Blåkläder Multinorm Work Pants, Navy Blue/Yellow

Standards and labels

• EN 13034

  Protective clothing with the EN 13034 rating is tested for limited protection against small splashes, mists, or aerosols of liquid chemicals, including resistance to penetration and repellency. This helps ensure your safety by reducing skin exposure to common chemicals in low-risk environments.

  Reach out to ask about the standard test results

• EN ISO 20471:2013

  High-visibility clothing with the EN ISO 20471:2013 rating is tested for its ability to visually signal the wearer's presence in all light conditions, including daylight and vehicle headlights in the dark. This ensures the clothing makes you clearly visible to others, significantly reducing the risk of accidents in hazardous environments.

  Test results

  Reflective Strip Area Grade 1

  Provides the lowest level of visibility for low-risk situations. It is intended for use in off-road areas or where traffic speeds are below 30 km/h, such as in parking lots or warehouses.

• EN 61482-1-2

  Protective clothing for electrical workers with the EN 61482-1-2 rating is tested for how well materials and garments protect against the intense heat of an electric arc flash, classifying resistance at specific energy levels. This ensures the clothing reduces the risk of severe burns and injuries from electrical arc hazards, helping you choose the right level of protection.

  Reach out to ask about the standard test results

• EN 61482-1-1:2009

  Protective clothing with the EN 61482-1-1:2009 rating is tested for its ability to protect against the thermal hazards of an electric arc, specifically measuring the Arc Thermal Performance Value (ATPV) or Energy Break-open Threshold (EBT50). This means the clothing offers a measured level of protection from burns and material break-open in case of an electrical arc flash incident.

  Reach out to ask about the standard test results

• EN 14404:2004+A1:2010

  Knee protectors with the EN 14404:2004+A1:2010 rating are tested for protection against continuous pressure, penetration by sharp objects, and impact absorption. This ensures the knee pads provide adequate safety and comfort, helping to prevent injuries when kneeling.

  Reach out to ask about the standard test results

• EN 11611:2015

  Protective clothing with the EN 11611:2015 rating is tested for protection against molten metal splashes, limited flame spread, radiant heat from welding, and reduced electrical shock risk. This ensures professionals in welding and allied processes are protected from common hazards, helping to minimize injuries.

  Test results

  Welding Protection Class 1

  This garment offers protection for less hazardous welding work. It protects the wearer against small splashes of molten metal, brief contact with flames, and radiant heat from the welding arc.

• EN 11612:2015

  Protective clothing, including garments, gaiters, hoods, and overboots, with the EN 11612:2015 rating are tested for protection against various heat and flame hazards like limited flame spread, convective heat, radiant heat, and splashes from molten metals. This ensures the clothing meets minimum safety standards for specific thermal risks, helping you choose gear that provides essential protection in hazardous environments.

  Reach out to ask about the standard test results

• EN 1149-5

  Protective clothing with the EN 1149-5 rating is tested for its ability to dissipate electrostatic charges, preventing sparks. This protects you by reducing the risk of explosions in hazardous environments where flammable substances or gases are present.

  Reach out to ask about the standard test results

• EN 1149-3:2004

  Protective clothing with the EN 1149-3:2004 rating is tested for its ability to dissipate electrostatic charges from the material surface. This helps prevent static electricity buildup and reduces the risk of ignition in environments with flammable gases, vapors, or dust.

  Test results

  Electrostatic Properties Tested

  This material is tested to dissipate electrostatic charge. It prevents the build-up of static electricity, avoiding sparks that could ignite flammable materials or damage sensitive electronics. This is crucial for safety in potentially explosive atmospheres.

• EN 15797

  Workwear and protective clothing with the EN 15797 rating are tested for their ability to withstand industrial washing and drying processes. This standard ensures the garments maintain their shape, color, and protective properties after repeated intense cleaning, offering consumers durable and long-lasting products.

  Reach out to ask about the standard test results

• EN 61482-2:2020

  Protective clothing with the EN 61482-2:2020 rating is tested for protection against the thermal hazards of an electric arc, including extreme heat, flames, and metal splashes. This ensures the clothing helps prevent severe burns and injuries, providing critical safety for wearers near electrical hazards.

  Reach out to ask about the standard test results

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.