Cofra Melk Bib Overall Orange/Navy

Standards and labels

• EN ISO 20471:2013

  Test results

  Reflective Strip Area Grade 3

  The EN ISO 20471:2013 standard specifies the requirements for high-visibility clothing, with a specific focus on the reflective strip area, a crucial element for ensuring visibility in low-light conditions. A test result achieving Grade 3 indicates the highest level of reflectivity performance in this standard, ensuring optimal visibility and safety for the wearer in various lighting conditions. In grade 3 products reflective tape is 0.20 m2 and fluorescent material is 0.8 m2.The test methodology involves assessing the amount and quality of retroreflective material on garments. This is quantified under precise conditions to ensure that the reflective strips meet stringent visibility requirements even from significant distances or in poor lighting conditions. Garments that meet Grade 3 requirements are suitable for use in high-risk environments where being seen by others is crucial for safety, such as road construction sites, airport ground operations, and other scenarios with high vehicular traffic or complex visual backgrounds.

• EN 13034:2005+A1:2009

  EN 13034:2005 is a European standard that outlines the requirements and test methods for Type 6 protective clothing designed to provide protection against liquid chemical hazards. It specifies criteria for the fabric's resistance to penetration by liquid chemicals and establishes guidelines for the overall design and construction of the garments. The amendment A1:2009 introduces updates and refinements to enhance the performance and reliability of Type 6 protective clothing, ensuring improved protection for workers exposed to liquid chemical splashes and sprays. These standards are essential in industries where workers are at risk of encountering liquid chemical hazards, ensuring their safety and well-being.

  Test results

  Liquid Chemical Protection Type 6

  EN 13034:2005+A1:2009 specifies the requirements and test methods for protective clothing that provides limited protection against liquid chemicals, designated as Type 6. The 'Type 6' classification indicates that the clothing has been tested and found capable of resisting light spray and minor splashes of liquid chemicals. This test method assesses the fabric's ability to prevent penetration from a synthetic blood solution sprayed at the garment at different angles and pressures, simulating realistic conditions where accidental chemical splashes might occur. Protective clothing that achieves this classification is essential for workers in industries such as chemical manufacturing, painting, or pesticide application, where there is a risk of exposure to harmful liquids but full immersion is not expected, thus enhancing worker safety by providing sufficient protection in low-volume chemical exposure scenarios.

• EN 1149-5:2018

  EN 1149-5:2018 is a European standard that specifies the requirements for electrostatic dissipative (ESD) gloves. This standard defines performance requirements for material, design, and testing of ESD gloves. The gloves must be able to effectively discharge static electricity and protect the wearer from ESD. Testing includes measuring the surface resistance of the glove material and electrical resistance of the glove. Pass/fail results are based on the gloves meeting or not meeting the specified requirements.

  Test results

  Material Performance Tested

  The standard EN 1149-5:2018 pertains to the performance of materials with regard to their electrostatic properties, specifically testing for the charge decay characteristics. The test result Tested signifies that the material has been evaluated according to the specified methods and met the defined criteria for electrostatic properties under this standard. To determine this result, a set of specific test methods is deployed to assess the decay of electrostatic charge from the surface of the material. The test involves subjecting the material to an electrostatic charge and then measuring the rate and manner in which this charge dissipates. This ensures that materials such as those used in protective clothing are safe for use in environments where electrostatic discharge could pose a hazard, such as in certain industrial or medical settings where flammable substances are present. For procurement professionals, understanding that a product has been tested and meets EN 1149-5:2018 standards is crucial as it ensures the product's safety and suitability in environments susceptible to electrostatic risks.

• EN 343:2019

  EN 343 is a European standard for protective clothing against bad weather. It says clothes must be waterproof, breathable, and not let water in. It's used to protect workers in different industries like construction and transportation. Tests must show the clothing meets these standards.

  Test results

  Waterproofness Class 3

  EN 343:2019 is designed to ensure that protective clothing provides specific levels of protection against rain, considering its waterproof capabilities. Class 3 in this standard represents the highest level of waterproofness, indicating that the garment successfully resists a high volume of water penetration (more than 13000 Pascal Pressure units after pre-treatment). The test method used involves simulating wet weather conditions, where the fabric is exposed to varying degrees of water projections and pressures to evaluate its resistance. Fabrics that achieve Class 3 certification tend to have undergone rigorous testing such as high-pressure spray tests or being subject to a controlled volume of water for a defined period. These are particularly relevant for professional use in extremely wet environments where the highest level of water resistance is necessary, providing critical protection in conditions from heavy rain to immersion scenarios. This high classification impacts the practical usability of such clothing in industries such as outdoor work, marine activities, or emergency services where maximum protection from water exposure is critical for safety and performance.

  Breathability Class 3

  Breathability performance in the category of Class 3 under the standard EN 343:2019 reflects a high level (RET<20) of breathability for protective clothing. This category is designed to provide comfort and prolonged wearability in environments requiring good air permeability through the garment. Specifically, Class 3 is the highest class, indicating excellent breathability properties which are tested and certified to meet stringent regulations for vapor permeability and resistance. The practical implication of a Class 3 breathability result in EN 343:2019 is that the fabric offers superior breathability, making it suitable for use in garments worn in active work or in environments where higher air permeability is necessary to reduce the risk of heat stress and to maintain comfort during extended wear.

• EN 13688:2013

  EN 13688:2013 is a European standard that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• EN ISO 14116:2015

  Test results

  Flame Spread Test Index 3

  EN ISO 14116:2015 is a European standard established to assess the flame spread characteristics of protective clothing materials, with the aim of ensuring the safety of individuals working in environments with potential fire hazards. Its purpose is to evaluate the flame retardant properties of protective clothing and mitigate the risk of burn injuries. A designation of Index 3 indicates a limited level of flame spread performance, suggesting that the material offers moderate protection against the spread of flames. This result implies that the material may resist ignition to a certain degree and exhibit slower flame propagation compared to materials with lower index values. The test method used to determine this result typically involves subjecting the material to a controlled flame exposure and assessing the extent and speed of flame spread. Practical implications of this result for the product category include indicating that the protective clothing may provide adequate protection in environments with moderate fire risk, but additional precautions or higher levels of flame-resistant clothing may be necessary in higher-risk scenarios to ensure optimal safety for workers.

  Flame Spread Test Index 1

  EN ISO 14116:2015 is a European standard established to assess the flame spread characteristics of protective clothing materials. Its purpose is to ensure that protective clothing offers adequate protection against the spread of flames, reducing the risk of burn injuries to the wearer. The designation Index 1 indicates the lowest level of flame spread performance, suggesting that the material provides limited protection against flame spread. This result implies that the clothing material may ignite relatively easily and propagate flames to a limited extent. The test method used to determine this result typically involves subjecting the material to a flame for a specified duration and observing the extent and speed of flame spread. Practical implications of this result for the product category include indicating that the protective clothing may not be suitable for use in high-risk environments with significant flame exposure, emphasizing the need for higher levels of flame-resistant clothing to ensure worker safety in such conditions.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.