Multi Jacket

Standards and labels

• EN 11611:2015

  Protective clothing with the EN 11611:2015 rating is tested for protection against molten metal splashes, limited flame spread, radiant heat from welding, and reduced electrical shock risk. This ensures professionals in welding and allied processes are protected from common hazards, helping to minimize injuries.

  Test results

  Welding Protection Class 1

  This garment offers protection for less hazardous welding work. It protects the wearer against small splashes of molten metal, brief contact with flames, and radiant heat from the welding arc.

• EN IEC 61482-1-2:2018

  Protective clothing with the EN IEC 61482-1-2:2018 rating is tested for its resistance to the thermal effects of an electric arc flash using a "box test" method. This ensures the garment provides a certified level of protection, significantly reducing the risk of burn injuries from unexpected electrical incidents.

  Test results

  Low-voltage Circuit Arc APC 1

  This garment protects you from the thermal hazards of a sudden electric arc flash. It is rated Arc Protection Class 1 (APC 1), tested to shield against a 4kA short circuit electric arc.

• EN 13034:2005

  Protective clothing, such as coveralls and aprons, with the EN 13034:2005 rating are tested for limited protection against light spray, liquid aerosols, or low-volume splashes of liquid chemicals. This means the clothing provides a barrier against minor chemical exposure, allowing you time to safely remove it before chemicals penetrate.

  Test results

  Liquid Chemical Protection Type 6

  Provides protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is intended for use in low-risk situations where a full chemical barrier is not required, such as industrial cleaning or maintenance.

• EN 1149-5:2008

  Protective clothing with the EN 1149-5:2008 rating is tested for its ability to safely dissipate electrostatic charges and prevent sparks. This protects wearers in environments where flammable gases, liquids, or dust could create an explosive atmosphere. It reduces the risk of accidental fires or explosions from static discharge.

  Test results

  Material Performance Tested

  This garment's material is tested to reduce static electricity buildup. It helps prevent sparks that could cause a fire or explosion in certain work environments, keeping you safer around flammable materials or sensitive electronics.

• EN 11612:2015

  Protective clothing, including garments, gaiters, hoods, and overboots, with the EN 11612:2015 rating are tested for protection against various heat and flame hazards like limited flame spread, convective heat, radiant heat, and splashes from molten metals. This ensures the clothing meets minimum safety standards for specific thermal risks, helping you choose gear that provides essential protection in hazardous environments.

  Reach out to ask about the standard test results

• EN ISO 20471:2013

  High-visibility clothing with the EN ISO 20471:2013 rating is tested for its ability to visually signal the wearer, including the color, reflectivity, and placement of materials, even after washing. This ensures you are clearly seen in low light or near moving vehicles, significantly enhancing your safety.

  Test results

  Reflective Strip Area Grade 2

  This garment provides an intermediate level of visibility for use in moderate-risk environments. It is suitable for work near traffic with speeds up to 60 km/hour, featuring a specified area of fluorescent material and reflective strips.