JokaSafe JokaTherm Cold-Resistant Vinyl Protective Mitt

Standards and labels

• EN ISO 2286-3:1998

  Rubber or plastics-coated fabrics with the EN ISO 2286-3:1998 rating are tested for their precise thickness under a specific pressure. This ensures consistency in material thickness, helping you choose products with reliable insulation, durability, and overall quality for items like upholstery or tarpaulins.

  Reach out to ask about the standard test results

• EN ISO 374-1:2016

  Gloves with the EN ISO 374-1:2016 rating are tested for resistance against dangerous chemicals and microorganisms, including penetration, permeation, and degradation. This means you can choose gloves designed to protect your hands from specific chemical hazards, ensuring safer use in various tasks.

  Test results

  Specified Requirements Type A

  Provides the highest level of chemical protection for gloves, offering resistance against permeation for at least 30 minutes for a minimum of six specific chemicals. This makes it suitable for handling a variety of chemicals.

• EN ISO 7854:1997

  Rubber- or plastics-coated fabric products with the EN ISO 7854:1997 rating are tested for their resistance to damage from repeated flexing. This means the material has been assessed for how well it withstands bending and crumpling over time, indicating its durability and ability to maintain its integrity with use.

  Reach out to ask about the standard test results

• EN 388:2016

  Protective gloves with the EN 388:2016 rating are tested for resistance against mechanical risks like abrasion, cuts, tears, punctures, and optional impact. This rating helps you quickly identify and choose gloves that offer the right level of protection for your hands during various tasks.

  Test results

  Puncture Resistance Level 1

  Provides basic protection against punctures from blunt objects like splinters, not sharp points like needles.

  Tear Resistance Level 2

  Offers moderate resistance against snagging or catching on rough objects, preventing small rips from growing.

  Abrasion Resistance Level 3

  Provides good resistance against scraping, scratching, and rubbing on rough or abrasive surfaces.

  Cut Resistance, ISO 13997 Level X

  Provides the highest level of cut protection, passing a specialized test for materials that dull blades.

  Cut Resistance, Coup Test Level 1

  Provides minimal protection against cuts from a rotating blade under constant, low force.

• EN 420:2003+A1:2009

  Protective gloves with the EN 420:2003+A1:2009 rating are tested for general design, safe materials (innocuousness), water penetration, comfort, and dexterity. This ensures the gloves are safe, fit correctly, and allow you to perform tasks effectively without discomfort.

  Reach out to ask about the standard test results

• EN ISO 374-5:2016

  Gloves with the EN ISO 374-5:2016 rating are tested for resistance to penetration by microorganisms like bacteria, fungi, and viruses. This ensures the gloves provide a protective barrier, helping to shield you from harmful germs and potential infections.

  Test results

  Micro-organisms Bacteria & Fungi

  This product provides a protective barrier against bacteria and fungi. It has passed a penetration resistance test to ensure it prevents these micro-organisms from getting through, making it suitable for cleaning and handling contaminated materials.

• EN 374-2:2014

  Gloves with the EN 374-2:2014 rating are tested for their resistance to penetration, ensuring liquids and microorganisms do not leak through tiny holes or imperfections. This means the gloves provide an effective barrier, protecting your hands from direct contact with hazardous chemicals and microbes.

  Test results

  Penetration Resistance Tested

  This product has passed a leak test to ensure it is a waterproof and effective barrier against liquids, bacteria, and fungi. This protects your hands from contact with harmful microorganisms in various work environments.

• EN 16523-1:2015

  Protective clothing, gloves, and footwear materials with the EN 16523-1:2015 rating are tested for resistance to permeation by hazardous liquid chemicals, specifically how long it takes for a chemical to pass through the material. This ensures the product provides a dependable barrier, offering a measurable level of safety when handling dangerous liquids.

  Test results

  Permeation Contact Tested

  This product’s material resists liquid chemical breakthrough. It is tested for how long it takes a chemical to move through the material on a molecular level, offering protection for a specified time during continuous contact.

• EN 511:2006

  Gloves with the EN 511:2006 rating are tested for protection against convective cold (from air/wind), contact cold (from touching objects), and water penetration. This helps ensure your hands stay warm and protected in various cold conditions, preventing discomfort and cold-related injuries.

  Test results

  Convective Cold Level 4

  Provides the highest level of thermal insulation from cold air, offering maximum protection against penetrating cold and wind. These gloves are ideal for prolonged work in extremely cold and windy environments down to -50°C.

  Cold Contact Level 3

  Provides strong insulation when directly handling cold objects for extended periods. Ideal for tasks like working in cold storage, handling frozen goods, or prolonged contact with cold surfaces, keeping your hands warm and protected.

  Water Tightness Level 0

  This product does not protect against water. Under standard testing, water penetrated the material in less than 30 minutes. While not waterproof, it may still offer protection against convective and contact cold.

• REACH

  REACH stands for "Registration, Evaluation, Authorisation and Restriction of Chemicals" it is a regulation of the European Union that governs the registration, evaluation, authorization, and restriction of chemicals. The REACH regulation aims to ensure that the chemicals used in Europe are safe for human health and the environment. The regulation applies to all chemical substances, whether they are used in industrial processes or in everyday products such as cleaning products, paints, and cosmetics. Companies that manufacture, import or use chemicals in the EU must register the chemicals they produce or import, provide safety information and communicate the risks associated with the chemicals. This information will be used to assess the risks and determine if any further action is needed to protect human health and the environment.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.