Product description
This Cut Resistant Thermal Glove has an added layer of TPR for maximum impact resistance and high flexibility. The nitrile micro foam palm gives superior grip and protection against liquids and water penetration. Ergonomic design for optimised comfort. EN ISO 21420: 2020 Dexterity 3, EN 388: 2016 + A1: 2018 (4X42CP), EN 511: 2006 (X2X), ANSI/ISEA 105: 2016 CUT Level (A4), ANSI/ISEA 138 Level 2
- Cold Protective
- Cut Resistant
- Impact Resistance
- Hand Protection
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN ISO 21420:2020 is a European standard that sets out the general requirements for hand protection, including comfort, fit, and dexterity.
EN 511:2006 is a European standard that sets requirements for the protection against cold for gloves and mittens. It covers factors such as resistance to cold, water penetration and breathability. Testing must be done by a certified lab and must show that the product meets all requirements of the standard. Possible test results would include pass/fail for each requirement, as well as specific measurement data.
Test results
Cold Contact Level 2The standard EN 511:2006 specifies requirements for protective gloves that guard against cold environments. Cold Contact result Level 2 indicates moderate insulation against contact cold, quantified with a thermal resistance measurement in the range of 0.050 to less than 0.100 m²°C/W. This means gloves achieving this level can provide a reasonable amount of insulation, helping to reduce heat transfer from the hands to the cold contact surface, thereby lowering the rate at which hands become cold. The measurement of contact cold resistance is performed using a standardized test that involves placing the glove materials against metal plates cooled to different temperatures. The difference in temperature across the glove material is then analyzed to determine its thermal resistance. For practical implications, gloves classified under Level 2 of Cold Contact in EN 511:2006 are suitable for environments or tasks where individuals are exposed to cold objects but do not necessarily involve extreme cold or extended exposure, offering a balance between dexterity and protection from the cold .
Water Tightness Level XThe standard EN 511:2006 defines the requirements for protective gloves against cold. The reference to a Water Tightness Level X in this standard typically indicates that the glove has not been tested for water tightness. Water tightness is assessed through a specific test method where the gloves are subjected to water exposure under controlled conditions to check for leakage. The gloves are filled with water and then inspected visually to determine the presence of any water leakage. The practical implications of a Level X result for water tightness suggest that the gloves are either not designed to be waterproof or they failed to meet the minimum criteria for being labeled as water-resistant under normal usage conditions. This information is important for procurement professionals focusing specifically on the need for water-resistant or waterproof protective gloves.
Convective Cold Level XThe EN 511:2006 standard specifies the requirements for protective gloves against cold, including convective cold. A specific test result of Level X under this standard generally implies that the gloves have not been measured for that specific level of protection against convective cold or did not meet the criteria to be rated at a discernible level; hence, information regarding the protection it could offer at Level X is not provided. The Convective Cold Test involved in EN 511:2006 measures the thermal insulation of gloves when exposed to cold air. This test uses an electrically heated hand model, and the power required to maintain the hand's temperature gives an indication of the glove's insulation effectiveness. The test environment is controlled with progressive cooling, and measurements are taken to assess the insulation level, categorized from Level 1 upwards. The higher the level, the greater the cold insulation offered by the glove, enabling professionals in cold environments to select gloves based on the specific insulation requirements of their workplace activities .
EN 388:2016+A1:2018 is a European standard that defines the requirements and test methods for safety gloves used in general mechanical risks. The standard specifies the requirements for the resistance against abrasion, cut, tear, puncture, and impact. Test results for EN 388:2016+A1:2018 include measurements of abrasion resistance, cut resistance, tear resistance, puncture resistance, and impact resistance. The standard is intended to ensure that safety gloves used in general mechanical risks provide adequate protection for the user.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
Portwest delivery terms
Free delivery when you order more than 360,00 € from Portwest
Supplier shipping fee 15,00 €
Brand minimum 0,00 €
Portwest A729G8R Anti Impact Cut Resistant Thermal Glove
17,47 € / pair (VAT incl.)
13,92 €
pair VAT 0%
Sold in units of one pair
13,92 € / pair
In a package
12 pairs
In a carton
6 packages
72 pairs
Portwest
Delivery time: 5 business days
Supplier shipping fee 15,00 €
Free shipping on orders over 360,00 €
Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
Recommended products
List products you’re looking for and we’ll find the best products and prices for you – all for free.
We’ll help you find the right products and pricing for your business - all for free.
Product expert / ---