Fristads Flamestat High Vis Bib Overall 2168 ATHF

Standards and labels

• EN 14404:2004

  EN 14404:2004 is a European standard that sets the rules for chimneys made of clay. The standard explains how the chimneys should be made, how strong and durable they must be, and how they should be tested to make sure they meet these rules. Possible test results include measurements of strength, stretchiness, and how well the chimneys resist fire. The standard helps make sure chimneys made of clay are safe to use.

  Reach out to ask about the standard test results

• EN ISO 20471:2013

  Test results

  Reflective Strip Area Grade 1

  The standard EN ISO 20471:2013 specifies requirements for high visibility clothing, ensuring that individuals are visible in various lighting conditions. A Grade 1 result for the Reflective Strip Area indicates that reflective tape is 0.10 m2 and fluorescent material is 0.14 m2. Grade 1 products are suitable for environments with lower risk levels where visibility is nonetheless essential. The test method for determining this grade involves measuring the area and reflectivity of strips on clothing under different light conditions, ensuring that they meet predefined criteria for visibility as outlined by EN ISO 20471:2013. In practice, a Grade 1 result means clothing is suitable for use in situations with ample separation from traffic or other hazards and where visibility is not compromised by environmental factors. This grade is typically suited for workers on sites where vehicles and equipment move at slow speeds .

• EN IEC 61482-1-2:2018

  EN IEC 61482-1-2:2018 is a European standard that specifies the safety requirements and test methods for clothing that is worn to protect the wearer from thermal hazards such as heat and fire. The standard lays out the minimum safety requirements for the design, construction and performance of the clothing, as well as the test methods for measuring its effectiveness in protecting the wearer from thermal hazards. Test results may include information on the clothing's thermal protection performance, flammability and other safety features. This standard is intended for use in industrial environments where the risk of thermal hazards is present, such as in welding, metal cutting and other operations that generate heat or fire. This standard applies to flame-resistant clothing for thermal hazard protection, and it includes the test methods to determine the thermal protection performance of materials and clothing.

  Test results

  Low-voltage Circuit Arc APC 2

  The standard EN IEC 61482-1-2:2018 addresses the testing requirements for protective clothing against the thermal hazards of an electric arc. The test result APC 2 signifies that the product falls under Arc Protection Class 2. This indicates a middle level of protection, as specified by the standard, where the product successfully withstands a definite level of energy exposure, providing a defined level of safety to the wearer. The test for this standard involves simulating an electric arc scenario to measure the clothing's capacity to resist the thermal effects. The test method, Box Test, incorporates specific configurations of electrodes and electrical settings to mimic the heat and pressure of an electric arc. The material or garment is subjected to this controlled environment to assess its protective characteristics. Understanding this classification is fundamentally important when procuring protective gear for environments with electrical hazards, as it directly relates to the safety and adequacy of the protective clothing in preventing burns from an electric arc.

• EN IEC 61482-1-1:2019

  EN IEC 61482-1-1:2019 is a European standard that specifies the requirements and test methods for flame-resistant clothing for electric arc protection. It lays out minimum performance requirements for the design, construction, and performance of flame-resistant clothing, as well as test methods to measure its effectiveness in protecting the wearer from an electric arc. Test results may include information on the clothing's arc protection performance, thermal protection, and flammability. This standard is for flame-resistant clothing that is intended for use in electrical environments where the risk of an electric arc is present. It covers the general requirements for flame-resistant clothing for electric arc protection and test methods for the determination of the arc protection performance of materials and clothing.

  Reach out to ask about the standard test results

• EN 13034:2005

  EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.

  Test results

  Liquid Chemical Protection Type 6 PB

  EN 13034:2005 specifies the performance requirements for protective clothing that offers limited protection against liquid chemicals, identified specifically as Type 6 PB (partial body protection). The 'Type 6 PB' designation implies that the protective garment has been tested and confirmed to provide effective defense against light spray and minor splashes of liquid chemicals, but only for parts of the body such as aprons, sleeves, or boots rather than full body suits. This standard tests the fabric's barrier effectiveness by applying a defined volume of liquid to the garment and assessing any penetration or repellence under controlled laboratory conditions. Garments achieving Type 6 PB classification are crucial for tasks in industries like chemical processing or handling where full body coverage is unnecessary, thereby offering flexibility and targeted protection, reducing the risk of chemical exposure to critical areas of the body.

• EN 61482-1-1:2009

  EN 61482-1-1:2009 is a European standard that sets safety requirements for protective clothing for electric arc. It defines the performance levels for protective clothing, including the level of protection against electric arc, the arc thermal performance and the classification of clothing. The standard also includes test methods to measure the performance of the clothing, such as measuring the incident energy on the clothing and the flame spread. The test results should show that the clothing meets the minimum requirements for protecting the wearer from electric arc hazards.

  Reach out to ask about the standard test results

• EN 61482-1-2:2007

  EN 61482-1-2:2007 is a European standard that sets safety requirements for protective clothing against the thermal hazards of an electric arc. It defines the performance levels for protective clothing, including the level of protection against electric arc thermal hazards, the arc thermal performance and the classification of clothing. The standard also includes test methods to measure the performance of the clothing, such as measuring the incident energy on the clothing and the flame spread. The test results should show that the clothing meets the minimum requirements for protecting the wearer from electric arc thermal hazards.

  Reach out to ask about the standard test results

• EN ISO 15797:2004

  EN ISO 15797:2004 is a standard that sets out the requirements and test methods for determining the performance of heat pumps. It covers both air-source and water-source heat pumps. The standard specifies the minimum requirements for thermal performance, energy efficiency, and noise level of heat pumps. Test results should demonstrate that the heat pump meets or exceeds the specified performance requirements.

  Reach out to ask about the standard test results

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.