PRO FIT Heat Protection Glove, Sebatan Leather, Size 10

Standards and labels

• EN 12477:2001

  EN 12477:2001 is a European standard that focuses on protective gloves for welders. It specifies the requirements and test methods for gloves intended to protect the hands and forearms of welders against heat and splatter. The standard outlines criteria for thermal performance, resistance to molten metal spatter, and mechanical properties, ensuring that the gloves provide adequate protection during welding operations.

  Reach out to ask about the standard test results

• EN 388:2016

  EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

  Test results

  Abrasion Resistance Level 4

  EN 388:2016 uses a specific test method to measure abrasion resistance of safety gloves; the gloves’ material is subjected to sandpaper under pressure to observe the number of cycles needed to wear through the material. Level 4 in this standard indicates that the material withstood 8,000 cycles before a hole was made. Practically, this means that gloves rated at Level 4 for abrasion resistance offer very high resilience against wearing through, making them suitable for tasks involving significant contact with rough surfaces .

  Tear Resistance Level 4

  EN 388:2016 is a European standard that establishes criteria for assessing the protection provided by gloves against mechanical hazards, including tear resistance. The Tear Resistance Level 4 classification represents the highest level of tear resistance defined by this standard, indicating that the gloves can withstand the most substantial forces before tearing. According to the testing methodology, gloves are evaluated by measuring the force required to tear a sample of the glove material, with Level 4 requiring a force of over 75 Newtons to initiate and propagate a tear. This high level of tear resistance is ideal for use in environments where gloves are subjected to significant stress and potential damage, such as in heavy industry, construction, and handling of materials with sharp edges. Gloves achieving this level offer superior durability and are essential for ensuring user safety in high-risk mechanical settings, thereby enhancing work efficiency and reducing the frequency of glove replacement.

  Puncture Resistance Level 3

  The European Norm (EN) 388:2016 standard includes guidelines for assessing the puncture resistance of gloves, where a Puncture Resistance result of Level 3 signifies that the glove material can withstand a force of between 100 to 149 Newtons before being punctured. This result is crucial for ensuring that gloves provide an adequate level of protection against punctures when used in moderate risk environments, offering users safety from potentially harmful sharp objects. The test procedure for determining this metric involves measuring the amount of force required to puncture the glove using a standard-sized stylus. The stylus is pressed against the glove material at a constant speed until a puncture occurs. The weight needed to achieve the puncture is then recorded as the glove's puncture resistance level. For procurement professionals, this result implies that gloves rated at this level are suitable for tasks where there is a significant risk of encountering puncturing hazards, such as handling building materials, waste management, or assembly line work involving mid-level sharp objects.

  Cut Resistance, ISO 13997 Level X

  The standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed.

  Cut Resistance, Coup Test Level 1

  The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.

• EN 407:2004

  EN 407:2004 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:1994 and it's intended to protect the users against thermal risks, such as heat and flame, and to help them to choose a suitable glove for their specific application.

  Test results

  Heat Contact Level 1

  The standard EN 407:2004 on Protective gloves against thermal risks, including the testing for contact heat at Level 1, is designed to assess the protection level of gloves when exposed to thermal hazards. A Level 1 result on the contact heat resistance indicates basic protection where the glove can delay the transfer of heat from a contact source at 100°C for at least 15 seconds before the inside of the glove reaches a temperature increase of 10°C. The test method involves placing the outer surface of the glove in contact with a hot probe of defined dimensions and temperature, while the rate of temperature rise of a calorimeter on the inside of the glove is measured. This measurement provides a straightforward metric for assessing the thermal protection offered by the glove at low-level exposure. Practically, gloves rated at Level 1 for contact heat are suitable for environments where exposure to thermal risks is minimal and not excessively severe, making them adequate for certain low-risk industrial, laboratory, or handling applications where brief contact with warm objects is common.

  Heat Convection Level 3

  EN 407:2004 is a European Standard that specifies the requirements and test methods for protective gloves intended to protect against thermal risks, including heat from convection. The standard classifies the level of protection gloves provide against different forms of heat and fire. For the test result "Level 3" under EN 407:2004 in the category of Heat Convection, this level indicates that the glove provides moderate protection against convective heat. Specifically, it signifies that the glove can withstand a heat transfer index (HTI) of 10 to 20 seconds before the user would begin to feel pain from a heat source, offering substantial protection in environments where exposure to moderate levels of convective heat occurs.

  Radiant Heat Level X

  EN 407:2004 is a European standard that sets the requirements for protective gloves to defend against various thermal hazards, including radiant heat. The designation Radiant Heat Level X indicates that the gloves have not been tested for this specific type of protection, or they did not meet the minimum criteria established by the standard for resisting radiant heat. This means that these gloves are not certified for protection against radiant heat, which involves the transmission of heat through infrared rays from a heat source without direct contact. The lack of a specific radiant heat protection level suggests that users should not rely on these gloves for tasks where significant exposure to radiant heat is expected. Instead, these gloves might be suitable for other types of thermal risks for which they are certified, ensuring users select the appropriate type of protective glove based on the specific hazards present in their working environment. This classification assists in preventing inappropriate glove use and enhancing worker safety by clearly indicating the limitations of the glove's protective capabilities.

  Metal Splash Resistance Level 4

  EN 407:2004 is a European standard focused on assessing the protective capabilities of gloves against thermal risks, including hazards such as molten metal splashes. Metal Splash Resistance Level 4 represents an advanced level of protection, where the gloves are designed to handle substantial exposure to molten metal. This performance level signifies that the gloves can effectively resist at least 35 droplets of molten metal, protecting the wearer without the metal penetrating the glove material significantly. The testing involves simulating conditions where molten metal is splashed onto the glove, assessing the glove's ability to prevent molten metal from sticking and causing burns. Gloves that achieve Level 4 are ideal for heavy industrial applications such as steel mills, foundries, and welding, where frequent and substantial contact with molten metal occurs. This level of protection is crucial for maintaining safety and preventing serious injuries in environments with high thermal risks.

  Molten Metal Resistance Level X

  EN 407:2004 is a European standard that provides specifications for protective gloves to safeguard against thermal risks, including the exposure to molten metals. The designation Molten Metal Resistance Level X indicates that the gloves have not been tested for this specific risk, or they failed to meet the minimum requirements set out in the standard for protection against molten metal splashes. This means that the gloves are either unsuitable for use in environments where there is a risk of contact with molten metals, or additional testing is required to determine their suitability. Typically, such a classification implies that the gloves should not be used for handling molten metals and should only be considered for other types of thermal risks specified in the standard, where molten metal exposure is not a concern. This classification helps in ensuring that users select the right type of glove based on the specific hazards present in their working environment, thereby preventing inappropriate use and enhancing safety.

  Burning Behaviour Level 4

  Level 4 requires the material to have an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds after exposure to flame. This level offers substantial protection for handling or exposure to fire, suitable for environments where there is a significant risk of intense and immediate contact with flames.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.