Richard Leipold Nappa Leather Glove Length 35cm Split Leather Cuff CE CAT 2

Standards and labels

• EN ISO 21420:2020

  EN ISO 21420:2020 is a European standard that sets out the general requirements for hand protection, including comfort, fit, and dexterity.

  Reach out to ask about the standard test results

• EN 12477:2001/A1:2005

  EN 12477:2001, along with the amendment A1:2005, is a European standard that specifically addresses protective gloves for welders. The standard sets requirements and test methods for gloves designed to protect the hands and forearms from heat and splatter during welding operations. The amendment A1:2005 introduces updates and refinements to enhance the performance and reliability of the gloves, ensuring improved protection for welders. It may include additional requirements for factors such as dexterity, grip, and durability. Compliance with EN 12477:2001 and its amendment ensures that welders have appropriate gloves that meet the necessary safety standards.

  Reach out to ask about the standard test results

• EN 407:2020

  EN 407:2020 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal, and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:2004, it includes new requirements, testing methods and performance levels to ensure that the gloves provide better protection against thermal risks such as heat, fire and molten metal splash.

  Test results

  Burning Behaviour Level 4

  The EN 407:2020 standard specifies the requirements for protective gloves meant to guard against thermal risks like heat and/or fire. For Level 4 in the 2020 update of the standard, gloves must meet stringent requirements following exposure to fire. They should exhibit an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds. This level of protection is crucial for environments with a high risk of exposure to intense and sustained flames, offering maximum safety for the wearer in hazardous conditions.

  Heat Contact Level 2

  The EN 407:2020 standard revolves around the specification for protective gloves against thermal risks, such as heat and flame. A entry marked as Heat Contact result Level 2 indicates gloves that provide moderate protection against contact with heat, capable of resisting a specific temperature of up to 250°C for a minimum exposure time determined by the Level 2 requirements. This protective level is tested primarily to ensure that users of these gloves can safely handle moderately hot surfaces without sustaining heat injuries. During the test for Heat Contact, a sample glove segment is exposed to a heat source at a specific temperature, and the time taken for the temperature inside the glove to increase by a set number of degrees (typically by 24°C) is measured. This result implies that these gloves offer sufficient protection for tasks involving significant but not extreme temperatures, making them suitable for various industrial, mechanical, and cooking operations where intermediate heat protection is necessary.

  Heat Contact Level X

  The EN 407:2020 standard regarding Heat Contact result Level X specifies test results for protection against thermal hazards like heat contact for protective gloves. A Level X result indicates that the product has not been tested for this specific protection characteristic or that the result did not meet the minimum requirements established by the standard. The test method used to determine heat contact resistance involves applying a certain level of heat to the glove material and measuring the length of time it takes for the inside of the glove to increase in temperature by a certain degree. In practical terms, a Level X in heat contact means that the gloves may not provide significant protection against prolonged or significant contact with heated materials, making them unsuitable for certain operations involving high-heat exposure.

  Heat Convection Level 4

  EN 407:2020 is an updated European standard that outlines the performance requirements for protective gloves designed to defend against thermal risks, including heat from convection. Heat Convection Level 4 under this standard indicates a high level of protection, meaning the gloves are capable of significantly delaying the transfer of heat from hot gases or liquids. Specifically, Level 4 protection ensures that the gloves can resist increasing the inner temperature by more than 24°C for at least 18 seconds during exposure to convective heat. The test method involves exposing the glove to a controlled convective heat source, such as heated air or steam, and measuring how long it takes for the temperature inside the glove to reach the set increase. Gloves that achieve Level 4 are ideal for intense settings where exposure to sustained or high levels of convective heat is common, such as firefighting, handling hot gases, or working in industrial environments with steam or hot air emissions. This level of protection is critical for ensuring safety and reducing the risk of burns in environments with high heat hazards.

  Molten Metal Resistance Level 1

  EN 407:2020 is a European standard that sets the performance requirements for protective gloves intended to safeguard against thermal risks, including resistance to molten metal splashes. Molten Metal Resistance Level 1 indicates the lowest level of protection under this standard, where gloves are tested to withstand minimal exposure to molten metal. This test result implies that the gloves can handle at least 30 grams of molten iron without the metal penetrating the material and causing harm to the user. The testing method involves pouring a specified amount of molten metal on the glove and measuring how the glove material responds, particularly whether the molten metal sticks or penetrates through to the inside. Gloves achieving Level 1 are suitable for light industrial tasks where there is a low risk of exposure to small quantities of molten metal, providing basic protection and allowing workers to perform safely in environments like light metal fabrication or when handling materials close to molten metal under controlled conditions.

  Radiant Heat Level 3

  EN 407:2020 is a European standard that outlines the performance requirements for protective gloves intended to shield against various thermal risks, including radiant heat. Radiant Heat Level 3 signifies a higher degree of protection, indicating that the gloves are designed to effectively delay significant heat transfer from a radiant source. This level ensures that the gloves can protect the wearer for a minimum of 50 seconds before the temperature inside the glove increases. The test method involves exposing the glove to a controlled source of radiant heat and measuring the duration it takes for the heat to penetrate through the glove material to the point where it increases the inner temperature to a defined threshold. Gloves achieving Level 3 protection are suitable for more intense radiant heat environments, such as those found in steel mills, glass handling, and other industrial settings where substantial exposure to high levels of radiant heat occurs regularly. This enhanced protection is critical for maintaining safety and preventing thermal burns during prolonged exposure to high temperatures.

• EN 388:2016

  EN 388:2016 is a European standard for measuring the performance of protective gloves against mechanical risks (abrasion, cut, tear, and puncture). The standard includes test methods and performance requirements for gloves to be considered compliant. Test results are reported using a series of four numbers, each representing the performance level achieved in one of the tests.

  Test results

  Puncture Resistance Level 2

  The standard EN 388:2016 includes an assessment of Puncture Resistance, where Level 2 signifies that the material has met specific criteria for resistance against puncture. The result of Level 2 in puncture resistance means that the protective glove or material can withstand a force of 60 to 100 newtons before being punctured. The test method used involves using a standardized steel puncture probe that is pushed against the material at a specified speed until it pierces through it. In essence, achieving a Level 2 puncture resistance under EN 388:2006 suggests that the protective equipment offers moderate protection against punctures, making it suitable for environments where there is a risk of encountering sharp objects such as needles, but are not excessively sharp or exert very high force.

  Tear Resistance Level 2

  EN 388:2016 is a European standard that sets criteria for testing the mechanical risks for protective gloves, including abrasion, cut, tear, and puncture resistance. The Tear Resistance Level 2 designation indicates that the gloves have a moderate level of resistance to tearing. The test for tear resistance involves subjecting a sample of the glove material to a force until it tears, and the force required to initiate and propagate the tear is measured. Gloves that achieve Level 2 tear resistance can withstand between 25 to 50 Newtons of force. This level of tear resistance is suitable for tasks where gloves might face moderate stresses that could cause tearing, such as general handling and light industrial work where sharp or jagged materials are handled less frequently. These gloves provide reliable protection and durability in scenarios where some degree of mechanical risk is present but not excessively severe.

  Cut Resistance, ISO 13997 Level X

  The standard EN 388:2016, specifically its segment referring to ISO 13997 test, is designed to assess the cut resistance of materials used in protective gloves. A result denoted as 'Level X' means that test is not performed and the cut resistance of the product cannot be guaranteed.

  Cut Resistance, Coup Test Level 1

  The EN 388:2016 standard is dedicated to gauging the mechanical risks for hand protection where a Cut Resistance, Coup Test Level 1 indicates minimal resistance to cutting because material achieved between 1.2 and 2.5 cycles before being cut through during the test. It means that the product tested at this level offers basic protection against shallow cuts, suitable for tasks with low risk of cut injuries. The test method used involves a rotating circular blade under a fixed force making contact with the fabric or material being tested. The blade moves back and forth across the material until a cut-through is achieved. The number of cycles required to cut through the sample at a consistent speed determines the cut resistance, with Level 1 being the second lowest rating after level 0. Products at this level are applicable in scenarios where there are minimal hazards from sharp objects, hence ideal for light duties where there is no significant risk of deep cuts.

  Abrasion Resistance Level 3

  EN 388:2016 is a European standard that provides guidelines for assessing the protection levels of gloves against mechanical risks, such as abrasion, cuts, tears, and puncture. The Abrasion Resistance Level 3 indicates a higher level of protection, signifying that the gloves can resist more intensive wear from rough materials. According to the standard, the abrasion resistance test involves rubbing the glove material against sandpaper under a specified pressure until it is worn through. Level 3 abrasion resistance requires that the gloves withstand 2000 to 7999 cycles of abrasion. This enhanced level of durability is appropriate for tasks involving more frequent or more intense contact with abrasive surfaces, such as construction work, woodworking, and handling building materials. Gloves with Level 3 abrasion resistance offer a robust barrier against wear, extending glove life and providing increased protection for the wearer’s hands, thus reducing the risk of injuries in more demanding work environments.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.