TEGERA Leather Glove 126A

Standards and labels

• EN 388:2016

  EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

  Test results

  Cut Resistance, Coup Test Level 1

  The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.

  Abrasion Resistance Level 2

  EN 388:2016 is an updated European standard that specifies criteria for testing gloves to protect against mechanical risks, including abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 2 classification within this standard indicates a moderate level of protection against wear from rough materials. The abrasion resistance test involves subjecting the glove material to repeated cycles of sandpaper under pressure until the material wears through. Level 2 abrasion resistance means the gloves can withstand between 500 to 1999 cycles before being penetrated. This level of protection is suitable for tasks that involve handling or coming into contact with abrasive materials but not at an extreme or heavy-duty level. Gloves with Level 2 abrasion resistance are well-suited for general handling tasks, offering durability and protection to extend the life of the glove while maintaining good dexterity and comfort.

  Tear Resistance Level 1

  EN 388:2016 is a European standard that outlines the testing requirements for gloves to determine their level of protection against mechanical hazards, including tear resistance. The Tear Resistance Level 1 classification signifies that the gloves offer basic protection against tearing. The test method involves applying a force to a sample of the glove material to tear it, and the force measured reflects the glove's ability to resist tearing. Level 1 tear resistance means the gloves can withstand a force of between 10 to 25 Newtons before tearing. This basic level of protection is suitable for tasks where there is a minimal risk of tearing due to light manual handling or where gloves are used to prevent scratches or minor abrasions. Gloves with Level 1 tear resistance are appropriate for general activities that do not involve handling sharp or jagged materials.

  Puncture Resistance Level 1

  The European standard EN 388:2016 addresses the puncture resistance of protective gloves, with puncture resistance classified from Levels 1 to 4. Specifically, a Level 1 result indicates minimal puncture resistance. This level of resistance is determined by a test involving a standardized stylus with a specified diameter and force. During the test, the stylus is pressed against the material with a force up to 20 Newtons to assess how well the glove can withstand penetration. A Level 1 rating signifies that the glove provides basic protection against small punctures or stabs, appropriate for areas with minimal risk. Practical implications for this test result suggest the gloves are suitable for light tasks where major risks of punctures are not anticipated, but are not adequate for handling sharp tools or heavy equipment where higher penetration resistance would be necessary.

  Cut Resistance, ISO 13997 Level X

  The standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed.

• EN 1149-2:1997

  EN 1149-2:1997 is a standard for electrical arc protection for protective clothing. It establishes performance requirements for materials and garments used in protective clothing to protect against electrical arcs. The standard includes tests for measuring the arc resistance, material flammability, and garment construction. Possible test results include pass/fail for each of these categories.

  Test results

  Performance Tested

  The EN 1149-2:1997 standard is designed to assess the electrostatic properties of protective clothing, specifically measuring the electrical resistance through a material, referred to as vertical resistance. Evaluating the test result involves determining how well the protective fabric can prevent a build-up of static electricity, which is vital for safety in environments where electrical discharges could pose a fire or explosion risk. The test method includes applying a voltage across a fabric sample while it is sandwiched between two electrodes, and the resistance is measured at both high and low voltage levels to ensure accuracy. Businesses must consider this result when selecting protective clothing for environments with potential electrical hazards, ensuring that the material has adequate resistance to prevent static electricity build-up and provide a safeguard against electrostatic discharges in volatile work conditions.

• EN 407:2004

  EN 407:2004 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:1994 and it's intended to protect the users against thermal risks, such as heat and flame, and to help them to choose a suitable glove for their specific application.

  Test results

  Molten Metal Resistance Level X

  EN 407:2004 is a European standard that provides specifications for protective gloves to safeguard against thermal risks, including the exposure to molten metals. The designation Molten Metal Resistance Level X indicates that the gloves have not been tested for this specific risk, or they failed to meet the minimum requirements set out in the standard for protection against molten metal splashes. This means that the gloves are either unsuitable for use in environments where there is a risk of contact with molten metals, or additional testing is required to determine their suitability. Typically, such a classification implies that the gloves should not be used for handling molten metals and should only be considered for other types of thermal risks specified in the standard, where molten metal exposure is not a concern. This classification helps in ensuring that users select the right type of glove based on the specific hazards present in their working environment, thereby preventing inappropriate use and enhancing safety.

  Heat Contact Level 1

  The standard EN 407:2004 on Protective gloves against thermal risks, including the testing for contact heat at Level 1, is designed to assess the protection level of gloves when exposed to thermal hazards. A Level 1 result on the contact heat resistance indicates basic protection where the glove can delay the transfer of heat from a contact source at 100°C for at least 15 seconds before the inside of the glove reaches a temperature increase of 10°C. The test method involves placing the outer surface of the glove in contact with a hot probe of defined dimensions and temperature, while the rate of temperature rise of a calorimeter on the inside of the glove is measured. This measurement provides a straightforward metric for assessing the thermal protection offered by the glove at low-level exposure. Practically, gloves rated at Level 1 for contact heat are suitable for environments where exposure to thermal risks is minimal and not excessively severe, making them adequate for certain low-risk industrial, laboratory, or handling applications where brief contact with warm objects is common.

  Radiant Heat Level X

  EN 407:2004 is a European standard that sets the requirements for protective gloves to defend against various thermal hazards, including radiant heat. The designation Radiant Heat Level X indicates that the gloves have not been tested for this specific type of protection, or they did not meet the minimum criteria established by the standard for resisting radiant heat. This means that these gloves are not certified for protection against radiant heat, which involves the transmission of heat through infrared rays from a heat source without direct contact. The lack of a specific radiant heat protection level suggests that users should not rely on these gloves for tasks where significant exposure to radiant heat is expected. Instead, these gloves might be suitable for other types of thermal risks for which they are certified, ensuring users select the appropriate type of protective glove based on the specific hazards present in their working environment. This classification assists in preventing inappropriate glove use and enhancing worker safety by clearly indicating the limitations of the glove's protective capabilities.

  Heat Convection Level 2

  The EN 407:2004 standard, specifically concerning Heat Convection result at Level 2, measures the performance of protective gloves against heat and/or fire. With a Level 2 convection heat test result, it indicates that the gloves have a moderate level of protection against heat transferred through convection. This result correlates to an exposure to convective heat at a predefined level, which in Level 2 typically offers thermal resistance for a minimum of 5 seconds before the glove’s inner temperature increases by 24°C. The test method used involves circulating hot air around the glove, and measuring the time taken for the temperature inside the glove to rise by a specific amount (typically 24°C). This result is crucial for professionals working in environments where moderate exposure to convective heat is expected, helping them choose gloves that provide adequate protection while ensuring usability and dexterity. Such protective gloves are generally used in industries like industrial baking, glass operations, and certain chemical processes where hot vapors or similar conditions might pose risks.

  Metal Splash Resistance Level 4

  EN 407:2004 is a European standard focused on assessing the protective capabilities of gloves against thermal risks, including hazards such as molten metal splashes. Metal Splash Resistance Level 4 represents an advanced level of protection, where the gloves are designed to handle substantial exposure to molten metal. This performance level signifies that the gloves can effectively resist at least 35 droplets of molten metal, protecting the wearer without the metal penetrating the glove material significantly. The testing involves simulating conditions where molten metal is splashed onto the glove, assessing the glove's ability to prevent molten metal from sticking and causing burns. Gloves that achieve Level 4 are ideal for heavy industrial applications such as steel mills, foundries, and welding, where frequent and substantial contact with molten metal occurs. This level of protection is crucial for maintaining safety and preventing serious injuries in environments with high thermal risks.

  Burning Behaviour Level 4

  Level 4 requires the material to have an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds after exposure to flame. This level offers substantial protection for handling or exposure to fire, suitable for environments where there is a significant risk of intense and immediate contact with flames.

• EN 420:2003+A1:2009

  EN 420:2003+A1:2009 is a European standard that sets out the general requirements for hand protection, including comfort, fit, and dexterity. Performance requirements include resistance to abrasion, cut, tear, puncture, and impact. Test results should show the gloves meet these requirements.

  Reach out to ask about the standard test results

• EN 12477:2001/A1:2005

  EN 12477:2001, along with the amendment A1:2005, is a European standard that specifically addresses protective gloves for welders. The standard sets requirements and test methods for gloves designed to protect the hands and forearms from heat and splatter during welding operations. The amendment A1:2005 introduces updates and refinements to enhance the performance and reliability of the gloves, ensuring improved protection for welders. It may include additional requirements for factors such as dexterity, grip, and durability. Compliance with EN 12477:2001 and its amendment ensures that welders have appropriate gloves that meet the necessary safety standards.

  Reach out to ask about the standard test results

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.