Protective clothing with the EN 11611:2015 rating is tested for protection against molten metal splashes, limited flame spread, radiant heat from welding, and reduced electrical shock risk. This ensures professionals in welding and allied processes are protected from common hazards, helping to minimize injuries.

Test results

Protective clothing with the EN 61482-2 rating is tested for protection against the thermal hazards of an electric arc, such as intense heat and flames. This means the clothing helps prevent severe burns by limiting heat transfer during an arc flash incident, enhancing user safety.

Protective clothing with the EN IEC 61482-1-1 rating is tested for its ability to protect against the thermal hazards of an electric arc, measuring its arc rating (ELIM, ATPV, or EBT). This ensures the garment provides a specified level of protection against heat and potential burns from an electric arc flash.

Protective clothing with the EN 1149-5 rating is tested for its ability to dissipate electrostatic charges, preventing sparks. This protects you by reducing the risk of explosions in hazardous environments where flammable substances or gases are present.

Protective clothing, such as garments, gaiters, hoods, and overshoes, with the EN 11612 rating is tested for protection against heat and flame, including limited flame spread, convective, radiant, and contact heat, plus molten metal splashes. This rating helps you choose apparel that provides reliable safety from various thermal hazards, ensuring your protection in environments with such risks.

PPE stands for "personal protective equipment." PPE Category 3 refers to equipment that is complex and provide the highest level of protection such as powered respirators, SCBA, and full body suits. In Europe, PPE Category 3 must meet certain safety standards set by the European Union, which means that it must be designed and manufactured to protect the user without causing harm. Companies that make or sell PPE must prove that it meets these standards. They also must have a quality management system in place, have to be audited regularly by a notified body and have to have a technical documentation.