Product description
These robust work gloves combine cowhide and split leather for optimum protection and durability when welding. With their 35 cm long cuff and high-quality double-seam finish, they offer comprehensive safety for demanding welding work. The full lining ensures additional comfort and protection.
Product features:
- Combination of cowhide and split leather
- 35 cm protection level for comprehensive hand coverage
- High-quality double-stitched finish
- Fully lined for increased comfort
Technical details:
- Material: cowhide and split leather
- Complete leather construction
- Fully lined design
- India quality
Certifications:
- PSA VO (EU) 2016/425 CAT II
- EN 21420
- EN 388
- EN 407
- EN 13997
- Cut Resistant
- Welding
- Hand Protection
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN 13997:1999 is a European standard for fire dampers. Fire dampers are devices that are installed in buildings to stop the spread of fire and smoke. The standard tells how these devices should be designed, installed, and checked to make sure they work well. It also tells how well the devices should work during a fire, like how long they can stop fire and smoke from spreading. Test results show if the fire dampers meet the requirements of the standard and work as they should during a fire.
EN ISO 21420:2020 is a European standard that sets out the general requirements for hand protection, including comfort, fit, and dexterity.
Test results
General Requirements GuideEN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.
Test results
Cut Resistance, Coup Test Level 1The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.
Abrasion Resistance Level 3EN 388:2016 is a European standard that provides guidelines for assessing the protection levels of gloves against mechanical risks, such as abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 3 indicates a higher level of protection, signifying that the gloves can resist more intensive wear from rough materials. According to the standard, the abrasion resistance test involves rubbing the glove material against sandpaper under a specified pressure until it is worn through. Level 3 abrasion resistance requires that the gloves withstand 2000 to 7999 cycles of abrasion. This enhanced level of durability is appropriate for tasks involving more frequent or more intense contact with abrasive surfaces, such as construction work, woodworking, and handling building materials. Gloves with Level 3 abrasion resistance offer a robust barrier against wear, extending glove life and providing increased protection for the wearer’s hands, thus reducing the risk of injuries in more demanding work environments.
Tear Resistance Level 3EN 388:2016 is a European standard that specifies methods for testing the resistance of protective gloves against mechanical hazards, such as abrasion, cuts, punctures, and tearing. The Tear Resistance Level 3 indicates a high level of protection, where the gloves can withstand significant tearing forces. The test for determining tear resistance involves subjecting the glove material to a mechanical force until it tears, measuring the force required to initiate and continue the tear. For Level 3, gloves must withstand a force between 50 to 75 Newtons before tearing. This robust level of tear resistance is particularly suitable for demanding environments where gloves are exposed to activities that might cause extensive wear or tearing, such as handling heavy or rough materials, industrial assembly, and construction tasks. Gloves with this level of tear resistance provide enhanced durability and safety, reducing the risk of injuries and increasing the longevity of the glove in tough working conditions.
Puncture Resistance Level 2The standard EN 388:2016 includes an assessment of Puncture Resistance, where Level 2 signifies that the material has met specific criteria for resistance against puncture. The result of Level 2 in puncture resistance means that the protective glove or material can withstand a force of 60 to 100 newtons before being punctured. The test method used involves using a standardized steel puncture probe that is pushed against the material at a specified speed until it pierces through it. In essence, achieving a Level 2 puncture resistance under EN 388:2006 suggests that the protective equipment offers moderate protection against punctures, making it suitable for environments where there is a risk of encountering sharp objects such as needles, but are not excessively sharp or exert very high force.
Cut Resistance, ISO 13997 Level AThe cut resistance result of Level A based on ISO 13997 in the standard EN 388:2016 indicates a force of greater than 2 Newtons required to cut through the material. This is considered the first level on a scale that ranges up to Level F, where each level corresponds to higher thresholds of force needed to penetrate the material, with Level F exceeding 30 Newtons. The testing method employs a TDM test device equipped with a single-use straight edge blade. During the test, the blade is drawn only once across the material in one direction, and once the blade cuts through the sample, the distance the blade has traveled is recorded. This standardized testing ensures that the cut resistance of materials like gloves can be measured more accurately, especially those fabricated from high-cut resistance materials that might blunt a blade. The practical implication of obtaining a result of Level A in this test is that the material provides basic cut protection and is suitable for tasks with minimal cut hazards, such as light material handling or small parts assembly.
EN 407:2020 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal, and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:2004, it includes new requirements, testing methods and performance levels to ensure that the gloves provide better protection against thermal risks such as heat, fire and molten metal splash.
Test results
Burning Behaviour Level 4The EN 407:2020 standard specifies the requirements for protective gloves meant to guard against thermal risks like heat and/or fire. For Level 4 in the 2020 update of the standard, gloves must meet stringent requirements following exposure to fire. They should exhibit an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds. This level of protection is crucial for environments with a high risk of exposure to intense and sustained flames, offering maximum safety for the wearer in hazardous conditions.
Heat Contact Level 1EN 407:2020 sets the standard for evaluating the performance of protective gloves against thermal risks. A result of Level 1 for Heat Contact indicates minimal protection, where the glove material can delay the transfer of heat from a surface at 100°C for at least 15 seconds. This test result is established through method EN ISO 12127-1, where a glove sample is exposed to a hot surface at a specified temperature and the time is measured until the glove's interior temperature rises by a certain degree. For procurement professionals, a Level 1 rating suggests suitability for environments with low heat risks, providing brief contact protection that can be crucial for tasks involving occasional, quick contact with warm objects without continuous exposure to high heat.
Heat Convection Level 4EN 407:2020 is an updated European standard that outlines the performance requirements for protective gloves designed to defend against thermal risks, including heat from convection. Heat Convection Level 4 under this standard indicates a high level of protection, meaning the gloves are capable of significantly delaying the transfer of heat from hot gases or liquids. Specifically, Level 4 protection ensures that the gloves can resist increasing the inner temperature by more than 24°C for at least 18 seconds during exposure to convective heat. The test method involves exposing the glove to a controlled convective heat source, such as heated air or steam, and measuring how long it takes for the temperature inside the glove to reach the set increase. Gloves that achieve Level 4 are ideal for intense settings where exposure to sustained or high levels of convective heat is common, such as firefighting, handling hot gases, or working in industrial environments with steam or hot air emissions. This level of protection is critical for ensuring safety and reducing the risk of burns in environments with high heat hazards.
Molten Metal Resistance Level 1EN 407:2020 is a European standard that sets the performance requirements for protective gloves intended to safeguard against thermal risks, including resistance to molten metal splashes. Molten Metal Resistance Level 1 indicates the lowest level of protection under this standard, where gloves are tested to withstand minimal exposure to molten metal. This test result implies that the gloves can handle at least 30 grams of molten iron without the metal penetrating the material and causing harm to the user. The testing method involves pouring a specified amount of molten metal on the glove and measuring how the glove material responds, particularly whether the molten metal sticks or penetrates through to the inside. Gloves achieving Level 1 are suitable for light industrial tasks where there is a low risk of exposure to small quantities of molten metal, providing basic protection and allowing workers to perform safely in environments like light metal fabrication or when handling materials close to molten metal under controlled conditions.
Radiant Heat Level 3EN 407:2020 is a European standard that outlines the performance requirements for protective gloves intended to shield against various thermal risks, including radiant heat. Radiant Heat Level 3 signifies a higher degree of protection, indicating that the gloves are designed to effectively delay significant heat transfer from a radiant source. This level ensures that the gloves can protect the wearer for a minimum of 50 seconds before the temperature inside the glove increases. The test method involves exposing the glove to a controlled source of radiant heat and measuring the duration it takes for the heat to penetrate through the glove material to the point where it increases the inner temperature to a defined threshold. Gloves achieving Level 3 protection are suitable for more intense radiant heat environments, such as those found in steel mills, glass handling, and other industrial settings where substantial exposure to high levels of radiant heat occurs regularly. This enhanced protection is critical for maintaining safety and preventing thermal burns during prolonged exposure to high temperatures.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.
F W Burmann delivery terms
Free delivery when you order more than 10 000,00 kr from F W Burmann
Supplier shipping fee 1 500,00 kr
Brand minimum 5 000,00 kr
Ulith® Safety 805407 Fire Protector Work Gloves, Size 10, Grey/Beige, 12 pairs
8 110,00 kr / carton (VAT incl.)
6 488,00 kr
carton VAT 0%
A carton contains 10 packages (120 pairs)
54,07 kr / pair
In a package
12 pairs
In a carton
10 packages
120 pairs
On a pallet
10 cartons
1 200 pair
F W Burmann
Delivery time: 5 business days
Orders from 5 000,00 €
Supplier shipping fee 1 500,00 €
Free shipping on orders over 10 000,00 €
Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
Recommended products
List products you’re looking for and we’ll find the best products and prices for you – all for free.
We’ll help you find the right products and pricing for your business - all for free.
Product expert / ---