includes requirements for testing equipment, sample preparation and test procedures. Test results should include the tear propagation resistance, measured in newton. The standard applies to all types of fabrics, and it is used to measure how well a fabric resists tearing or spreading of a tear once it has started.

  Reach out to ask about the standard test results

• EN ISO 7854:1997

  EN ISO 7854:1997 is a standard for testing the flammability of automotive interior materials. It specifies the method for measuring the burning behavior of materials used in car interiors such as seats, dashboard, door panels, and headliners in a vertical position. The performance requirements include how quickly the material burns, how much it continues to burn after the flame is removed, and how much smoke is produced. Possible test results include a flame spread index, after flame index, smoke density, and toxic gas emissions. These test results are used to evaluate the flammability of the materials used in car interiors and to classify it according to the standard's criteria.

  Reach out to ask about the standard test results

• EN ISO 9073-4:1997

  EN ISO 9073-4:1997 is a standard that sets rules for testing and measuring the performance of textile fabrics. It specifies the test methods and performance requirements for the resistance of textile fabrics to water penetration, which refers to how well the fabric repels water and prevents it from penetrating the fibers. The test results are measured in terms of the fabric's resistance to water penetration. The performance requirement is that the textile fabric must meet certain standards for resistance to water penetration, meaning it should repel water well and prevent it from penetrating the fibers.

  Reach out to ask about the standard test results

• EN 13034:2005

  EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.

  Test results

  Liquid Chemical Protection Type 6

  EN 13034:2005 specifies the requirements and test methods for protective clothing that provides limited protection against liquid chemicals, designated as Type 6. The 'Type 6' classification indicates that the clothing has been tested and found capable of resisting light spray and minor splashes of liquid chemicals. This test method assesses the fabric's ability to prevent penetration from a synthetic blood solution sprayed at the garment at different angles and pressures, simulating realistic conditions where accidental chemical splashes might occur. Protective clothing that achieves this classification is essential for workers in industries such as chemical manufacturing, painting, or pesticide application, where there is a risk of exposure to harmful liquids but full immersion is not expected, thus enhancing worker safety by providing sufficient protection in low-volume chemical exposure scenarios.

• EN 1149-5:2008

  EN 1149-5:2008 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. The standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

  Test results

  Material Performance Tested

  The EN 1149-5:2008 standard specifies the performance requirements for material used in protective clothing designed to avoid incendiary discharges. The test result Tested means that the material has undergone relevant evaluation procedures to confirm its static dissipative properties. These tests generally involve measuring the electrical resistance of the material in ohms (Ω) to determine its capability to dissipate electrostatic charges and prevent sparking that could ignite flammable substances. The practical implications of this result for the respective product category (like protective workwear for use in explosive atmospheres) are significant, as it ensures that the clothing provides a level of protection against electrostatic discharges, potentially reducing the risk of fire or explosion in environments with flammable gases, vapors, or dusts.

• EN 14126:1999/AC:2002

  EN 14126:1999/AC:2002 is a European standard that is an amendment of EN 14126:1999 and gives additional test methods for the evaluation of the resistance of medical clothing to penetration by infective agents. It specifies additional test methods for clothing materials and for clothing in the form of gowns and coveralls. The testing includes resistance to penetration by microorganisms, viral penetration, and resistance to penetration by blood and body fluids. Possible test results would include pass or fail based on whether the clothing meets the safety and performance requirements outlined in the standard.

  Reach out to ask about the standard test results

• EN 1073-2:2002

  EN 1073-2:2002 is a European standard that defines the requirements for measuring and evaluating the resistance of textiles to penetration of airborne radioactive particles. The standard includes procedures for measuring the ability of textile materials to prevent the penetration of radioactive particles through the fabric. The performance requirements specify the conditions for testing, as well as the evaluation criteria for determining resistance. Possible test results include a rating on a scale of 1-5, with 5 indicating the highest level of resistance to particle penetration.

  Reach out to ask about the standard test results

• EN 13274-4:2001

  EN 13274-4:2001 is a European standard for testing and evaluating the performance of building ventilation systems. It specifies the procedures for measuring the airflow rate, pressure and sound level of ventilation systems in buildings. The standard also defines the performance requirements for ventilation systems, including minimum airflow rates and sound levels. Possible test results include the measured airflow rate, pressure and sound level of the ventilation system, and whether it meets the performance requirements specified in the standard.

  Reach out to ask about the standard test results

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.