Galilee Everest Cut protection gloves level 5/D

Standards and labels

• EN 388:2016

  EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

  Test results

  Abrasion Resistance Level 4

  EN 388:2016 uses a specific test method to measure abrasion resistance of safety gloves; the gloves’ material is subjected to sandpaper under pressure to observe the number of cycles needed to wear through the material. Level 4 in this standard indicates that the material withstood 8,000 cycles before a hole was made. Practically, this means that gloves rated at Level 4 for abrasion resistance offer very high resilience against wearing through, making them suitable for tasks involving significant contact with rough surfaces .

  Cut Resistance, Coup Test Level 3

  The standard EN 388:2016 specifies Cut Resistance for protective gloves, among other standards. A result of 'Level 3' on the Coup Test means that the gloves are certified to withstand at least 5 but less than 10 cycles before being penetrated by a blade. This is based on a specific scale from Level 1 to Level 5, where Level 5 offers the highest protection against cuts. The Coup Test involves using a rotating circular blade under a fixed load moving back and forth across the glove material until cut through occurs. The number of cycles the blade can go through before cutting the fabric determines the cut resistance level. In practical terms, a Level 3 rating in cut resistance indicates that the gloves offer suitable protection for activities involving handling of materials with some sharp edges, such as construction or light assembly tasks, providing a balance between dexterity and cut protection. This level is typically recommended for tasks where there is a moderate risk of cuts and slashes.

  Tear Resistance Level 4

  EN 388:2016 is a European standard that establishes criteria for assessing the protection provided by gloves against mechanical hazards, including tear resistance. The Tear Resistance Level 4 classification represents the highest level of tear resistance defined by this standard, indicating that the gloves can withstand the most substantial forces before tearing. According to the testing methodology, gloves are evaluated by measuring the force required to tear a sample of the glove material, with Level 4 requiring a force of over 75 Newtons to initiate and propagate a tear. This high level of tear resistance is ideal for use in environments where gloves are subjected to significant stress and potential damage, such as in heavy industry, construction, and handling of materials with sharp edges. Gloves achieving this level offer superior durability and are essential for ensuring user safety in high-risk mechanical settings, thereby enhancing work efficiency and reducing the frequency of glove replacement.

  Puncture Resistance Level 2

  The standard EN 388:2016 includes an assessment of Puncture Resistance, where Level 2 signifies that the material has met specific criteria for resistance against puncture. The result of Level 2 in puncture resistance means that the protective glove or material can withstand a force of 60 to 100 newtons before being punctured. The test method used involves using a standardized steel puncture probe that is pushed against the material at a specified speed until it pierces through it. In essence, achieving a Level 2 puncture resistance under EN 388:2006 suggests that the protective equipment offers moderate protection against punctures, making it suitable for environments where there is a risk of encountering sharp objects such as needles, but are not excessively sharp or exert very high force.

  Cut Resistance, ISO 13997 Level D

  Cut Resistance according to the ISO 13997 result under the European Standard EN 388:2016 quantifies the level of resistance a material offers against cutting where the required force to cut through the protective material is between 15 and 21 Newtons. This test method involves applying a straight-edge blade under load over the material's surface and determining the load at which the blade cuts through at a standard length of cut. This stringent testing is critical for products like protective gloves or garments, where high cut resistance ensures better safety and durability in environments where sharp objects are handled. Understanding and adhering to this standard helps procure suitable protective gear that meets safety requirements and offers expected protection for specific risk exposures .

• EN 13997:1999

  EN 13997:1999 is a European standard for fire dampers. Fire dampers are devices that are installed in buildings to stop the spread of fire and smoke. The standard tells how these devices should be designed, installed, and checked to make sure they work well. It also tells how well the devices should work during a fire, like how long they can stop fire and smoke from spreading. Test results show if the fire dampers meet the requirements of the standard and work as they should during a fire.

  Test results

  Cut Resistance Level D

  The EN 13997:1999 standard for cut resistance classifies the ability of materials to resist cuts by sharp objects, aiding the assessment of personal protective gear like gloves. A specific level, such as 'Level D', in this standard indicates that the material offers a moderate to high level of resistance, capable of withstanding a force of 15 newtons before being penetrated. The test for determining cut resistance levels according to EN ISO 13997 involves the use of a TDM test device, equipped with a single-use straight blade. The blade is drawn once, horizontally, across the material, and the blade's travel distance after cutting through the fabric is measured. The force exerted is recorded in newtons, marking the material’s level of cut resistance. This test is crucial for items regularly exposed to hazards from sharp objects, ensuring they meet safety requirements and protect users in environments such as metal handling and maintenance work .

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.