Standards and labels

• EN 61482-2:2020

  EN 61482-2:2020 is a European standard that sets safety requirements for protective clothing against electric arc thermal hazards. This standard specifically deals with the protection of the body and limbs (excluding hands and feet) against electric arc thermal hazards from an electric arc. It defines the performance levels for protective clothing, including the level of protection against electric arc thermal hazards, the arc thermal performance and the classification of clothing. The standard also includes test methods to measure the performance of the clothing, such as measuring the incident energy on the clothing and the flame spread. The test results should show that the clothing meets the minimum requirements for protecting the wearer from electric arc thermal hazards.

  Reach out to ask about the standard test results

• EN IEC 61482-1-1:2019

  EN IEC 61482-1-1:2019 is a European standard that specifies the requirements and test methods for flame-resistant clothing for electric arc protection. It lays out minimum performance requirements for the design, construction, and performance of flame-resistant clothing, as well as test methods to measure its effectiveness in protecting the wearer from an electric arc. Test results may include information on the clothing's arc protection performance, thermal protection, and flammability. This standard is for flame-resistant clothing that is intended for use in electrical environments where the risk of an electric arc is present. It covers the general requirements for flame-resistant clothing for electric arc protection and test methods for the determination of the arc protection performance of materials and clothing.

  Test results

  Second Degree Burn 50 % ATPV

  The EN IEC 61482-1-1:2019 standard specifies the requirements and test methods for materials and garments used for protective clothing against the thermal hazards of an electric arc. The Second Degree Burn 50 % ATPV result refers to the Arc Thermal Performance Value at which there is a 50% probability of a wearer sustaining a second-degree burn through the fabric, when exposed to an electric arc. The test is conducted using a controlled arc exposure, where a fabric sample is subjected to an electric arc generated by a specific current and voltage for a specified period of time. Sensors measure the amount of heat transmitted through the fabric to a calorimeter. The calories per square centimeter (cal/cm²) required to cause second-degree burn injuries on human skin are determined. This ATPV value is important as it helps in selecting the correct level of protection required for workers exposed to electric arc hazards. This type of result depicts a balance between protection and required wearability of the fabric, ensuring that the garment not only provides thermal protection but also remains comfortable enough for regular use by electrical workers.

• EN 1149-5:2008

  EN 1149-5:2008 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. The standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

  Test results

  Material Performance Tested

  The EN 1149-5:2008 standard specifies the performance requirements for material used in protective clothing designed to avoid incendiary discharges. The test result Tested means that the material has undergone relevant evaluation procedures to confirm its static dissipative properties. These tests generally involve measuring the electrical resistance of the material in ohms (Ω) to determine its capability to dissipate electrostatic charges and prevent sparking that could ignite flammable substances. The practical implications of this result for the respective product category (like protective workwear for use in explosive atmospheres) are significant, as it ensures that the clothing provides a level of protection against electrostatic discharges, potentially reducing the risk of fire or explosion in environments with flammable gases, vapors, or dusts.

• EN 11612:2015

  EN 11612:2015 is a European standard that specifies the requirements for protective clothing against heat and flame. This standard defines performance requirements for material, design, and testing of clothing that protects the wearer from heat and flames. Testing includes measuring the clothing's resistance to heat and flame, as well as its ability to self-extinguish. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

  Reach out to ask about the standard test results

• EN 11611:2015

  EN 11611:2015 is a European standard that specifies the requirements for protective clothing for use in welding and allied processes. This standard defines performance requirements for material, design, and testing of clothing that protects the wearer from heat and flames. Testing includes measuring the clothing's resistance to heat and flame, as well as its ability to self-extinguish. Pass/fail results are based on the clothing meeting or not meeting the specified requirements.

  Reach out to ask about the standard test results

• EN 13688:2013

  EN 13688:2013 is a European standard that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• EN 15614:2007

  EN 15614:2007 is a European standard that sets requirements for the performance, testing and labeling of automatic swing doors. It includes requirements for safety, durability and accessibility. Test results must show that the product meets these requirements before it can be labeled with the EN 15614:2007 mark.

  Reach out to ask about the standard test results

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.