BizTex SMS FR Coverall Type 5/6, White

Standards and labels

• EN 13034:2005+A1:2009

  Protective clothing with the EN 13034:2005+A1:2009 rating is tested for limited protection against liquid chemicals, such as light spray or splashes. This ensures the garment resists chemical penetration and repellency, allowing you to work safely with low-risk chemical exposure and remove it quickly if contaminated.

  Test results

  Liquid Chemical Protection Type 6

  This garment offers protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is designed for low-risk situations where a full chemical barrier is not needed and you can act if contaminated.

• EN 1149-5

  Protective clothing with the EN 1149-5 rating is tested for its ability to dissipate electrostatic charges, preventing sparks. This protects you by reducing the risk of explosions in hazardous environments where flammable substances or gases are present.

  Reach out to ask about the standard test results

• EN ISO 14116:2015

  Protective clothing and materials with the EN ISO 14116:2015 rating are tested for limited flame spread properties, checking if they self-extinguish after brief contact with a small flame. This means the garment will not continue to burn, reducing the risk of injury for the wearer.

  Test results

  Flame Spread Test Index 1

  This material reduces the risk of the clothing burning from brief, accidental contact with small flames. It limits flame spread, but should not be worn next to the skin and must be used over other flame-resistant garments.

• EN 1073-2

  Protective clothing with the EN 1073-2 rating is tested for protection against particulate radioactive contamination, including the material's resistance to particle penetration and inward leakage. This ensures the clothing forms a reliable barrier, helping to prevent radioactive particles from contacting your skin or clothes.

  Reach out to ask about the standard test results

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.