HAIX TREKKER MOUNTAIN 2.0 S3 Boot Cut Protection Class 1, Size 14.0 / 50
Product description
Upper material: Oiled nubuck leather, hydrophobic, breathable (7.0 mg/cm²/h), 2.6-2.8 mm thick. Cut protection: Cut protection level 1 (20m/sec.), in accordance with EN ISO 17249:2013 AC:2014. Inner lining: GORE-TEX® Performance; waterproof and breathable. Highly abrasion-resistant lining fabric with fleece interlayer. Optimum climate comfort for all seasons under the most demanding conditions. Increased chemical protection. Synthetic/fleece insole. Moisture-absorbing synthetic/fleece insole. Dimensionally stable, torsion-resistant, reduces punctual pressure (e.g. from stones). Insole: Anatomically shaped insole with very good moisture absorption and quick drying, replaceable and washable. HAIX® Protective steel toe cap: Anatomically shaped protective steel toe cap for the highest safety requirements. HAIX® Protective sole: Flexible, metallic, lightweight and penetration-resistant sole insert. HAIX® CO System: Pressure relief, cushioning, correction of foot position, body alignment and muscle balance. Sole: Rubber outsole with proven road/terrain profile, abrasion-resistant and non-slip, large beveled tread surface and increased rolling comfort. The rubber sole provides excellent insulation against cold and heat. The outsole is heat and fuel resistant and non-marking. In accordance with EN ISO 20345:2011. HAIX® Climate System: The HAIX Climate System uses the pumping motion that occurs when walking and transports moisture to the ventilation openings on the shaft and tongue. Miscellaneous:
Identifies the protective material in the toe cap that shields against impacts and compression. Different materials offer varying levels of protection, weight, and comfort.
The method used to secure the shoe to your foot, affecting ease of putting on/removing, adjustability for comfort, and workplace safety.
Indicates whether the footwear has protective reinforcement (Safety) or no special toe protection (Plain), affecting workplace safety compliance and injury prevention.
Offers robust defense against underfoot hazards. A reinforced sole prevents sharp objects from piercing through, protecting feet in risky environments.
Enhances stability on slick surfaces, reducing the risk of slips and falls. Designed for reliable grip and secure footing in various work environments.
Withstands degradation from oil exposure, maintaining sole integrity and extending shoe life. Ensures reliable traction in oily environments.
- Cold Protective
- Cut Resistant
- Heat & Flame Resistance
- Water Resistance
- Slip Resistant
Request a free sample
Test first and buy later. Visit any product page to request your free sample.
Standards and labels
EN ISO 17249:2013 is a standard that defines the requirements and test methods for protective gloves used in thermal risks protection. It specifies the performance requirements for protection against thermal risks such as contact heat and flame. The requirements include resistance to heat and flame, and freedom from holes. The test results include the level of protection against thermal risks, and the results of visual inspection. It also includes test procedure for gloves and gives guidelines for the selection, care and use of gloves. It gives also the methods for evaluating the thermal risk protection properties of gloves and the performance levels that can be expected. The standard also includes the requirements for labeling and information to be provided by the manufacturers and suppliers of gloves for thermal risks protection. This version of the standard replaces the previous version EN ISO 17249:2004/A1:2007 and includes updates to the test methods and requirements.
Test results
General Requirements HROThe HRO result listed in the standard EN ISO 20345:2011 pertains to the heat resistance of the outsole of safety footwear. This test result confirms that the outsole is capable of withstanding exposure to high temperatures without degrading its physical properties and performance. The test method requires that the outsole of the footwear be exposed to 300°C for a minimum of 60 seconds under specified conditions, during which the outsole should not melt or crack, ensuring that it continues to provide protection against hot environments. Since the HRO classification attests to heat resistance, this feature is particularly important in industries such as metallurgy or construction, where contact with hot surfaces is a common hazard. Understanding this result can assist procurement professionals in sourcing appropriate safety footwear that meets the required durability and performance in high-temperature working conditions.
General Requirements S3The EN ISO 20345:2011 standard specifies the general safety requirements for protective footwear used in various industries. The S3 designation under this standard means the footwear has met certain criteria, including basic toe protection, anti-static properties, energy absorption of the seat region, water resistance, fully enclosed heel, cleated outsole, and penetration resistance by a steel midsole. This classification involves specific test methods like compression and impact tests on toe protection, antistatic resistance tests, energy absorption verification at the heel section, water penetration, and absorption tests to ascertain the upper material's resistance, and penetration resistance tests to ensure the protective features of the outsole and midsole. For industries requiring protective footwear that can withstand mechanical risks, moisture, and sharp objects, achieving an S3 result guarantees a high safety level, making footwear that meets this requirement suitable for environments with increased moisture and at risk of foot penetration by sharp objects.
General Requirements WRThe standard EN ISO 20345:2011 includes various general requirements for safety footwear, among which the WR test result indicates that the footwear has been certified as water-resistant. This test result specifically means that the footwear has successfully passed evaluations confirming its capability to prevent water penetration under specified conditions. The test method involves the footwear being subject to a dynamic water test, where it is exposed to mechanical action in the presence of water for a certain period to simulate wearing conditions in wet environments. The practical implication of this result for safety footwear is significant as it ensures that the footwear provides adequate protection against water ingress, which is vital for individuals working in environments where exposure to water or dampness is frequent. This certification lends reassurance that the footwear will maintain its performance and comfort in challenging wet conditions, thereby improving wearer safety and job performance.
General Requirements CIThe CI designation in the standard EN ISO 20345:2011 refers to the insulation performance of footwear against cold. This specification indicates that the footwear offers insulation against cold conditions, protecting the wearer's feet from low-temperature environments. The test method for determining this involves measuring the temperature decrease inside the footwear when exposed to cold conditions over a specified period. This performance is crucial for footwear used in conditions where exposure to cold is significant, ensuring safety and comfort for the wearer in such environments. The practical implications for safety footwear in this category include enhanced worker safety and performance in cold climates, applicable to industries such as construction, cold storage, and outdoor operations in winter conditions.
General Requirements HIThe General Requirements HI result in the standard EN ISO 20345:2011 indicates that the footwear has been evaluated for insulation against heat. This particular result implies that the footwear can offer a certain level of protection against heat, ensuring that the user's feet are insulated when exposed to high temperatures. The test for this requirement involves assessing the footwear's capacity to provide insulation from heat under controlled test conditions. Given the practical implications, this result suggests that the footwear is suitable for environments where exposure to heat is a significant factor, such as in foundries or steel mills, thereby safeguarding the wearer’s feet against thermal risks. This is crucial for procurement professionals when considering safety footwear for sectors where heat resistance is paramount, ensuring compliance with safety regulations and protective performance criteria.
General Requirements CRThe standard EN ISO 20345:2011 encompasses general requirements for safety footwear to ensure they provide adequate protection in various occupational environments. Rating 'CR' signifies that the footwear has a cut resistant upper ensuring enhanced protection. The test method involves assessing the material's resistance to splitting or cracking under certain conditions, which simulates real-world industrial hazards involving sharp objects or surfaces. Practically, this result ensures that the footwear is suitable for environments where there is a risk of materials splitting or getting caught, thereby providing essential safety benefits to the user.
CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.
Richard Leipold GmbH delivery terms
Free delivery for all Richard Leipold GmbH products
216,84 €
Price per pair
216,84 € / pair
Shipping fee is 6,68 € for orders under 150,00 €
Sold in units of one pair
Need larger quantities?
Other products you may like
Recently viewed
Need help?
Get help from our experts
Other products you may like
Similar products you may like
Recommended for you
Richard Leipold GmbH
Delivery time: 3 business days
Orders from 50,00 €
Supplier shipping fee 6,68 €
Free shipping on orders over 150,00 €



Find +150,000 products from hundreds of brands
Autonomous sourcing platform
The most efficient way to source and order supplies for your operations
Sourcing
Ordering
List products you’re looking for and we’ll find the best products and prices for you – all for free.
Need help?
Get help from our experts