Name: Kong 8W985 Comfortable Safety Harnesses
Brand: Kong
SKU: KNG-8W985
Price: 3342.19 SEK
Availability: InStock

Fall Protectors

Product Guides <li><a href='https://droppe.com/blog/article/roof-safety-harness-buying-guide/' target='_blank'>How To Choose The Right Roof Safety Harnesses</a></li>

Related Content <li><a href='https://droppe.com/blog/article/roof-safety-harness-buying-guide/' target='_blank'>How To Choose The Right Roof Safety Harnesses</a></li>

Kong

Kong Itaka Safety harness in a 1 piece batch.

Equipped with three attachment points (ventral, chest and back) and two lateral positioning rings in light alloy, which can be locked in closed position to prevent accidental entanglement.

The harness has ample padding and a lightweight waistband for increased breathability.

Made to fit the Hammock seat thanks to two textile loops sewn into the front waistband.

Two loops on the shoulder straps to which the Diapason system can be attached for vertical recovery.

The waist belt is equipped with two large toothed loops and four textile loops for direct connection of tool bags.

The rear attachment ring is positioned high on the back for carrying backpacks and/or oxygen cylinders.

Equipped with an NFC chip to facilitate product traceability and speed up periodic inspections.

Comes with accessories: two special textile shoulder straps or belt attachment loops that can be removed with Velcro.

150 kg certificate

EN 358:2018 is a European standard that tells manufacturers how to make body belts and body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the body belts and body harnesses. This standard has been updated from previous versions to include new safety requirements and test methods.

EN 358:1999 is a European standard that tells manufacturers how to make body belts and body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the body belts and body harnesses.

EN 358:1992 is a European standard that describes the requirements and test methods for body belts and body harnesses used for personal fall protection. It sets guidelines for how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the body belts and body harnesses.

EN 361:2002 is a European standard that tells manufacturers how to make full body harnesses that are used for personal fall protection. It sets guidelines on how well they should perform, how they should be tested, and the information that should be provided with the product. The test results will show the strength and safety of the full body harnesses. It also states that the manufacturers should provide information about the product performance and safety instructions with the full body harnesses.

EN 813:2008 is a European standard that sets out the requirements for helmet for use in alpine skiing and snowboarding. The standard covers the performance requirements for safety, impact resistance, penetration resistance and the ergonomic requirements of the helmet. To meet this standard, a alpine ski or snowboard helmet must be able to protect the head from impact and penetration, and fit comfortably on the head. Possible test results include measurements of the helmet's impact resistance, penetration resistance and fit, as well as an evaluation of its ability to resist wear and tear and environmental factors. The standard also includes requirements for the proper use, maintenance, marking and identification of alpine ski or snowboard helmets.

CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

Fall Arrest Harnesses, also known as Safety Harnesses or Full Body Harnesses, are a category of safety equipment designed to protect workers from serious injury or death in the event of a fall. They serve to distribute the force of the fall across a worker's body while securely supporting them to reduce impact. Key industries that commonly use these products include construction, roofing, window cleaning, and other fields requiring high altitude work. The usage also extends to industries involved in confined space entry and rescue operations.

Safety Equipment, also known as Personal Protective Equipment (PPE), encompasses a range of products designed to protect workers from hazards in the workplace. This category includes items such as helmets, gloves, goggles, hearing protection, and respiratory masks. Key industries that rely heavily on safety equipment include construction, manufacturing, oil and gas, mining, and chemical processing. These products are essential for ensuring worker safety and compliance with industry regulations.

Fall protectors, also known as fall arrest systems or fall protection equipment, are safety devices designed to prevent workers from falling or to arrest a fall in progress. These products are essential in industries such as construction, manufacturing, oil and gas, and utilities, where employees often work at heights or in hazardous environments. Common fall protectors include harnesses, lanyards, anchor points, and safety nets, all engineered to enhance worker safety and compliance with regulatory standards.

Kong's story began in 1830 in a workshop at the foot of the Alps. The concern to give maximum protection to human life led Bonait to export its products and philosophy all over the world. His carabiners have since become a true fixture for anyone who practices vertical sports. In 1977, Bonaiti changed its name to Kong, but its mission remained the same.

Product description

Request a free sample

Standards and labels

Kong delivery terms

Kong 8W985 Comfortable Safety Harnesses

Kong

Autonomous sourcing platform

Sourcing

Ordering

Recommended products