Standards and labels

• EN 13034:2005+A1:2009

  Protective clothing with the EN 13034:2005+A1:2009 rating is tested for limited protection against liquid chemicals, such as light spray or splashes. This ensures the garment resists chemical penetration and repellency, allowing you to work safely with low-risk chemical exposure and remove it quickly if contaminated.

  Test results

  Liquid Chemical Protection Type 6 PB

  This garment offers partial body protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is suitable for low-risk situations where a complete chemical barrier is not required.

• EN 14126:2003

  Protective clothing and coveralls with the EN 14126:2003 rating are tested for resistance against penetration by infective agents like bacteria, viruses, and contaminated liquids and aerosols. This means the material provides a reliable barrier, helping to protect you from biological hazards and prevent the spread of germs.

  Reach out to ask about the standard test results

• EN 1149-5:2018

  Protective clothing with the EN 1149-5:2018 rating is tested for its ability to dissipate electrostatic charges. This prevents sparks that could ignite explosive atmospheres, keeping the wearer safe in hazardous environments.

  Test results

  Material Performance Tested

  This garment's material is designed to dissipate static electricity, preventing sparks that could ignite flammable or explosive atmospheres. It is intended for use as part of a total earthed system in hazardous environments like petrochemical refineries.

• PPE Category 3

  PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.