Fristads High vis Airtech® Shell Pants Class 2 2515 GTT

Standards and labels

• EN ISO 20471:2013

  EN ISO 20471:2013 is a standard for high visibility clothing worn in certain work environments. It sets guidelines for clothing to make sure people can see the person wearing it well in low light conditions. Test results are used to make sure the clothing meets these rules. The tests include checking the amount of reflective material on the clothing and how well it can be seen from different angles.

  Test results

  Reflective Strip Area Grade 2

• EN 343:2019

  EN 343 is a European standard for protective clothing against bad weather. It says clothes must be waterproof, breathable, and not let water in. It's used to protect workers in different industries like construction and transportation. Tests must show the clothing meets these standards.

  Test results

  Breathability Class 3

  Breathability performance in the category of Class 3 under the standard EN 343:2019 reflects a high level (RET<20) of breathability for protective clothing. This category is designed to provide comfort and prolonged wearability in environments requiring good air permeability through the garment. Specifically, Class 3 is the highest class, indicating excellent breathability properties which are tested and certified to meet stringent regulations for vapor permeability and resistance. The practical implication of a Class 3 breathability result in EN 343:2019 is that the fabric offers superior breathability, making it suitable for use in garments worn in active work or in environments where higher air permeability is necessary to reduce the risk of heat stress and to maintain comfort during extended wear.

  Waterproofness Class 3

  EN 343:2019 is designed to ensure that protective clothing provides specific levels of protection against rain, considering its waterproof capabilities. Class 3 in this standard represents the highest level of waterproofness, indicating that the garment successfully resists a high volume of water penetration (more than 13000 Pascal Pressure units after pre-treatment). The test method used involves simulating wet weather conditions, where the fabric is exposed to varying degrees of water projections and pressures to evaluate its resistance. Fabrics that achieve Class 3 certification tend to have undergone rigorous testing such as high-pressure spray tests or being subject to a controlled volume of water for a defined period. These are particularly relevant for professional use in extremely wet environments where the highest level of water resistance is necessary, providing critical protection in conditions from heavy rain to immersion scenarios. This high classification impacts the practical usability of such clothing in industries such as outdoor work, marine activities, or emergency services where maximum protection from water exposure is critical for safety and performance.

• EN 13688:2013

  EN 13688:2013 is a European standard that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• EN 14404:2004+A1:2010

  EN 14404:2004+A1:2010 is a European standard that sets the rules for chimneys made of clay. The standard explains how the chimneys should be made, how strong and durable they must be, and how they should be tested to make sure they meet these rules. The amendment A1:2010 includes additional requirements for the performance of chimneys and additional test methods to check the performance of the chimneys. Possible test results include measurements of strength, stretchiness, and how well the chimneys resist fire. The standard helps make sure chimneys made of clay are safe to use.

  Reach out to ask about the standard test results

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.