Over 12,000 satisfied customersKask Plasma Mesh Visor / Verkkovisiiri
Product description
Lightweight and quick-release mesh full facepiece for Kask Plasma series helmets. Thanks to the special hexagonal metal mesh, excellent light transmission (82 - 86.5%), providing safety and efficiency for working even in low light conditions, and high resistance to mechanical hazards.
Protects eyes and face from flying wood splinters, chips, coarse dust and flying metal particles. Recommended choice for loggers, arborists and various woodworking applications. The curved design provides a wide field of vision and the net comes close to the face, making it comfortable to use.
In addition to the face part, attachment parts must be purchased. See below. Attachment and removal is then tool-free.
Two positions. Weight 42 g. Certification: CE EN 1731, EN 166 class F (=protection against low energy mechanical hazards (6 mm 0,86 g metal ball 45 m/s), ANSI Z87.1., CA Z94.3.
Maximum life 10 years. Warranty against defects in material and workmanship 3 years.
For a mesh visor for the Kask Plasma series helmet, order either of the following product combinations:
WAC00003- Plasma hearing protection adapters
WAC00008- Plasma Mesh Visor Carrier bracket pair
WVI00005- Plasma Mesh Visor Carrier top frame with stems
WVI00006- Plasma Mesh Visor mesh visor
OR
One of the three hearing protector models:
WHP00004- SC1 hearing protectors green
WHP00005- SC2 hearing protectors yellow
WHP00006- SC3 hearing protectors orange
And attached to them:
WAC00003- Plasma hearing protector adapters
WVI00005- Plasma Mesh Visor Carrier upper frame with stems
WVI00006- Plasma Mesh Visor mesh visor
Compatibility with Kask work helmets:
Plasma AQ
Plasma HI VIZ
Superplasma PL
Superplasma PL HI VIZ
Helitalk
HP (High Performance)
HP CRI
We recommend the following products for use with Mesh Visor:
Plasma Helmet Neck Protector Grey (WAC00020-)
Plasma helmet neck protector HI VIZ orange (WAC00024-)
Helmet Bag helmet bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag Helmet Bag HI VI VI VI
Government Decree (205/2009) on safety in construction work, Chapter 13 § 71: Safety helmets must be worn on construction sites. If necessary, the helmet must be equipped with a hood. In construction work, personal eye protection must be worn as required by the work and working conditions. The employer must provide workers with safety goggles for work where there is a significant risk of eye injury.
Indicates the primary substance used in construction, determining critical protective properties like chemical resistance, heat protection, durability, and comfort during wear.
- Eye Protection
- Replacement part
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
Test results
Mechanical Strength FEN 166:1995 is a standard that specifies requirements for personal eye protection in various environments, focusing on the durability and safety of eyewear. The 'Mechanical Strength F' designation indicates that the eyewear has been tested and certified to withstand low-energy impact, specifically able to resist a 6 mm, 0.86 g ball traveling at 45 meters per second. This test involves firing the ball at the protective eyewear to ensure it can protect the wearer's eyes from such impacts without breaking or causing injury. Eyewear meeting the 'F' result is suitable for use in environments where there is a risk of smaller, slower-moving projectiles, such as in woodworking, light manufacturing, and general laboratory work. This level of protection helps prevent eye injuries from low-energy impacts, enhancing safety for individuals in these settings.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
KASK delivery terms
Free delivery when you order more than 150,00 € from KASK
Supplier shipping fee 4,74 €
Brand minimum 0,00 €
35,12 €
Price per piece
35,12 € / piece
Other products you may like
Similar products you may like
Recommended for you
KASK
Delivery time: 3 business days
Supplier shipping fee 4,74 €
Free shipping on orders over 150,00 €
Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
List products you’re looking for and we’ll find the best products and prices for you – all for free.
--- / Customer service