DS Safety Prosafe® 1FR Protective Coverall, Flame Resistant

Standards and labels

• EN ISO 14116:2015

  Test results

  Flame Spread Test Index 1

  EN ISO 14116:2015 is a European standard established to assess the flame spread characteristics of protective clothing materials. Its purpose is to ensure that protective clothing offers adequate protection against the spread of flames, reducing the risk of burn injuries to the wearer. The designation Index 1 indicates the lowest level of flame spread performance, suggesting that the material provides limited protection against flame spread. This result implies that the clothing material may ignite relatively easily and propagate flames to a limited extent. The test method used to determine this result typically involves subjecting the material to a flame for a specified duration and observing the extent and speed of flame spread. Practical implications of this result for the product category include indicating that the protective clothing may not be suitable for use in high-risk environments with significant flame exposure, emphasizing the need for higher levels of flame-resistant clothing to ensure worker safety in such conditions.

• EN 13034:2005

  EN 13034:2005 is a European standard that specifies the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemicals. This standard sets criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the clothing. It ensures that Type 6 protective clothing offers reliable protection for workers in industries where they may be exposed to liquid chemical hazards, but it may not be suitable for protection against airborne particles.

  Test results

  Liquid Chemical Protection Type 6

  EN 13034:2005 specifies the requirements and test methods for protective clothing that provides limited protection against liquid chemicals, designated as Type 6. The 'Type 6' classification indicates that the clothing has been tested and found capable of resisting light spray and minor splashes of liquid chemicals. This test method assesses the fabric's ability to prevent penetration from a synthetic blood solution sprayed at the garment at different angles and pressures, simulating realistic conditions where accidental chemical splashes might occur. Protective clothing that achieves this classification is essential for workers in industries such as chemical manufacturing, painting, or pesticide application, where there is a risk of exposure to harmful liquids but full immersion is not expected, thus enhancing worker safety by providing sufficient protection in low-volume chemical exposure scenarios.

• EN ISO 13982-1:2004

  EN ISO 13982-1:2004 is a European standard that specifies the requirements and test methods for Type 5 protective clothing designed to protect against airborne solid particles. It sets criteria for material resistance and construction to prevent penetration of hazardous particles such as dust, fibers, and powders. The standard ensures that the garments provide effective protection in industries where workers may be exposed to such particles, but it should not be relied upon for protection against liquid chemicals or vapors.

  Test results

  Airborne Solid Particle Protection Type 5

• EN 1073-2:2002

  EN 1073-2:2002 is a European standard that defines the requirements for measuring and evaluating the resistance of textiles to penetration of airborne radioactive particles. The standard includes procedures for measuring the ability of textile materials to prevent the penetration of radioactive particles through the fabric. The performance requirements specify the conditions for testing, as well as the evaluation criteria for determining resistance. Possible test results include a rating on a scale of 1-5, with 5 indicating the highest level of resistance to particle penetration.

  Reach out to ask about the standard test results

• EN 1149-1:1995

  EN 1149-1:1995 is a European standard that defines the performance requirements for protective clothing with electrostatic properties. The standard specifies that the clothing must have a surface resistance of at least 1x10^5 ohms and a charge decay rate of less than 2 seconds. Test results can include the measurement of surface resistance and charge decay rate.

  Test results

  Surface Resistance Tested

  The EN 1149-1:1995 standard is concerned primarily with determining the surface resistance of materials used to protect against the build-up of static electricity, which could result in sparking and potential fire hazards. A test result indicating Surface Resistance Tested affirms that the fabric or surface has been evaluated for its ability to dissipate electrical charges, suggesting a level of resistance quality that makes it suitable for environments where static control is crucial. The testing method involves applying a voltage to two electrodes placed on the material surface and measuring the resistance to the flow of current. High resistance indicates that the material holds charges, while low resistance indicates good charge dissipation capabilities. This characteristic is significant in industries like electronics or petrochemicals, where preventing electrostatic discharges is vital to safety and operational reliability.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.