Hand1A Basic Unlined Cowhide Welding Gloves

Standards and labels

• EN 12477

  Reach out to ask about the standard test results

• EN 388:2016

  EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

  Test results

  Abrasion Resistance Level 3

  EN 388:2016 is a European standard that provides guidelines for assessing the protection levels of gloves against mechanical risks, such as abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 3 indicates a higher level of protection, signifying that the gloves can resist more intensive wear from rough materials. According to the standard, the abrasion resistance test involves rubbing the glove material against sandpaper under a specified pressure until it is worn through. Level 3 abrasion resistance requires that the gloves withstand 2000 to 7999 cycles of abrasion. This enhanced level of durability is appropriate for tasks involving more frequent or more intense contact with abrasive surfaces, such as construction work, woodworking, and handling building materials. Gloves with Level 3 abrasion resistance offer a robust barrier against wear, extending glove life and providing increased protection for the wearer’s hands, thus reducing the risk of injuries in more demanding work environments.

  Tear Resistance Level 3

  EN 388:2016 is a European standard that specifies methods for testing the resistance of protective gloves against mechanical hazards, such as abrasion, cuts, punctures, and tearing. The Tear Resistance Level 3 indicates a high level of protection, where the gloves can withstand significant tearing forces. The test for determining tear resistance involves subjecting the glove material to a mechanical force until it tears, measuring the force required to initiate and continue the tear. For Level 3, gloves must withstand a force between 50 to 75 Newtons before tearing. This robust level of tear resistance is particularly suitable for demanding environments where gloves are exposed to activities that might cause extensive wear or tearing, such as handling heavy or rough materials, industrial assembly, and construction tasks. Gloves with this level of tear resistance provide enhanced durability and safety, reducing the risk of injuries and increasing the longevity of the glove in tough working conditions.

  Cut Resistance, Coup Test Level 1

  The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.

  Puncture Resistance Level 3

  The European Norm (EN) 388:2016 standard includes guidelines for assessing the puncture resistance of gloves, where a Puncture Resistance result of Level 3 signifies that the glove material can withstand a force of between 100 to 149 Newtons before being punctured. This result is crucial for ensuring that gloves provide an adequate level of protection against punctures when used in moderate risk environments, offering users safety from potentially harmful sharp objects. The test procedure for determining this metric involves measuring the amount of force required to puncture the glove using a standard-sized stylus. The stylus is pressed against the glove material at a constant speed until a puncture occurs. The weight needed to achieve the puncture is then recorded as the glove's puncture resistance level. For procurement professionals, this result implies that gloves rated at this level are suitable for tasks where there is a significant risk of encountering puncturing hazards, such as handling building materials, waste management, or assembly line work involving mid-level sharp objects.

  Cut Resistance, ISO 13997 Level X

  The standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed.

• EN 407:2020

  EN 407:2020 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal, and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:2004, it includes new requirements, testing methods and performance levels to ensure that the gloves provide better protection against thermal risks such as heat, fire and molten metal splash.

  Test results

  Burning Behaviour Level 4

  The EN 407:2020 standard specifies the requirements for protective gloves meant to guard against thermal risks like heat and/or fire. For Level 4 in the 2020 update of the standard, gloves must meet stringent requirements following exposure to fire. They should exhibit an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds. This level of protection is crucial for environments with a high risk of exposure to intense and sustained flames, offering maximum safety for the wearer in hazardous conditions.

  Heat Contact Level 1

  EN 407:2020 sets the standard for evaluating the performance of protective gloves against thermal risks. A result of Level 1 for Heat Contact indicates minimal protection, where the glove material can delay the transfer of heat from a surface at 100°C for at least 15 seconds. This test result is established through method EN ISO 12127-1, where a glove sample is exposed to a hot surface at a specified temperature and the time is measured until the glove's interior temperature rises by a certain degree. For procurement professionals, a Level 1 rating suggests suitability for environments with low heat risks, providing brief contact protection that can be crucial for tasks involving occasional, quick contact with warm objects without continuous exposure to high heat.

  Heat Convection Level 4

  EN 407:2020 is an updated European standard that outlines the performance requirements for protective gloves designed to defend against thermal risks, including heat from convection. Heat Convection Level 4 under this standard indicates a high level of protection, meaning the gloves are capable of significantly delaying the transfer of heat from hot gases or liquids. Specifically, Level 4 protection ensures that the gloves can resist increasing the inner temperature by more than 24°C for at least 18 seconds during exposure to convective heat. The test method involves exposing the glove to a controlled convective heat source, such as heated air or steam, and measuring how long it takes for the temperature inside the glove to reach the set increase. Gloves that achieve Level 4 are ideal for intense settings where exposure to sustained or high levels of convective heat is common, such as firefighting, handling hot gases, or working in industrial environments with steam or hot air emissions. This level of protection is critical for ensuring safety and reducing the risk of burns in environments with high heat hazards.

  Metal Splash Resistance Level 3

  EN 407:2020 is a European standard that outlines the performance requirements and test methods for protective gloves designed to shield against thermal risks, such as exposure to molten metal. Metal Splash Resistance Level 3 indicates a high level of protection where the gloves are capable of withstanding molten metal splashes more effectively. This level of performance means that the gloves can resist the penetration and adherence of at least 25 droplets of molten metal, maintaining their integrity and protecting the wearer’s hands. The test involves dripping molten metal onto the glove material to observe the number of droplets it can withstand before the heat penetrates through to the inside of the glove. Gloves meeting Level 3 are suitable for use in environments with significant exposure to molten metal, such as in heavy metal fabrication, foundries, or other settings where larger quantities of molten metal are handled regularly. These gloves provide enhanced safety and are crucial for preventing severe burns and other serious injuries in high-risk thermal environments.

  Molten Metal Resistance Level X

  EN 407:2020 is a European standard that provides specifications for protective gloves to safeguard against thermal risks, including the exposure to molten metals. The designation Molten Metal Resistance Level X indicates that the gloves have not been tested for this specific risk, or they failed to meet the minimum requirements set out in the standard for protection against molten metal splashes. This means that the gloves are either unsuitable for use in environments where there is a risk of contact with molten metals, or additional testing is required to determine their suitability. Typically, such a classification implies that the gloves should not be used for handling molten metals and should only be considered for other types of thermal risks specified in the standard, where molten metal exposure is not a concern. This classification helps in ensuring that users select the right type of glove based on the specific hazards present in their working environment, thereby preventing inappropriate use and enhancing safety.

  Radiant Heat Level X

  EN 407:2020 is a European standard that sets the requirements for protective gloves to defend against various thermal hazards, including radiant heat. The designation Radiant Heat Level X indicates that the gloves have not been tested for this specific type of protection, or they did not meet the minimum criteria established by the standard for resisting radiant heat. This means that these gloves are not certified for protection against radiant heat, which involves the transmission of heat through infrared rays from a heat source without direct contact. The lack of a specific radiant heat protection level suggests that users should not rely on these gloves for tasks where significant exposure to radiant heat is expected. Instead, these gloves might be suitable for other types of thermal risks for which they are certified, ensuring users select the appropriate type of protective glove based on the specific hazards present in their working environment. This classification assists in preventing inappropriate glove use and enhancing worker safety by clearly indicating the limitations of the glove's protective capabilities.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.