Standards and labels

• EN ISO 20471:2013

  Test results

  Reflective Strip Area Grade 2

  The EU standard EN ISO 20471:2013, which outlines requirements for high-visibility clothing, specifically includes criteria for the reflective strip area needed for different grades of visibility and safety. A Grade 2 result identifies that reflective tape is 0.13 m2 and fluorescent material is 0.5 m2. This rating is determined through a combination of tests that assess how effectively the garment’s reflective strips can reflect light in low visibility or night conditions. For items rated Grade 2, this typically means the product has been assessed to provide a good level of visibility and reflectivity that is deemed suitable for environments with some level of light or medium-low risk areas. It assures that the wearer will be adequately noticed by others, particularly in scenarios where visibility is critical for safety, such as road work at night or in adverse weather conditions.

• EN 13758-2:2003+A1:2006

  EN 13758-2:2003+A1:2006 is an amendment to the European standard EN 13758-2:2003. This amendment sets additional requirements for testing the performance of air filters used in ventilation systems. The standard defines test methods for measuring the filter's ability to remove gaseous pollutants such as odors and volatile organic compounds (VOCs) from the air. It also specifies test methods for measuring the filter's airflow resistance and filter leakage. The amendment also includes additional test methods for measuring the filter's ability to remove microorganisms and radioactive particles. Test results should show the filter's efficiency in removing gaseous pollutants, microorganisms and radioactive particles, as well as its airflow resistance and filter leakage. The standard also specifies labeling and documentation requirements for air filters that meet its performance requirements.

  Test results

  UVA & UVB Radiation UPF #,##

  The EN 13758-2:2003+A1:2006 standard outlines the criteria for assessing the Ultraviolet Protection Factor (UPF) of textiles intended to provide protection against ultraviolet (UV) solar radiation. The result indicates the level of ultraviolet protection afforded by the fabric. Specifically, this number represents how much UV radiation (both UVA and UVB) the textile can block. A higher UPF number equates to better UV protection, where a rating of 50 means that the fabric will allow only 1/50th of the sun's UV rays to pass through.The test method used to determine this result involves exposing the textile to a simulated solar spectrum and measuring the amount of UV radiation that penetrates the fabric. This standard ensures that the fabric's weave, thickness, color, and stretch, among other factors, are considered during testing. The results from this testing are crucial for manufacturers of sun-protective clothing, as they provide a measurable and standardized level of UV protection to be communicated to consumers. Products meeting a high UPF rating are particularly significant for consumers who require superior protection from UV radiation due to health concerns or environmental exposure considerations.

• EN 13688:2013

  EN 13688:2013 is a European standard that specifies the performance requirements for protective clothing. The standard includes requirements for safety, comfort, and durability, as well as tests for determining these properties. Protective clothing includes items like coveralls, aprons, and gloves that are worn to protect the wearer from hazards. Possible test results include resistance to chemicals, heat, abrasion and tearing, as well as breathability and comfort. The clothing can be tested under different conditions to check if it meets the standard's requirements.

  Reach out to ask about the standard test results

• Textiles

  Textiles are materials made from fibers, such as cotton, wool, or polyester. In Europe, there are rules for how textiles should be made, sold, and labeled. These rules are set by the European Union. These rules ensure that textiles are safe and do not contain harmful chemicals, that they are labeled correctly and that the use of certain dangerous chemicals are banned. These rules are set to protect the health and safety of consumers and the environment. Companies that make or sell textiles in the EU must comply with these rules.

• Oeko-Tex Standard 100

  Oeko-Tex Standard 100 is a product certification program for textiles, which is awarded by the Oeko-Tex Association. This program verifies that the textile products are free from harmful chemicals. To be able to use the Oeko-Tex Standard 100 label, a product must meet certain requirements set by the Oeko-Tex Association which include limits on the levels of harmful substances such as pesticides, heavy metals, and formaldehyde. The textile products are inspected and certified by Oeko-Tex, they can use the Oeko-Tex Standard 100 label on their packaging to show that they are free from harmful chemicals. This certification is for all types of textiles, from raw materials to finished products, and it is globally recognized.

• CE Marking

  CE Marking is a label that shows a product meets certain safety and environmental standards set by the European Union. To get the CE Marking, a company must test and certify their product meets these standards. CE Marking is required for many products sold in the EU, including electronics, machinery, toys and medical devices. It helps ensure that products are safe for consumers and the environment, and allows for easy trade within the EU.

• PPE Category 2

  PPE stands for "personal protective equipment." PPE Category 2 refers to equipment that is more complex, and has a higher level of risk. Examples of PPE Category 2 include safety helmets, ear protection, and fall arrest equipment. In Europe, PPE Category 2 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place and have to be audited regularly by a notified body.