Hase Safety Gloves LUMBERJACK Forestry Boot

Standards and labels

• EN ISO 17249:2004

  EN ISO 17249:2004 is a standard that defines the requirements and test methods for protective gloves used in thermal risks protection. It specifies the performance requirements for protection against thermal risks such as contact heat and flame. The requirements include resistance to heat and flame, and freedom from holes. The test results include the level of protection against thermal risks, and the results of visual inspection. It also includes test procedure for gloves and gives guidelines for the selection, care and use of gloves. It gives also the methods for evaluating the thermal risk protection properties of gloves and the performance levels that can be expected. The standard also includes the requirements for labeling and information to be provided by the manufacturers and suppliers of gloves for thermal risks protection.

  Reach out to ask about the standard test results

• EN ISO 20345:2011

  EN ISO 20345:2011 is a rule book for safety shoes and boots worn by people working in construction. It tells how the shoes and boots should be made and tested, to make sure they protect the feet from hazards such as slips and falls. Test results will show how good the shoes and boots are at not slipping, if they can handle water and if they last a long time. The goal of the standard is to make sure that the shoes and boots that construction workers wear keep their feet safe.

  Test results

  General Requirements SB

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.