Standards and labels

• EN 14126:1999

  EN 14126:1999 is a European standard that sets guidelines for the protection of medical clothing against infective agents. It specifies the minimum requirements for the protection of medical clothing, including the material properties, design, and construction of the clothing. Testing includes things like barrier resistance, penetration resistance and filtration efficiency. Possible test results would include pass or fail based on whether the clothing meets the safety and performance requirements outlined in the standard.

  Reach out to ask about the standard test results

• EN 1149-1:2006

  EN 1149-1:2006 is a European standard that specifies the requirements for electrostatic discharge (ESD) protective clothing. The standard defines the performance requirements for material, design, and testing of ESD clothing. The clothing must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance and charge decay of the clothing material. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

  Test results

  Surface Resistance Tested

  The standard EN 1149-1:2006 specifies the methodology to measure surface resistance in order to assess the electrostatic properties of materials, typically used for protective clothing. A result specifying surface resistance under this standard means the material has been assessed for its ability to dissipate electrostatic charges, which is crucial in environments where electrostatic discharges can be hazardous. The test involves measuring the resistance of the material surface using electrodes to determine if the resistance value is less than 2.5 × 10(9) ohms, which is the threshold for compliance. This threshold ensures that the material can effectively dissipate electrostatic charges, thereby enhancing safety in electrostatic-sensitive environments. For procurement professionals, understanding that a product meets this standard indicates suitability for use in applications where electrostatic discharge poses a risk, such as in electronic assembly or explosive atmospheres.

• EN 1149-5:2008

  EN 1149-5:2008 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. The standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

  Test results

  Material Performance Tested

  The EN 1149-5:2008 standard specifies the performance requirements for material used in protective clothing designed to avoid incendiary discharges. The test result Tested means that the material has undergone relevant evaluation procedures to confirm its static dissipative properties. These tests generally involve measuring the electrical resistance of the material in ohms (Ω) to determine its capability to dissipate electrostatic charges and prevent sparking that could ignite flammable substances. The practical implications of this result for the respective product category (like protective workwear for use in explosive atmospheres) are significant, as it ensures that the clothing provides a level of protection against electrostatic discharges, potentially reducing the risk of fire or explosion in environments with flammable gases, vapors, or dusts.

• EN 13034:2005

  EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.

  Test results

  Liquid Chemical Protection Type 6 PB

  EN 13034:2005 specifies the performance requirements for protective clothing that offers limited protection against liquid chemicals, identified specifically as Type 6 PB (partial body protection). The 'Type 6 PB' designation implies that the protective garment has been tested and confirmed to provide effective defense against light spray and minor splashes of liquid chemicals, but only for parts of the body such as aprons, sleeves, or boots rather than full body suits. This standard tests the fabric's barrier effectiveness by applying a defined volume of liquid to the garment and assessing any penetration or repellence under controlled laboratory conditions. Garments achieving Type 6 PB classification are crucial for tasks in industries like chemical processing or handling where full body coverage is unnecessary, thereby offering flexibility and targeted protection, reducing the risk of chemical exposure to critical areas of the body.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.