TEGERA Leather Glove 7780
Product description
TEGERA® 7780, Heat resistant glove, full lining, 1.0 - 1.1 mm cowhide, cut resistant class C, Cat. III, resistant to contact heat up to 250°C, heat resistant stitching, reinforced seams, reinforced thumb, universal stitching
Enhances glove lifespan with added material and stitching at the thumb base. Provides increased durability in this high-stress, wear-prone area.
Suited for various tasks, these gloves offer essential protection and flexibility. A practical choice providing comfort and durability for everyday use.
Provides complete hand coverage, shielding fingers from hazards. Offers maximum protection and warmth, ideal for demanding tasks and environments.
The design of the wrist area that secures the glove and prevents debris entry. Different styles offer varying levels of adjustability, protection, and comfort.
Identifies the primary substances used in glove construction that determine protection level, comfort, grip strength, and resistance to specific workplace hazards.
- Hand Protection
- Cut Resistant
- Heat & Flame Resistance
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.
Test results
Cut Resistance, ISO 13997 Level XThe standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed.
Puncture Resistance Level 3The European Norm (EN) 388:2016 standard includes guidelines for assessing the puncture resistance of gloves, where a Puncture Resistance result of Level 3 signifies that the glove material can withstand a force of between 100 to 149 Newtons before being punctured. This result is crucial for ensuring that gloves provide an adequate level of protection against punctures when used in moderate risk environments, offering users safety from potentially harmful sharp objects. The test procedure for determining this metric involves measuring the amount of force required to puncture the glove using a standard-sized stylus. The stylus is pressed against the glove material at a constant speed until a puncture occurs. The weight needed to achieve the puncture is then recorded as the glove's puncture resistance level. For procurement professionals, this result implies that gloves rated at this level are suitable for tasks where there is a significant risk of encountering puncturing hazards, such as handling building materials, waste management, or assembly line work involving mid-level sharp objects.
Tear Resistance Level 3EN 388:2016 is a European standard that specifies methods for testing the resistance of protective gloves against mechanical hazards, such as abrasion, cuts, punctures, and tearing. The Tear Resistance Level 3 indicates a high level of protection, where the gloves can withstand significant tearing forces. The test for determining tear resistance involves subjecting the glove material to a mechanical force until it tears, measuring the force required to initiate and continue the tear. For Level 3, gloves must withstand a force between 50 to 75 Newtons before tearing. This robust level of tear resistance is particularly suitable for demanding environments where gloves are exposed to activities that might cause extensive wear or tearing, such as handling heavy or rough materials, industrial assembly, and construction tasks. Gloves with this level of tear resistance provide enhanced durability and safety, reducing the risk of injuries and increasing the longevity of the glove in tough working conditions.
Abrasion Resistance Level 3EN 388:2016 is a European standard that provides guidelines for assessing the protection levels of gloves against mechanical risks, such as abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 3 indicates a higher level of protection, signifying that the gloves can resist more intensive wear from rough materials. According to the standard, the abrasion resistance test involves rubbing the glove material against sandpaper under a specified pressure until it is worn through. Level 3 abrasion resistance requires that the gloves withstand 2000 to 7999 cycles of abrasion. This enhanced level of durability is appropriate for tasks involving more frequent or more intense contact with abrasive surfaces, such as construction work, woodworking, and handling building materials. Gloves with Level 3 abrasion resistance offer a robust barrier against wear, extending glove life and providing increased protection for the wearer’s hands, thus reducing the risk of injuries in more demanding work environments.
EN ISO 21420:2020 is a European standard that sets out the general requirements for hand protection, including comfort, fit, and dexterity.
EN 407:2004 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:1994 and it's intended to protect the users against thermal risks, such as heat and flame, and to help them to choose a suitable glove for their specific application.
Test results
Heat Contact Level 2The standard EN 407:2004 concerns Protective gloves against thermal risks (heat and/or fire) and includes a range of prescribed thermal tests, each designed to assess specific properties of safety gloves intended for various heat-related applications. The test result labeled Heat Contact Level 2 specifically evaluates the thermal insulation capacity of the glove material. A glove that achieves Level 2 has exhibited sufficient insulation to delay a temperature rise of 250°C for at least 15 seconds when its surface is in contact with a heated probe. This test involves placing the glove material against a hot probe of defined dimensions and temperature while monitoring temperature changes with a calorimeter embedded inside the glove to measure the rate at which the inner temperature rises. A Level 2 performance rating informs procurement professionals that the glove offers moderate protection against contact heat, suitable for environments or tasks where brief contact with moderately hot surfaces could occur, but where extensive or prolonged exposure does not exist. This ensures adequate protection for scenarios requiring such specific levels of thermal resistance without being over-specced for less demanding conditions.
Heat Convection Level 4For Heat Convection Level 4 under EN 407:2004, this indicates the highest level of protection that protective gloves can offer against convective heat, which involves heat transfer through hot gases or liquids. To qualify for Level 4 in convective heat protection, gloves must demonstrate significant resistance to heat transfer. Specifically, gloves at this level are required to delay an increase in internal temperature by no more than 24°C for at least 18 seconds during exposure to convective heat. This makes them highly effective for use in environments where there is substantial exposure to high levels of heat from gases or steam, providing a much higher level of safety for handling or working near hot substances for extended periods.
Metal Splash Resistance Level 4EN 407:2004 is a European standard focused on assessing the protective capabilities of gloves against thermal risks, including hazards such as molten metal splashes. Metal Splash Resistance Level 4 represents an advanced level of protection, where the gloves are designed to handle substantial exposure to molten metal. This performance level signifies that the gloves can effectively resist at least 35 droplets of molten metal, protecting the wearer without the metal penetrating the glove material significantly. The testing involves simulating conditions where molten metal is splashed onto the glove, assessing the glove's ability to prevent molten metal from sticking and causing burns. Gloves that achieve Level 4 are ideal for heavy industrial applications such as steel mills, foundries, and welding, where frequent and substantial contact with molten metal occurs. This level of protection is crucial for maintaining safety and preventing serious injuries in environments with high thermal risks.
Molten Metal Resistance Level 4EN 407:2004 is a European standard that sets performance criteria for protective gloves to safeguard against thermal risks, including the extreme conditions posed by molten metals. Molten Metal Resistance Level 4 indicates the highest level of protection available under this standard, meaning the gloves can effectively withstand substantial amounts of molten metal without penetration that could lead to burns or other injuries. This level signifies that the gloves can handle at least 200 grams of molten iron, ensuring that the metal does not penetrate through the glove material during testing. The test involves pouring this quantity of molten iron onto the glove and evaluating its capacity to prevent the molten metal from reaching the skin. Gloves meeting Level 4 are essential for extreme industrial environments, such as those in heavy foundries, cast iron manufacturing, and other sectors where workers are regularly exposed to high volumes of molten metal. This robust level of protection is critical for ensuring the highest safety standards, helping to prevent serious injuries in some of the most hazardous work conditions.
Radiant Heat Level 3EN 407:2004 is a European standard that outlines the performance requirements for protective gloves intended to shield against various thermal risks, including radiant heat. Radiant Heat Level 3 signifies a higher degree of protection, indicating that the gloves are designed to effectively delay significant heat transfer from a radiant source. This level ensures that the gloves can protect the wearer for a minimum of 50 seconds before the temperature inside the glove increases. The test method involves exposing the glove to a controlled source of radiant heat and measuring the duration it takes for the heat to penetrate through the glove material to the point where it increases the inner temperature to a defined threshold. Gloves achieving Level 3 protection are suitable for more intense radiant heat environments, such as those found in steel mills, glass handling, and other industrial settings where substantial exposure to high levels of radiant heat occurs regularly. This enhanced protection is critical for maintaining safety and preventing thermal burns during prolonged exposure to high temperatures.
Burning Behaviour Level 4Level 4 requires the material to have an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds after exposure to flame. This level offers substantial protection for handling or exposure to fire, suitable for environments where there is a significant risk of intense and immediate contact with flames.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.
Ejendals delivery terms
Free delivery when you order more than 150,00 € from Ejendals
Supplier shipping fee 4,74 €
Brand minimum 0,00 €
33,22 €
Price per pair
33,22 € / pair
Other products you may like
Similar products you may like
Recommended for you
Ejendals
Delivery time: 2 business days
Supplier shipping fee 4,74 €
Free shipping on orders over 150,00 €



Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
List products you’re looking for and we’ll find the best products and prices for you – all for free.
--- / Customer service