Over 12,000 satisfied customers
Product description
Moldex Air 3205 - Valved particle filter in a pack of 10. High quality respirator protects against dust, fumes and vapours. Classification FFP3 NR D. Comfortable to wear, stays in shape thanks to durable construction and DuraMesh material. Very low breathing resistance. 260% increase in filtration area thanks to layered filtration technology. ActivForm seal adapts to the shape of the face. Juha Rantanen Oy is the distributor of the product.
Color is a visual characteristic of objects, surfaces, or light that is determined by the way it reflects or emits light. Color can be described by its hue, saturation, and brightness. The requirements for what is considered a "color" can vary depending on the context, but generally it should be a visual characteristic of an object, surface, or light that is determined by the way it reflects or emits light.
A single valve refers to a type of valve that controls the flow of a fluid or gas through a single opening. It consists of a valve body and a valve element (such as a ball, disk, or diaphragm) that moves to open or close the valve. Single valves can be used to control the flow of a variety of fluids, such as water, air, gas, or steam, and can be operated manually, electrically, or pneumatically. The requirements for a single valve are that it should be able to control the flow of fluid or gas, it should be able to open or close the valve quickly and easily, it should be able to maintain a tight seal when closed, it should be durable and resistant to wear and tear, it should be easy to install and maintain, it should be safe for people to use. Single valves are often used in industrial, commercial and residential settings for controlling the flow of fluids or gases.
The mask shape refers to the physical design of a mask and how it fits over the face. The requirements for mask shape can vary depending on the intended use and personal preference. Some common mask shapes include rectangular, circular, and cup-shaped. Some masks have a built-in nose wire that can be bent to fit the shape of the nose, and some have ear loops or headbands to hold the mask in place. The requirements for mask shape will depend on the intended use, the face shape and size, and the level of comfort needed. Some mask shapes may provide more coverage or better seal around the face, which can enhance the mask's effectiveness in filtration and protection.
Nose pad style refers to the design and shape of the padding on a mask or glasses that sits on the nose bridge to provide comfort and adjustability. The requirements for nose pad style can vary depending on the intended use and personal preference. Some common nose pad styles include: Soft silicone pads: flexible and conforms to the shape of the nose Adjustable metal nose pads: can be bent to fit the shape of the nose Gel nose pads: provide cushioning and comfort No nose pad: some masks or glasses do not have nose pads. The requirements for nose pad style will depend on the intended use, the face shape and size, and the level of comfort needed. Some nose pad styles may provide better seal around the nose, which can enhance the mask's effectiveness in filtration and protection.
A strap style refers to the design of a strap, which is a band or cord that is used to hold something in place or to carry something. There are many different types of straps, such as straps for bags, straps for shoes, and straps for clothing. Requirements can vary depending on the product, but generally, straps should be durable and comfortable to use.
- Respiratory Protection
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN 149:2001+A1:2009 is a European standard for filtering half masks for protecting against particles and it is an amendment of EN 149:2001. It outlines additional requirements for mask design and performance testing. The mask must be able to filter a certain percentage of particles, have good breathability, and fit securely to the face. The test results shows how well the mask filters and how easy it is to breathe through, also it includes a test for the mask's ability to fit securely to the face. It also specifies the mask's ability to filter out specific airborne particles like dust, mist, and fumes. It includes additional requirements for the performance of the mask, such as the ability to seal against the face and the mask's durability.
Test results
Reusability NR - Not ReusableThe standard EN 149:2001+A1:2009 designates a classification for filtering half masks, distinguishing between those that are re-usable (R) and non-reusable (NR). When a mask is classified as NR - Not Reusable, as per the result identified for EN 149:2001+A1:2009 NR, it implies that the mask is intended for single use only and should not be used more than once. The test method for determining reusability under this standard involves assessing the mask's material integrity, filter efficiency, and structural stability after simulated use, which might include cleaning, disinfection, and aging procedures. The practical implications of this result are significant; masks labeled as NR must be discarded after one use, highlighting a critical consideration for procurement professionals in terms of inventory, cost management, and usage protocols to ensure safety and compliance.
Dolomite Test DThe EN 149:2001+A1:2009 Dolomite Test, conducted within the framework of EU standards, assesses the resistance of respiratory protective filter masks to clogging by dolomite dust, thus ensuring longer-lasting filter performance under dusty conditions. A result labeled as D in the context of this test indicates that the mask has passed the dolomite dust clogging test and can maintain good breathing resistance over an extended period in a dusty environment, making it suitable for use in high particulate environments. The test method involves exposing the respiratory mask's filter to dolomite dust under controlled conditions and measuring its resistance to clogging (breathing resistance before and after exposure). After successfully passing this test, the mask can be marked with the letter D to signify its performance level, assisting employers or workers in making informed decisions regarding the level of respiratory protection required for specific industrial settings.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
Moldex delivery terms
Free delivery when you order more than 500,00 € from Moldex
Supplier shipping fee 17,50 €
Brand minimum 0,00 €
Moldex 3205 Particle filter FFP3, 10 pcs
94,88 € / package (VAT incl.)
75,60 €
A package contains 10 pcs
7,56 € / piece
In a package
10 pieces
Moldex
Delivery time: 3 business days
Supplier shipping fee 17,50 €
Free shipping on orders over 500,00 €
Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
Recommended products
List products you’re looking for and we’ll find the best products and prices for you – all for free.
We’ll help you find the right products and pricing for your business - all for free.
Product expert / ---