Standards and labels

• EN 388:2016+A1:2018

  EN 388:2016+A1:2018 is a European standard that defines the requirements and test methods for safety gloves used in general mechanical risks. The standard specifies the requirements for the resistance against abrasion, cut, tear, puncture, and impact. Test results for EN 388:2016+A1:2018 include measurements of abrasion resistance, cut resistance, tear resistance, puncture resistance, and impact resistance. The standard is intended to ensure that safety gloves used in general mechanical risks provide adequate protection for the user.

  Reach out to ask about the standard test results

• EN 407:2004

  EN 407:2004 is a European standard that specifies the safety requirements for protective gloves for thermal risks. It sets rules for the design, construction, and testing of gloves that protect users from heat and fire. Testing includes measurements of contact heat, convective heat, radiant heat, small splashes of molten metal and flame resistance. The standard also includes requirements for labeling and instructions for use. This standard is an updated version of EN 407:1994 and it's intended to protect the users against thermal risks, such as heat and flame, and to help them to choose a suitable glove for their specific application.

  Test results

  Radiant Heat Level X

  EN 407:2004 is a European standard that sets the requirements for protective gloves to defend against various thermal hazards, including radiant heat. The designation Radiant Heat Level X indicates that the gloves have not been tested for this specific type of protection, or they did not meet the minimum criteria established by the standard for resisting radiant heat. This means that these gloves are not certified for protection against radiant heat, which involves the transmission of heat through infrared rays from a heat source without direct contact. The lack of a specific radiant heat protection level suggests that users should not rely on these gloves for tasks where significant exposure to radiant heat is expected. Instead, these gloves might be suitable for other types of thermal risks for which they are certified, ensuring users select the appropriate type of protective glove based on the specific hazards present in their working environment. This classification assists in preventing inappropriate glove use and enhancing worker safety by clearly indicating the limitations of the glove's protective capabilities.

  Molten Metal Resistance Level 3

  EN 407:2004 is a European standard that outlines performance requirements for protective gloves designed to shield against various thermal risks, including those posed by molten metals. Molten Metal Resistance Level 3 signifies a high level of protection, indicating that the gloves can effectively withstand more significant quantities of molten metal. Specifically, this level means the gloves can handle at least 120 grams of molten iron without allowing the metal to penetrate and cause injury. The test involves pouring a defined amount of molten iron onto the glove to assess its ability to prevent the molten metal from reaching the skin. Gloves achieving Level 3 are ideal for high-risk industrial applications, such as heavy foundry work, steel mills, and other settings where large amounts of molten metal are frequently encountered. This level of protection is crucial for ensuring safety in environments with substantial exposure to high temperatures and molten substances, protecting workers from severe burns and other thermal injuries.

  Metal Splash Resistance Level X

  The EN 407:2004 standard specifies different levels of protection for gloves against thermal risks, including metal splash resistance. A result marked as 'Level X' under this standard symbolizes that the glove material either did not meet the minimum requirements for testing or that no specific test was conducted for this hazard. The test for Metal Splash Resistance in EN 407:2004 involves exposing the glove material to molten metal splashes to determine how much molten metal is required to heat the glove material to a degree that it would cause pain or injury to the wearer. The practical implication of a 'Level X' rating is that gloves marked as such should not be relied upon for protection against risks of molten metal splashes, making them unsuitable for use in environments where exposure to this hazard is likely.

  Burning Behaviour Level 4

  Level 4 requires the material to have an afterflame time of no more than 2 seconds and an afterglow time of no more than 5 seconds after exposure to flame. This level offers substantial protection for handling or exposure to fire, suitable for environments where there is a significant risk of intense and immediate contact with flames.

  Heat Contact Level 3

  EN 407:2004 standard defines the resistance to heat and flames for protective gloves, with varying performance levels from 0 to 4 and X. The specified test result Level 3 in Heat Contact implies that the gloves can withstand a medium level of heat exposure while offering substantial protection to the wearer. This involves testing the gloves' material under controlled conditions to measure the temperature range at which the material can endure continued exposure before a temperature increase of 10°C is detected on the inside surface, typically due to heat transferring through the material. In practical terms, the Level 3 classification assures professionals dealing with moderate levels of heat, such as in certain manufacturing or engineering environments, that the gloves provide a reliable barrier against heat, which can be crucial for both safety and comfort during tasks involving heat exposure.

  Heat Convection Level 3

  EN 407:2004 is a European Standard that specifies the requirements and test methods for protective gloves intended to protect against thermal risks, including heat from convection. The standard classifies the level of protection gloves provide against different forms of heat and fire. For the test result "Level 3" under EN 407:2004 in the category of Heat Convection, this level indicates that the glove provides moderate protection against convective heat. Specifically, it signifies that the glove can withstand a heat transfer index (HTI) of 10 to 20 seconds before the user would begin to feel pain from a heat source, offering substantial protection in environments where exposure to moderate levels of convective heat occurs.

• EN 13997:1999

  EN 13997:1999 is a European standard for fire dampers. Fire dampers are devices that are installed in buildings to stop the spread of fire and smoke. The standard tells how these devices should be designed, installed, and checked to make sure they work well. It also tells how well the devices should work during a fire, like how long they can stop fire and smoke from spreading. Test results show if the fire dampers meet the requirements of the standard and work as they should during a fire.

  Reach out to ask about the standard test results

• Food Safe

  Food safe refers to the safety of food products that are used or consumed by people. In Europe, food safety is regulated by the European Union (EU) and the European Food Safety Authority (EFSA). These organizations set standards and requirements for food products to ensure they are safe to eat. To be considered "food safe" in Europe, a product must meet these standards and be free of harmful substances. This includes being free of harmful bacteria, pesticides, and other contaminants. Food products that do not meet these standards cannot be sold or used in the EU.