Standards and labels

• EN 455-1:2000

  Medical gloves with the EN 455-1:2000 rating are tested for freedom from holes, primarily using a water leak test. This ensures the gloves provide a reliable, intact barrier, protecting both the user and patient from cross-contamination during medical procedures.

  Reach out to ask about the standard test results

• EN 374-4:2013

  Protective gloves with the EN 374-4:2013 rating are tested for their resistance to degradation by chemicals. This measures changes in the glove material, like swelling or hardening, ensuring the glove maintains its protective qualities when exposed to hazardous substances.

  Reach out to ask about the standard test results

• EN ISO 374-1:2016/A1:2018

  Protective gloves with the EN ISO 374-1:2016/A1:2018 rating are tested for resistance against dangerous chemical penetration, permeation, and degradation. This means the gloves are proven to protect your hands from hazardous substances and indicate how long they can withstand contact with specific chemicals.

  Test results

  Specified Requirements Type B

  This glove provides protection against chemical splashes, resisting permeation for at least 30 minutes for a minimum of three specific chemicals. It is suitable for tasks involving handling certain chemicals where moderate contact is expected.

• EN ISO 374-5:2016

  Gloves with the EN ISO 374-5:2016 rating are tested for resistance to penetration by microorganisms like bacteria, fungi, and viruses. This ensures the gloves provide a protective barrier, helping to shield you from harmful germs and potential infections.

  Reach out to ask about the standard test results

• EN 374-2:2014

  Gloves with the EN 374-2:2014 rating are tested for their resistance to penetration, ensuring liquids and microorganisms do not leak through tiny holes or imperfections. This means the gloves provide an effective barrier, protecting your hands from direct contact with hazardous chemicals and microbes.

  Test results

  Penetration Resistance Tested

  This product has passed a leak test to ensure it is a waterproof and effective barrier against liquids, bacteria, and fungi. This protects your hands from contact with harmful microorganisms in various work environments.

• EN 420:2003+A1:2009

  Protective gloves with the EN 420:2003+A1:2009 rating are tested for general design, safe materials (innocuousness), water penetration, comfort, and dexterity. This ensures the gloves are safe, fit correctly, and allow you to perform tasks effectively without discomfort.

  Reach out to ask about the standard test results

• EN 14971

  Medical devices with the EN 14971 rating are tested for potential hazards and associated risks throughout their entire lifecycle. This means manufacturers have systematically identified and reduced possible dangers, ensuring the products are safer for you to use.

  Reach out to ask about the standard test results

• EN 455-3:2015

  Medical gloves with the EN 455-3:2015 rating are tested for biological safety, including protein, endotoxin, chemical, and powder content. This ensures the gloves are safe for use, reducing risks of allergic reactions and irritation for consumers.

  Reach out to ask about the standard test results

• ISO 13485:2016

  Medical devices with the ISO 13485:2016 rating are tested for a quality management system that ensures consistent safety, quality, and regulatory compliance throughout their lifecycle. This provides assurance that the product is reliably produced to high international standards for patient use.

  Reach out to ask about the standard test results

• EN 455-2:2015

  Single-use medical gloves with the EN 455-2:2015 rating are tested for physical properties like dimensions and strength. This ensures gloves fit correctly and are strong enough to provide reliable protection without tearing during use.

  Reach out to ask about the standard test results

• EN 455-4:2009

  Single-use medical gloves with the EN 455-4:2009 rating are tested for their shelf life, ensuring they maintain properties like strength and barrier integrity over time. This means the gloves will remain effective and safe, providing reliable protection against infections until their expiration date when stored correctly.

  Reach out to ask about the standard test results

• Food Safe

  Food safe refers to the safety of food products that are used or consumed by people. In Europe, food safety is regulated by the European Union (EU) and the European Food Safety Authority (EFSA). These organizations set standards and requirements for food products to ensure they are safe to eat. To be considered "food safe" in Europe, a product must meet these standards and be free of harmful substances. This includes being free of harmful bacteria, pesticides, and other contaminants. Food products that do not meet these standards cannot be sold or used in the EU.

• MD Label

  MD stands for "Medical Device." It refers to any instruments, apparatus, machines, implants, or other similar or related articles that are intended to be used for human beings for the purpose of diagnosis, prevention, monitoring, treatment or alleviation of disease, injury or disability. In Europe, a MD Label is a special label that must be on all Medical Devices that are sold or used in the European Union (EU). The label must include information about the product, such as the name of the manufacturer, the intended use of the product and CE mark. To be able to sell or use a Medical Device in the EU, the device must meet certain standards and requirements set by the European Union and notified body.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.